This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.176-4(b)(5) | Federal Standard 191A | 1978 | Method 5762, Mildew Resistance of Textile Materials: Soil Burial Method | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 63, Subpart ZZZZ, Table 4, (2)(a)(iii)(1) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Coast Guard | 46 CFR 162.027-2(b) | ASTM F 1546 | 2012 | Standard Specification for Firehose Nozzles | ASTM International | |
Environmental Protection Agency | 40 CFR 282.65(d)(1)(i)(A) | IAUSTP | 1994 | Iowa Statutory Requirements Applicable to the Underground Storage Tank Program | State of Iowa | |
Coast Guard | 33 CFR 126.5(b) | NFPA 307 | 1995 | Standard for the Construction and Fire Protection of Marine Terminals, Piers, and Wharves | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.100(b)(1) | Drawing No. 78051-228/78051-229 | 1979 | Skin-Hybrid III | Reprographic Technologies | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(15)(iv) | ANSI Z88.2 | 1969 | Respiratory Protection | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 192.63(a)(1) | ASTM D 2513 | 1987 | Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing and Fittings | ASTM International | |
Environmental Protection Agency | 40 CFR 796.3500(b)(1)(ii) | ASTM D 1193 | 1977 | Standard Specification for Reagent Water | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1808-01(f)(17)(ii) | SAE J-1979 | 2007 | E/E Diagnostic Test Modes | Society of Automotive Engineers | |
Food and Drug Administration | 21 CFR 177.1040(c) Footnote 1 | FDA Publication | 2004 | Analytical Method for 10% Solution Viscosity of Tyril. | Food and Drug Administration, U.S. Department of Health and Human Services | |
Public Health Service | 42 CFR 52b.12(b) | BOCA National Building Code | 1996 | BOCA National Building Code | Building Officials and Code Administrators International | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(9) | SAE J-573d | 1968 | Lamp Bulbs and Sealed Units | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (36) | 3M Test Method 0222 | 1994 | Organochlorine Pesticides and PCBs in Wastewater Using Empore Disk | 3M Corporation | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Sulfate) | APHA Method 4500-SO4(2-) D | 1992 | Sulfate, Gravimetric Method with Drying of Residue | American Public Health Association | |
Food and Drug Administration | 21 CFR 177.2450(b)(3) | FDA Publication | 1989 | Amide-Imide Polymer Content--Analysis of Monomer Content | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 40 CFR 1065.703 Table 1 | ASTM D 4052 | 2011 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.136(b)(2) | ANSI Z41 | 1991 | Personal Protection-Protective Footwear | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA C-6.2 | 1996 | Guidelines for Visual Inspection and Requalification of Fiber Reinforced High Pressure Cylinders | Compressed Gas Association | |
Housing and Urban Development Department | 24 CFR 200.942(a)(1)(ix) | ASTM D 3936 | 1980 | Standard Test Method for Delamination Strength of Secondary Backing of Pile Floor Coverings | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.11(c) | NFPA 58 | 2004 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(1)(vi) | ASME B&PV Code | 1995 | Boiler and Pressure Vessel Code, Section III and Addenda, Subsection NH, Class 1 Components in Elevated Temperature Service, 1995 Addenda through the latest edition and addenda | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(ff)(4) | ANSI B30.6 | 1969 | Safety Code for Derricks | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (39) | APHA Method 6200 C | 1997 | Volatile Aromatic Organic Compounds by GC/PID Purge & Trap | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.25(a) Table Note 10 | NJDEP Publication | 1980 | Determination of Radium 228 in Drinking Water | State of New Jersey, Department of Environmental Protection | |
Technology Administration | 15 CFR 1150.1(b) | ASTM F 589 | 1985 | Standard Consumer Safety Specification for Non-Powder Guns | ASTM International | |
Environmental Protection Agency | 40 CFR 60.107a(d)(7)(vii) | ASTM D 4891 | 1989 | Standard Test Method for Heating Value of Gases in Natural Gas Range by Stolchiometric Combustion | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.1001(h) | SAE J-394 | 1969 | Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 59.401 Nonflat coating | ASTM D 523 | 1989 | Standard Test Method for Specular Gloss | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | MSS SP-6 | 2001 | Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-25 | 1977 | Visual Approach Slope Indicator (VASI) Systems (Through change 1, 1977) | Federal Aviation Administration, U.S. Department of Transportation | |
Interior Department | 43 CFR 11.18(a)(2) | DOI/WRC/-84/01 | 1984 | Chapter II of Economic and Environmental Principles and Guidelines for Water and Related Land Resources Implementation Studies | U.S. Department of the Interior | |
Rural Utilities Service | 7 CFR 1755.860(a)(6) | ASTM B 694 | 1986 | Standard Specification for Copper, Copper Alloy, and Copper-Clad Stainless Steel Sheet and Strip for Electrical Cable Shielding | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(12) | SAE J-394 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers | Society of Automotive Engineers | |
Coast Guard | 46 CFR 169.703(c)(5)(ii) | ABYC A-1 | 1993 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 183.320(d) | NFPA 70 | 1996 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (39) | ASTM D 3867B | 2004 | Standard Test Methods for Nitrite-Nitrate in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (12) Cyanide | APHA Method 4500-CN G | 1998 | Cyanide Amenable to Chlorination after Distillation | American Public Health Association | |
Coast Guard | 46 CFR 111.54-1(b) | UL 489 | 2000 | Molded-Case Circuit Breakers and Circuit Breaker Enclosures | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 108.503 | IMO Resolution A.649(16) | 1989 | Code for the Construction and Equipment of Mobile Offshore Drilling Units (MODU Code), with amendments of June 1991 | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 80.46(h)(1)(x) | ASTM D 5453 | 2012 | Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. N, 10.4.1 | ASHRAE 103 | 1993 | Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.135-7(b)(3)(ii) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Environmental Protection Agency | 40 CFR 1036.810(b)(3) | ASTM D 5291 | 2010 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 16 | Quanti-Tray® Method | 2002 | Quanti-Tray® Method | IDEXX Laboratories | |
Environmental Protection Agency | 40 CFR 435.41(ee) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(b)(7) | ASTM D 976 | 2011 | Standard Test Method for Calculated Cetane Index of Distillate Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 147.650(a)(5) | IDUIC regulations | 1977 | Department of Water Resources-Water Resources Board, Title 42, Chapter 17, Idaho Code, sections 42-1701, 42-1703, 42-1735 (Bobbs-Merrill 1977, section 42-1701A (Supp. 1984) | State of Idaho | |
Environmental Protection Agency | 40 CFR 63, Subpart UUUUU, Table 5, (3)(e) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Coast Guard | 46 CFR 52.01-135(a) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers |