| Occupational Safety and Health Administration |
|
29 CFR 1910.105 |
CGA G-8.1 |
1964 |
Standard for Installation of Nitrous Oxide Systems at Consumer Sites
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.104(b)(6)(iii) |
CGA S-1.3 |
1959 |
Safety Release Device Standard--Compressed Gas Storage Containers
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.104(b)(6)(iii) |
ASME B&PV Code |
1968 |
Boiler and Pressure Vessel Code, Section VIII, Unfired Pressure Vessels
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.104(b)(5)(iii) |
ASME B&PV Code |
1968 |
Boiler and Pressure Vessel Code, Section VIII, Paragraph UG-84
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.104(b)(5)(ii) |
ANSI B31.1 |
1967 |
Code for Pressure Piping
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.104(b)(5)(ii) |
ANSI Addenda B31.10a |
1969 |
Addenda to Code for Pressure Piping
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.104(b)(4)(iii)(A) |
ASME B&PV Code |
1968 |
Boiler and Pressure Vessel Code, Section VIII, Unfired Pressure Vessels
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.104(b)(4)(ii) |
ASME B&PV Code |
1968 |
Boiler and Pressure Vessel Code, Section VIII, Paragraph UG-84
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.104(a)(4)(ii) |
ASME B&PV Code |
1968 |
Boiler and Pressure Vessel Code, Section VII—Unfired Pressure Vessels
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.103(c)(1)(v)(D) |
ASTM D1692 |
1968 |
Test for Flammability of Plastic Sheeting and Cellular Plastics
|
ASTM International |
| Occupational Safety and Health Administration |
|
29 CFR 1910.103(c)(1)(v)(B) |
ANSI B31.1 |
1967 |
Code for Pressure Piping
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.103(c)(1)(v)(B) |
ANSI B31.3 |
1966 |
Chemical Plant and Petroleum Refinery Piping
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.103(c)(1)(v)(B) |
ANSI Addenda B31.1 |
1969 |
Addendum to Code for Pressure Piping
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.103(c)(1)(v)(B) |
ANSI B31.5 |
1966 |
Refrigeration Piping
|
American National Standards Institute |
| National Highway Traffic Safety Administration |
|
29 CFR 1910.103(c)(1)(v)(B) |
ANSI B31.5a |
1968 |
Addenda to Refrigeration Piping
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.103(c)(1)(ix)(B)(1) |
NFPA 496 |
1967 |
Standard for Purged and Pressurized Enclosures for Electrical Equipment in Hazardous Locations
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.103(c)(1)(iv)(A)(2) |
CGA S-1.2 |
1963 |
Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.103(c)(1)(iv)(A)(2) |
CGA S-1.1 |
1963 |
Safety Release Device Standard--Cylinders for Compressed Gases
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.103(c)(1)(iv)(A)(1) |
CGA S-1.3 |
1959 |
Safety Release Device Standard--Compressed Gas Storage Containers
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.103(c)(1)(i)(A) |
ASME B&PV Code |
1968 |
Boiler and Pressure Vessel Code, Section VIII
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.103(c)(1)(i)(A) |
API 620 |
1970 |
Design and Construction of Large Welded Low Pressure Storage Tanks
|
American Petroleum Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.103(b)(1)(iii)(B) |
ANSI Addenda B31.1 |
1969 |
Addenda to Code for Pressure Piping
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.103(b)(1)(iii)(B) |
ANSI B31.1 |
1967 |
Code for Pressure Piping
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.103(b)(1)(ii)(A) |
ASME B&PV Code |
1968 |
Boiler and Pressure Vessel Code, Section VIII
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.103(b)(1)(i)(C) |
29 CFR 1910.253(b)(1)(ii) |
2013 |
Cylinders and Containers, Approval and Marking
|
Occupational Safety and Health Administration, U.S. Department of Labor |
| Occupational Safety and Health Administration |
|
29 CFR 1910.103(b)(1)(i)(A)(1) |
ASME B&PV Code |
1968 |
Boiler and Pressure Vessel Code, Section VIII
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.103(b) |
ANSI B31.1 Addendum |
1969 |
Code for Pressure Piping Addendum
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910.102(c)(2) |
NFPA 51A |
2001 |
Standard for Acetylene Cylinder Charging Plants
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.102(c)(1) |
NFPA 51A |
2006 |
Standard for Acetylene Cylinder Charging Plants
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.102(b)(4) |
CGA G-1.2 |
2006 |
Acetylene Piping
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.102(b)(2) |
NFPA 51A |
2001 |
Standard for Acetylene Cylinder Charging Plants
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.102(b)(1) |
NFPA 51A |
2006 |
Standard for Acetylene Cylinder Charging Plants
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.102(a) |
CGA G-1 |
2009 |
Acetylene
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.101(c) |
CGA S-1.2 |
1963 |
Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.101(c) |
CGA S-1.1 |
1963 |
Safety Release Device Standard--Cylinders for Compressed Gases
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.101(c) |
CGA S-1.1 Addendum |
1965 |
Safety Release Device Standard--Cylinders for Compressed Gases Addendum
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.101(b) |
CGA P-1 |
1965 |
Safe Handling of Compressed Gases
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.101(a) |
CGA C-6 |
1968 |
Standards for Visual Inspection of Compressed Gas Cylinders
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.101(a) |
CGA C-8 |
1962 |
Standard for Requalification of DOT-3HT Cylinders
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910.1001(f)(1)(iv) |
ANSI Z9.2 |
1979 |
Fundamentals Governing the Design and Operation of Local Exhaust Systems
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart T Appendix C (8)(b)(i) |
CGA G-4.3 |
2000 |
Commodity Specification for Oxygen
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart T Appendix C (6)(c) |
CGA G-4.3 |
2000 |
Commodity Specification for Oxygen
|
Compressed Gas Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart T Appendix C (5)(a) |
DSAT No-Decompression Tables |
1994 |
Development and Validation of No-Stop Decompression Procedures for Recreational Diving: The DSAT Recreational Dive Planner
|
Hamilton Research Ltd. |
| Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart T Appendix C (4)(a)(i) |
DSAT Oxygen Exposure Table |
1995 |
Enriched Air Operations and Resource Guide
|
Professional Association of Diving Instructors |
| Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart T Appendix C (4)(a)(i) |
NOAA Diving Manual |
2001 |
National Oceanic and Atmospheric Administration Diving Manual
|
U.S. Department of Commerce, National Oceanic and Atmospheric Administration |
| Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart S Appendix A |
NMAB 353-3 |
1980 |
Classification of Combustible Dust in Accordance with the National Electrical Code
|
National Academy Press |
| Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart S Appendix A |
NFPA 40 |
2001 |
Storage and Handling of Cellulose Nitrate Film
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart S Appendix A |
NFPA 88A |
2002 |
Parking Structures
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart S Appendix A |
NFPA 58 |
2004 |
Liquefied Petroleum Gas Code
|
National Fire Protection Association |
| Occupational Safety and Health Administration |
|
29 CFR 1910 Subpart S Appendix A |
ANSI/ASME B30.7 |
2001 |
Base Mounted Drum Hoists
|
American Society of Mechanical Engineers |