This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5335-3 | 1971 | Airport Design Standards--Airports Served by Air Carriers--Bridges and Tunnels on Airports | Federal Aviation Administration, U.S. Department of Transportation | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-39A | 1971 | Runway and Taxiway Retroreflective Markers | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 33 CFR 67.30-5(a) | MIL-C-25050 | 1971 | Color, Aeronautical Lights and Lighting Equipment | U.S. Department of Defense | |
Food and Drug Administration | 16 CFR 1402.4(a)(1)(i)(E)(1) | ANSI Z53.1 | 1971 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.301 S7.1.1 | ASTM D 484 | 1971 | Standard Specifications for Hydrocarbon Dry Cleaning Solvent | ASTM International | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-995a | 1971 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(21) | ANSI J6.6 | 1971 | Rubber Insulating Gloves | American National Standards Institute | |
Coast Guard | 46 CFR 160.023-4(b)(1) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(D) | EPA Method 160.4 | 1971 | Residue, Volatile (Gravimetric, Ignition at 550 degrees C) | U.S. Environmental Protection Agency | |
Federal Railroad Administration | 49 CFR 229.51(a)(2) | ASME B&PV Code | 1971 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1917.42(h)(1) | ANSI B30.9 | 1971 | Standard for Slings | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.106(a)(14)(ii) | ASTM D 93 | 1971 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-995b | 1971 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(22) | ANSI J6.7 | 1971 | Rubber Matting for Use Around Electric Apparatus | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 101, 17.0(9) | ASTM D 2928 | 1971 | Standard Method for Sampling Stacks for Particulate Matter | ASTM International | |
Coast Guard | 46 CFR 160.023-5(a) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Food and Drug Administration | 16 CFR 1505.6(e)(3)(iv) | ANSI C101.1 | 1971 | Standard for Leakage Current for Appliances | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(2) | SAE J-211a | 1971 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5370-7 | 1971 | Airport Construction Controls to Prevent Air Water Pollution | Federal Aviation Administration, U.S. Department of Transportation | |
Consumer Product Safety Commission | 16 CFR 1505.5 Footnote 2 | NFPA 70 | 1971 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 160.023-3(a) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Mine Safety and Health Administration | 30 CFR 77.403(a) | SAE J-231 | 1971 | Minimum Performance Criteria for Falling Object Protective Structures (FOPS) | Society of Automotive Engineers | |
Nuclear Regulatory Commission | 10 CFR 73.26(l)(1) | ANSI MH5.1 | 1971 | Basic Requirements for Cargo Containers | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.1000(f)(3) | DOI/BOR Publication | 1971 | Safety and Health Regulations for Construction, Part II | Bureau of Reclamation, U.S. Department of Interior | |
Rural Utilities Service | 7 CFR 1728.97(a)(5) | RUS Bulletin 50–23 (DT–18) | 1971 | RUS Specification for 60-inch Wood Crossarm Braces | Rural Utilities Service, U.S. Department of Agriculture | |
Federal Trade Commission | 16 CFR 460.5(a)(1) | FedSpec HH-I-530A | 1971 | Insulation, Board, Thermal (Urethane) | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Coast Guard | 46 CFR 153.4(b) | ANSI B16.31 | 1971 | Non-Ferrous Pipe Flanges | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.110(e)(11) | NFPA 37 | 1970 | Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.303(b)(1) | ANSI B7.1 | 1970 | Safety Code for the Use, Care and Protection of Abrasive Wheels | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 171.8 "Viscous liquid" | ASTM D 1200 | 1970 | Viscosity by Ford Viscosity Cup | ASTM International | |
Environmental Protection Agency | 40 CFR 60.234(b)(3)(ii) | AOAC Method 9 | 1970 | Official Methods of Analysis, 11th Edition | AOAC International | |
Rural Utilities Service | 7 CFR 1755.97(b)(11) | RUS Bulletin 345-183, Form 397d | 1970 | Design Specifications for Point-to- point Microwave Radio Systems | Rural Utilities Service, U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 265.314(e)(2)(i) | ASTM G 21 | 1970 | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.66 Appendix D (d)(6)(i) | ANSI A120.1 | 1970 | Safety Code for Powered Platforms for Exterior Building Maintenance | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(9) | ANSI A17.1d | 1970 | Elevators, Dumbwaiters, Escalators, and Moving Walks Supplement | American National Standards Institute | |
Coast Guard | 46 CFR 160.010-1(d)(1) | MIL-P-19644C | 1970 | Plastic Foam, Molded Polystyrene (Expanded Bead Type) | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(20)(iv)(C) | NFPA 37 | 1970 | Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(8) | NFPA 37 | 1970 | Standard for the Installation and use of Stationary Combustion Engines and Gas Turbines | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(1) | SAE Publication | 1970 | SAE Handbook | Society of Automotive Engineers | |
Food and Drug Administration | 21 CFR 173.160(b)(2) | FDA Publication | 1970 | Yeasts—A Toxonomic Study by Jacomina Lodder | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 169.115(c)(1) | ABYC A-3 | 1970 | Recommended Practices and Standards Covering Galley Stoves | American Boat and Yacht Council | |
Occupational Safety and Health Administration | 29 CFR 1910.66 Appendix D (d)(6)(ii) | ANSI A120.1 | 1970 | Safety Code for Powered Platforms for Exterior Building Maintenance | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(8)(ii) Table H-24 Footnote 1 | ANSI H23.1 | 1970 | Standard Specification for Seamless Copper Water Tube | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(a)(4)(ii) | NFPA 101 | 1970 | Life Safety Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 85, Subpart V, Appendix I, Section (H)(1)(a) | SAE J-549 | 1970 | Preignition Rating of Spark Plugs | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(20)(iv)(D) | NFPA 96 | 1970 | Installation of Equipment for the Removal of Smoke and Grease Laden Vapors from Commercial Cooking Equipment | National Fire Protection Association | |
Coast Guard | 46 CFR 121.200 | ABYC A-7 | 1970 | Recommended Practices and Standards Covering Boat Heating Systems | American Boat and Yacht Council | |
Energy Department | 10 CFR 440 Appendix A | FedSpec TT-S-230C | 1970 | Sealing Compound, Elastomeric Type, Single-Component (for Caulking, Sealing and Glazing in Buildings and Other Structures) | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.010-5(b)(2) | MIL-P-19644C | 1970 | Plastic Foam, Molded Polystyrene (Expanded Bead Type) | U.S. Department of Defense |