This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation Sort descending | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 242 | 1981 | Standard Specification for High-Strength Low-Alloy Structural Steel | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM D 1838 | 1964 | Copper Strip Corrosion by Liquefied Petroleum (LP) Gases | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section IX | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ISO 535 | 1991 | Paper and Board--Determination of Water Absorptiveness--Cobb Method | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI Pamphlet 57 | 2003 | Emergency Shut-Off Systems for Bulk Transfer of Chlorine | Chlorine Institute, Inc. | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM E 23 | 1998 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM B 162 | 1993 | Standard Specification for Nickel Plate, Sheet, and Strip | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | DOE SP–9 | 1968 | Fire Resistant Phenolic Foam, Revision 1 and Supplement | U.S. Department of Energy | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA C-3 | 1994 | Standards for Welding on Thin-Walled Steel Cylinders | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 4126-1 | 1991 | Safety Valves | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 333 | 1967 | Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM D 1922 | 2000 | Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section V | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | TTMA RP No. 61 | 1998 | Performance of Manhole and/or Fill Opening Assemblies | Truck Trailer Manufacturers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI Pamphlet 166 | 2002 | Section 3, Angle Valve Guidelines for Chlorine Bulk Transportation | Chlorine Institute, Inc. | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM A 302/A 302M | 1993 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum Nickel | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | IME Publication 22 | 1993 | Recommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials | Institute of Makers of Explosives | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11118 | 1999 | Gas cylinders--Non-refillable metallic gas cylinders--Specification and test methods | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11623 | 2002 | Transportable gas cylinders--Periodic inspection and testing of composite gas cylinders | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 441 | 1981 | High-Strength Low-Alloy Structural Manganese Vanadium Steel | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM A 285 | 1978 | Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM D 4206 | 1996 | Standard Test Method for Sustained Burning of Liquid Measures Using the Small Scale Open-Cup Apparatus | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | TTMA RP No. 81 | 1997 | Performance of Spring Loaded Pressure Relief Valves | Truck Trailer Manufacturers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI Drawing No. 104-8 | 1993 | Standard Chlorine Angle Valve Assembly | Chlorine Institute, Inc. | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM A 516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ICAO Publication | 2008 | Technical Instructions for the Safe Transport of Dangerous Goods by Air | International Civil Aviation Organization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 6406 | 2005 | Gas Cylinders--Seamless Steel Gas Cylinders--Periodic Inspection and Testing | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | IMDG Code | 2006 | International Maritime Dangerous Goods Code | International Maritime Organization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 10297 | 1999 | Gas cylinders--Refillable gas cylinder valves--Specification and type testing | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 514 | 1981 | High-Yield Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM D 4359 | 1990 | Standard Test Method for Determining Whether a Material is a Liquid or a Solid | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM B 580 | 2000 | Standard Specification for Anodized Oxide Coatings on Aluminum | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ISO 2592 | 1973 | Petroleum Products--Determination of Flash and Fire Points--Cleveland Open Cup Method | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI Drawing No. 101-7 | 1993 | Excess Flow Valve with Removable Seat | Chlorine Institute, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 6892 | 1984 | Metallic Materials Tensile Testing | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11119-1 | 2002 | Gas cylinders--Gas cylinders of composite construction--Specification and test methods--Part 1: Hoop-wrapped composite gas cylinders | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | Drawing No. 137-5 | 1996 | Standard for Housing and Manway Covers for Steel Cargo Tanks | Chlorine Institute, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | NB-23 | 1992 | National Board Inspection Code | National Board of Boiler and Pressure Vessel Inspectors | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 572 | 1982 | High-Strength Low-Alloy Columbium-Vanadium Steels of Structural Quality | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM E 8 | 1999 | Standard Test Methods for Tension Testing of Metallic Materials | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | DOE KSS-471 | 1986 | Proposal for Modifications to U.S. Department of Transportation Specification 21PF-1 Fire and Shock Resistant Phenolic Foam-Insulated Metal Overpack | U.S. Department of Energy | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA S-1.1 | 2005 | Pressure Relief Device Standards | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI Drawing No. 106-6 | 1993 | Excess Flow Valve with Removable Baskets | Chlorine Institute, Inc. | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM D 1238 | 1990 | Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM B 557 | 1984 | Standard Specification for Tension Testing Wrought and Cast Aluminum and Magnesium-Alloy Products | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | TDG Regulations | 2005 | Transportation of Dangerous Goods Regulations | Canadian Department of Transportation, Transport Canada | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 588 | 1981 | High-Strength Low-Alloy Structural Steel with 50 ksi Minimum Yield Point to 4 inches Thick | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM E 112 | 1996 | Standard Test Method for Determining Average Grain Size | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA C-12 | 1994 | Qualification Procedure for Acetylene Cylinder Design | Compressed Gas Association |