This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (2-(2,4-Dichlorophenoxy) propionic acid) | EPA Method 555 | 1992 | Chlorinated Acids by HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Mine Safety and Health Administration | 30 CFR 57 Subpart C Appendix I | NFPA 12A | 2009 | Halon 1301 Fire Extinguishing Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 233.70(a)(5) | MIOD regulations | 1969 | The Michigan Administrative Procedures Act of 1969, MCL 24-201 et seq. | State of Michigan | |
Coast Guard | 46 CFR 114.600(b) | ABYC A-7 | 1970 | Recommended Practices and Standards Covering Boat Heating Systems | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 63.1282(d)(3)(iii) | ASTM D 6420 | 2004 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.34(c)(3) | Drawing No. 78051-64 | 1987 | Title not specified | General Motors Corporation | |
Research and Special Programs Administration | 49 CFR 193.2321 | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 178.3610(a) | FDA Publication | 1977 | Determination of Unsaturation of Resin | Food and Drug Administration, U.S. Department of Health and Human Services | |
Food and Drug Administration | 21 CFR 176.170(d)(3) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Food and Drug Administration | 21 CFR 178.3610(a) | FDA Publication | 1977 | Determination of Unsaturation of Resin | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 56.30-30(b) | ASME B&PV Code | 1989 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Labor Department | 41 CFR 50-204.65 | 49 CFR 172 | 2014 | Hazardous Materials Table, Special Provisions, Hazardous Materials Communications, Emergency Response Information, and Training Requirements | U.S. Department of Transportation | |
Research and Special Programs Administration | 49 CFR 173.120(a)(4) | ISO 2592 | 1973 | Petroleum Products--Determination of Flash and Fire Points--Cleveland Open Cup Method | International Organization for Standardization | |
Coast Guard | 21 CFR 172.810 | Food Chemicals Codex | 1981 | Dioctyl Sodium Sulfosuccinate | National Academy Press | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-394a | 1974 | Minimum Performance Criteria for Rollover Protective Structures for Wheeled Front-End Loaders and Wheeled Dozers | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 111, 7.3 | ASTM D 1193 | 1977 | Standard Specification for Reagent Water | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(7)(vi) | ASTM A 47 | 1968 | Standard Specification for Malleable Iron Castings | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (111) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.131(d)(3) | APHA Method 5310 C | 2014 | Organic carbon TOC, High-Temperature Combustion Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63.14(g)(86) | ASTM D 7430 | 2011 | Standard Practice for Mechanical Sampling of Coal | ASTM International | |
Minerals Management Service | 30 CFR 250.1904(c) | COS Safety Publication COS-2-01 | 2012 | Qualification and Competence Requirements for Audit Teams and Auditors Performing Third-party SEMS Audits of Deepwater Operations, First Edition | Center for Offshore Safety | |
Coast Guard | 16 CFR 1203.53(b) | Snell B-90S | 1990 | Standard for Protective Headgear for Use in Bicycling with Supplement | Snell Memorial Foundation | |
Environmental Protection Agency | 40 CFR 52.741(x)(1)(i) | 35 I.A.C. 215, Subpart Z | 1989 | Administrative Code | State of Illinois | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (71) | USGS I-3850-78 | 1979 | Tin, AA direct aspiration | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 260.11(c)(3)(xxv) | EPA Method 9060A | 2004 | Total Organic Carbon (and in Basic Manual Update IIIB) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | APHA Standard Methods, 18th Edition | 1992 | Standard Methods for the Examination of Water and Wastewater, 18th Edition | American Public Health Association | |
Federal Motor Carrier Safety Administration | 49 CFR 393.93(b)(2) | FMVSS 208 | 1998 | Occupant Crash Protection | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 60.41da Bituminous coal | ASTM D 388 | 2004 | Standard Classification of Coals by Rank | ASTM International | |
Coast Guard | 46 CFR 56.30-5(c)(1) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63.1512(e)(4)(i) | ACGIH Guidelines | 1997 | ACGIH Guidelines | American Conference of Governmental Industrial Hygienists | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (52) | AOAC Method 973.53 | 1973 | Potassium in water, Atomic absorption spectrophotometric method | AOAC International | |
Rural Utilities Service | 7 CFR 1755.870(b)(1) | ASTM B 33 | 1991 | Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(8)(xiii) | EPA Method 1680 | 2010 | Fecal Coliforms in Sewage Sludge (Biosolids) by Multiple-Tube Fermentation using Lauryl Tryptose Broth (LTB) and EC Medium | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.101(a) | Drawing No. 78051-372 | 1978 | Vinyl Skin Formulation Hybrid III | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 1051.501(d)(2)(i) | ASTM D 471 | 1998 | Standard Test Method for Rubber Property--Effect of Liquids | ASTM International | |
Food and Drug Administration | 21 CFR 172.210(b)(2) | ASTM D 566 | 1982 | Standard Test Method for Dropping Point of Lubricating Grease | ASTM International | |
Coast Guard | 46 CFR 59.10-5(j) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.151-21(w) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1065.710 Table 1 | ASTM D 7039 | 2013 | Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IB (3) | APHA Method 3111 D | 1999 | Metals by Flame Atomic Absorption, Nitrous Oxide | American Public Health Association | |
Coast Guard | 46 CFR 34.01-15(c)(1) | NFPA 13 | 1996 | Standard for the Installation of Sprinkler Systems | National Fire Protection Association | |
Energy Department | 10 CFR 434.403.1 Table 403.1a | ARI 340/360 | 1993 | Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment (RS-16) | Air Conditioning and Refrigeration Institute | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(xxxiv) | ASTM D 2972 | 2008 | Arsenic by Gaseous Hydride Atomic Absorption | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(j) Table 3, B | ISO 10634:1995(E) | 1995 | Water Quality—Guidance for the Preparation and Treatment of Poorly Water-Soluble Organic Compounds for the Subsequent Evaluation of Their Biodegradability in an Aqueous Medium. First Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 56.01-2(k)(3) | MSS SP-25 | 1998 | Standard Marking System for Valves, Fittings, Flanges and Unions | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Environmental Protection Agency | 40 CFR 265.198(b) | NFPA 30 | 1977 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Fensulfothion) | EPA Method 1657 | 1993 | The Determination of Organo-Phosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.1629(b)(1) | API 510 | 2006 | Pressure Vessel Inspection Code | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 272.1751(c)(1)(i) | NDHWMP | 2006 | EPA Approved North Dakota Statutory and Regulatory Requirements Applicable to the Hazardous Waste Management Program | State of North Dakota | |
Coast Guard | 46 CFR 125.180(b) | UL 1573 | 1995 | Stage and Studio Lighting Units | Underwriters Laboratories, Inc. |