This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Research and Special Programs Administration | 49 CFR 178.356-2(e) | AWS B3.0 | 1972 | Standard Qualification Procedure | American Welding Society | |
Mine Safety and Health Administration | 30 CFR 75.322 | ACGIH Publication | 1972 | Threshold Limit Values for Substance in Workroom Air | American Conference of Governmental Industrial Hygienists | |
Environmental Protection Agency | 40 CFR 147.1150 | MIUIC regulations | 1972 | State of Michigan-administered program (Reserved) | State of Michigan | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(i) | SAE J-320b | 1972 | Minimum Performance Criteria for Rollover Protective Structures for Prime Movers | Society of Automotive Engineers | |
Consumer Product Safety Commission | 16 CFR 1616.2(b) | NIST PS 54 | 1972 | Body Measurements for Sizing Girls Apparel (formerly CS 153-48) | National Institute of Standards and Technology, U.S. Department of Commerce | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5325-6A | 1972 | Airport Design Standards--Effect and Treatment of Jet Blast | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.060-1(a)(2) | MIL-W-530F | 1972 | Webbing, Textile, Cotton, General Purpose, Natural and In Colors | U.S. Department of Defense | |
Consumer Product Safety Commission | 16 CFR 1201.7(c)(1) | ANSI Z97.1 | 1972 | Performance Specifications and Methods of Test for Safety Glazing Material Used in Buildings | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ACI 322 | 1972 | Structural Plain Concrete | American Concrete Institute | |
Environmental Protection Agency | 40 CFR 147.1251(a)(3) | MSUIC regulations | 1972 | Mississippi Code Annotated, sections 53-3-1 through 53-3-165, inclusive (1972 and Supp. 1988) | State of Mississippi | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5325-6A | 1972 | Airport Design Standards--Effect and Treatment of Jet Blast | Federal Aviation Administration, U.S. Department of Transportation | |
Energy Department | 10 CFR 430 Subpart B, App. O, 2.3.4 | ANSI Z91.1 | 1972 | Performance Standards for Oil-Powered Central Furnaces | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(12) | ASTM D 2459 | 1972 | Standard Test Method for Gamma Spectrometry of Water | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix B, PS-1, 16.0(5) | NBS Special Publication 300, Vol. 9 | 1972 | Colorimetry Precision Measurement and Calibration | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.1.3 | ASTM D 2013 | 1972 | Standard Method of Preparing Coal Samples for Analysis | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1201.7(c)(2) | ANSI Z97.1 | 1972 | Performance Specifications and Methods of Test for Safety Glazing Material Used in Buildings | American National Standards Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(j)(1) | AWS B3.0 | 1972 | Standard Qualification Procedure | American Welding Society | |
Food and Drug Administration | 21 CFR 170.3(n) | NAS Report | 1972 | A Comprehensive Survey of Industry on the Use of Food Chemicals Generally Recognized as Safe | National Academy of Sciences, National Research Council | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-320a | 1972 | Minimum Performance Criteria for Rollover Protective Structure for Rubber-Tired Self-Propelled Scrapers | Society of Automotive Engineers | |
Consumer Product Safety Commission | 16 CFR 1201.7(d)(1) | ANSI Z97.1 | 1972 | Performance Specifications and Methods of Test for Safety Glazing Material Used in Buildings | American National Standards Institute | |
Coast Guard | 46 CFR 160.060-3(d)(2) | MIL-W-530F | 1972 | Webbing, Textile, Cotton, General Purpose, Natural and In Colors | U.S. Department of Defense | |
Rural Utilities Service | 7 CFR 1755.900(b)(1) | RUS Bulletin 345-3 | 1972 | Acceptance of Standards, Specifications, Equipment Contract Forms, Manual Sections, Drawings, Materials and Equipment for the Telephone Program | Rural Utilities Service, U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 3.4.2 | ASTM D 2459 | 1972 | Standard Test Method for Gamma Spectrometry of Water | ASTM International | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | ASTM D 2459 | 1972 | Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 62a | 1972 | Factory-Applied Laminated Roofing Systems Based on Chlorosulfonated Polyethylene (CPSE) | U.S. Department of Housing and Urban Development | |
Coast Guard | 46 CFR 160.055-3(h)(2) | MIL-W-530F | 1972 | Webbing, Textile, Cotton, General Purpose, Natural and In Colors | U.S. Department of Defense | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec L-S-125B | 1972 | Screening, Insect, Non-Metallic | Federal Specifications Standards and Test Methods | |
Housing and Urban Development Department | 24 CFR 200.942(a)(1)(v) | ASTM D 1335 | 1972 | Standard Test Method for Tuft Bind of Pile Floor Coverings | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1201.7(d)(2) | ANSI Z97.1 | 1972 | Performance Specifications and Methods of Test for Safety Glazing Material Used in Buildings | American National Standards Institute | |
Consumer Product Safety Commission | 16 CFR 1505.5 Footnote 2 | NFPA 70 | 1971 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 62.15265(a)(4) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, Part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 440 Appendix A | FedSpec TT-P-791B | 1971 | Putty | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(19) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-995a | 1971 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
Consumer Product Safety Commission | 16 CFR 1402.4(a)(1)(i)(E)(1) | ANSI Z53.1 | 1971 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.268(i)(1) | ANSI Z89.2 | 1971 | Safety Requirements for Industrial Protective Helmets for Electrical Workers, Class B | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-10C | 1971 | Specification for L-828 Constant Current Regulators | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 60.17(f)(1) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60.1320(a)(4) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (8) | EPA Method 160.2 | 1971 | Residue, Non-Filterable (Gravimetric, Dried at 103-105 oC) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60, Appendix A-5, Method 13A, Section 7.1.1.2 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (11) | EPA Method 289.1 | 1971 | Zinc (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | EPA Method 220.1 | 1971 | Copper (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(20) | ANSI J6.5 | 1971 | Rubber Insulating Sleeves | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-995b | 1971 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
Coast Guard | 46 CFR 169.115(c)(4) | FedSpec ZZ-H-451F | 1971 | Hose, Fire, Woven-Jacketed Rubber or Cambric-Lined, with Couplings | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1910.268(n)(11)(v) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.1810(a)(4) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.268(n)(11)(iv) | ANSI J6.6 | 1971 | Rubber Insulating Gloves | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-17A | 1971 | Standby Power for Non-FAA Airport Lighting System | Federal Aviation Administration, U.S. Department of Transportation |