This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Endrin) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60 Subpart IIII, Table 7(1)(b)(iv) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.111(a)(8) | Drawing No. 96-SIDH3-006 | 1997 | Upper and Middle Shoulder Foam | Reprographic Technologies | |
Rural Utilities Service | 7 CFR 1755.522(o)(3)(i) | Bellcore SR-TSV-002275 | 1990 | BOC Notes on the LEC Networks-1990, Issue 1 | Bell Communications Research | |
Housing and Urban Development Department | 24 CFR 200.949(a)(2) | ASTM F 476 | 1991 | Standard Test Method for Security of Swinging Door Assemblies | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (16) | EPA Method 611 | 1982 | Haloethers GC/ELCD | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.102(c)(1) | NFPA 51A | 2006 | Standard for Acetylene Cylinder Charging Plants | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 6.2 | ASTM D 2369 | 1981 | Standard Test Method for Volatile Content of Coatings | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(I)(5)(iii) | APHA Method 4500-Cl F | 1995 | Chlorine, DPD Ferrous Titrimetric | American Public Health Association | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASTM A 74 | 1992 | Cast Iron Soil Pipe and Fittings | ASTM International | |
Mine Safety and Health Administration | 30 CFR 56.14130(j) | SAE J-1040 | 1986 | Performance Criteria for Rollover Protective Structures (ROPS) for Construction, Earthmoving, Forestry and Mining Machines | Society of Automotive Engineers | |
Coast Guard | 46 CFR 161.006-4(h) | ASTM B 456 | 1995 | Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/ASME B30.5 | 2004 | Mobile And Locomotive Cranes | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 108.649(g) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-saving Appliances and Arrangements | International Maritime Organization | |
Energy Department | 10 CFR 431.12, General purpose motor (1) | NEMA MG-1 | 1993 | Motors and Generators | National Electrical Manufacturers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 10297 | 1999 | Gas cylinders--Refillable gas cylinder valves--Specification and type testing | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (2) Antimony | APHA Method 3113 B | 1999 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 799.9430(h)(11) | EPA Report 20T-004 | 2004 | The Atlas Of Dermal Lesions | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(13) | SAE J-395 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Crawler Tractors and Crawler-Type Loaders | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(4) | ANSI A11.1 | 1965 | Practice for Industrial Lighting | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200.926(d)(1)(i)(C)(1) | CABO 1 & 2 Family Code | 1992 | One and Two Family Dwelling Code with Errata Package and 1993 Amendments | Council of American Building Officials | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(c)(3)(i) | ISO 2039-2:1987(E) | 1987 | Plastics—Determination of hardness—Part 2: Rockwell hardness, Second Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (30) | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 430, Appendix A, Method 1653 (18.1) | NCASI Method CP-86.01 | 1986 | Chlorinated Phenolics in Water by In Situ Acetylation/GC/MS Determination | National Council of the Paper Industry for Air and Stream Improvement, Inc. | |
Environmental Protection Agency | 40 CFR 80.47(m)(3) | ASTM D 6708 | 2013 | Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material | ASTM International | |
Research and Special Programs Administration | 21 CFR 160.180(a) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 160.077-21(c)(2) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(3) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH (9) | EPA Method 1623 | 2005 | Cryptosporidium and Giardia in Water by Filtration/IMS/FA | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.3161(f)(1) | ASTM D 2697 | 1998 | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings | ASTM International | |
Research and Special Programs Administration | 49 CFR 173.302(b)(3) | FedSpec RR-C-901D | 2003 | Cylinders, Compressed Gas: High Pressure, Steel DOT 3AA, and Aluminum Applications | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.171-3(b) | NIST Publication 440 | 1976 | Color: Universal Language and Dictionary of Names | National Institute of Standards and Technology, U.S. Department of Commerce | |
Food and Drug Administration | 21 CFR 137.200(c)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.3.4 | ASTM D 1826 | 1994 | Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International | |
Environmental Protection Agency | 40 CFR 98.314(f) | ASTM D 5373 | 2008 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal | ASTM International | |
Coast Guard | 46 CFR 58.03-1(g)(2) | ASTM B 96 | 1993 | Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels | ASTM International | |
Interior Department | 43 CFR 11.44(d) | DOI NRDAM/CME | 1999 | CERCLA Type A Natural Resource Damage Assessment Model for Coastal and Marine Environments, Technical Documentation | U.S. Department of the Interior | |
Environmental Protection Agency | 40 CFR 147.1300(a)(1) | MOUIC regulations | 1984 | Vernon's Annotated Missouri Statutes sections 259.010 to 259.240 (Supp. 1984) | State of Missouri | |
Energy Department | 10 CFR 420.2, Definitions, Model Energy Code | CABO Model Energy Code | 1993 | Model Energy Code | Council of American Building Officials | |
Coast Guard | 21 CFR 109.30(d) | FDA Publication | 1983 | Test Procedures for Determination of PCB Permeability of Food Packaging, Inner-Wraps | Food and Drug Administration, U.S. Department of Health and Human Services | |
Energy Department | 10 CFR 430.2, Definitions, Vibration service lamp (1) | IESNA Handbook | 2000 | The IESNA Lighting Handbook | Illuminating Engineering Society of North America | |
National Highway Traffic Safety Administration | 49 CFR 572.90(b)(1) | Drawing No. 126-0000-0015, 0017-0027 | 1992 | Drawing numbers 126-0000 through 126-0015 (sheets 1 through 3), 126-0017 through 126-0027, and a parts list, Parts List for CAMI Newborn Dummy, Construction of the Newborn Infant Dummy | Reprographic Technologies | |
Food and Drug Administration | 21 CFR 172.859(b)(9) | FDA Publication | 2004 | Methyl Ethyl Ketone Test, Methyl Alcohol Test | Food and Drug Administration, U.S. Department of Health and Human Services | |
Public Health Service | 42 CFR 84.193 | ANSI K13.1 | 1973 | Identification of Air-Purifying Respirator Canisters and Cartridges | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(31) | SAE J-903a | 1966 | Passenger Car Windshield Wiper Systems | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (41) | EPA Method 617 | 1993 | Organohalide Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | APHA Method 7500-Ra B | 1998 | Radium 226 - Precipitation | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1) | ASTM D 4057 | 1981 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.101(d) | SAE J-211 | 1988 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.860(m)(4)(i) | ASTM D 4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International |