Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
AI MSI-1 |
1981 |
Thickness Design--Asphalt Pavement for Highways and Streets
|
Asphalt Institute |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACI 213R |
1987 |
Guide for Structural Lightweight Aggregate Concrete
|
American Concrete Institute |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI/AAMA 1002.10 |
1983 |
Insulating Storm Products for Windows and Sliding Glass Doors
|
American National Standards Institute |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM E330 |
1990 |
Standard Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
NAS Publication 1571 |
1968 |
Criteria for Selection and Design of Residential Slabs-on-Ground, Report #33
|
National Academy of Sciences, Building Research Advisory Board |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI/AHA A135.4 |
1982 |
Basic Hardboard
|
American Hardboard Association |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
WQA S-300 |
1984 |
Point-of-Use, Low Pressure Reverse Osmosis Drinking Water Systems
|
Water Quality Association |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM C1048 |
1991 |
Standard Specification for Heat-Treated Flat Glass-Kind HS, Kind FT Coated and Uncoated Glass
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
FedSpec HH-I-1030B |
1980 |
Insulation, Thermal (Mineral Fiber for Pneumatic or Poured Application)
|
Federal Specifications Standards and Test Methods |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
UM Bulletin 62a |
1972 |
Factory-Applied Laminated Roofing Systems Based on Chlorosulfonated Polyethylene (CPSE)
|
U.S. Department of Housing and Urban Development |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ISWA IWS-089 |
2015 |
Insect Wire Screening (Wire Fabric)
|
Insect Screening Weavers Association |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM C223 |
1991 |
Standard Specification for Asbestos-Cement Siding
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACI 504R |
1977 |
Guide to Joint Sealants for Concrete Structures
|
American Concrete Institute |
Coast Guard |
|
24 CFR 200, Appendix A |
NFPA 70 |
1993 |
National Electrical Code
|
National Fire Protection Association |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI/APA 1 |
1984 |
Mosaic-Parquet Hardboard Slat Flooring
|
APA--The Engineered Wood Association |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
AFPA Publication |
1991 |
National Design Specification for Wood Construction with Supplemental Design Values for Wood Construction
|
American Forest and Paper Association |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM C754 |
1988 |
Installation of Steel Framing Members to Receive Screw-Attached Gypsum
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
SGCC Publication |
1990 |
Certified Products Directory
|
Safety Glazing Certification Council |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI/AHA A194.1 |
1985 |
Cellulosic Fiber Insulation Board
|
American Hardboard Association |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
CABO Model Energy Code |
1992 |
Model Energy Code
|
Council of American Building Officials |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACI 347 |
1978 |
Recommended Practice for Concrete Formwork
|
American Concrete Institute |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
UM Bulletin 60 |
1970 |
Field Glued Plywood and Wood Frame Structural Floor Systems
|
U.S. Department of Housing and Urban Development |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM C864 |
1990 |
Dense Elastomeric Compression Seal Gaskets, Setting Blocks and Spacers
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI/ACI 214 |
1977 |
Recommended Practice for Evaluation of Strength Test Results of Concrete
|
American Concrete Institute |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
NWWDA I.S. 3 |
1988 |
Industry Standard for Wood Sliding Patio Doors
|
National Wood Window and Door Association |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACI 515.1R |
1985 |
Guide to the Use of Waterproofing, Dampproofing, Protective and Decorative Barrier Systems for Concrete
|
American Concrete Institute |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
UM Bulletin 67 |
1975 |
Polycarbonate Plastic Sheets for Glazing
|
U.S. Department of Housing and Urban Development |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
FedSpec L-S-125B |
1972 |
Screening, Insect, Non-Metallic
|
Federal Specifications Standards and Test Methods |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
AAMA 1504 |
1988 |
Voluntary Standards for Thermal Performance of Windows, Doors and Glazed Wall Sections
|
American Architectural Manufacturers Association |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI/AAMA 101 |
1988 |
Voluntary Specifications for Aluminum Prime Windows and Sliding Glass Doors
|
American National Standards Institute |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
WQA S-200 |
1988 |
Household and Commercial Water Filters
|
Water Quality Association |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
TCA Publication |
1993 |
Handbook for Ceramic Tile Installation
|
Tile Council of America |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
UM Bulletin 70a |
1982 |
Particleboard Interior Stair Treads and Certification Program
|
U.S. Department of Housing and Urban Development |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
FedSpec SS-S-346C |
1968 |
Siding (Shingles, Clapboards, and Sheets), Asbestos Cement
|
Federal Specifications Standards and Test Methods |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
NFPA 54 |
1988 |
National Fuel Gas Code
|
National Fire Protection Association |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI Z34.1 |
1987 |
Certification, Third-Party Certification Program
|
American National Standards Institute |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
AAMA 1503.1 |
1988 |
Voluntary Test Method for Thermal Transmittance and Condensation Resistance of Windows, Doors and Glazed Wall Sections
|
American Architectural Manufacturers Association |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
CRI Publication |
1984 |
How to Specify Commercial Carpet Installation
|
Carpet and Rug Institute |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACI 318 |
1992 |
Building Code Requirements for Reinforced Concrete, plus Commentary on Building Code Requirements for Reinforced Concrete
|
American Concrete Institute |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
WQA S-100 |
1985 |
Household Commercial and Portable Exchange Water Softeners
|
Water Quality Association |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ACI 506 |
1990 |
Recommended Practice for Shotcreting
|
American Concrete Institute |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
HUD Handbook 4930.2 |
1989 |
HUD Intermediate Minimum Property Standards Supplement, Solar Heating and Domestic Hot Water Systems
|
U.S. Department of Housing and Urban Development |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
FedSpec L-F-1641 |
1982 |
Floor Covering, Translucent or Transparent Vinyl Surface with Backing, Amendment 2
|
Federal Specifications Standards and Test Methods |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
FedSpec HH-I-521F |
1980 |
Insulation Blankets, Thermal (Mineral Fiber) for Ambient Temperatures
|
Federal Specifications Standards and Test Methods |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM C209 |
1984 |
Standard Methods of Testing Insulating Board (Cellulosic Fiber), Structural and Decorative
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
FedSpec SS-T-312B |
1979 |
Tile, Floor: Asphalt, Rubber, Vinyl-Composition
|
Federal Specifications Standards and Test Methods |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ANSI A108.1A |
1992 |
Specifications for Installation of Ceramic Tile in the Wet Set Method with Portland Cement Mortar
|
American National Standards Institute |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM C549 |
1981 |
Perlite Loose Fill Insulation
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM C640 |
1983 |
Standard Specification for Insulation Board, Thermal (Cork)
|
ASTM International |
Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
ASTM C926 |
1990 |
Standard Specification for Application of Portland Cement-Based Plaster
|
ASTM International |