This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(b)(10)(xvi) | APHA Method 3111 | 1999 | Metals by Flame Atomic Absorption Spectrometry | American Public Health Association | |
Environmental Protection Agency | 40 CFR 763 Appendix A (III)(L)(6) | EPA Method 2A | 2015 | Direct Measurement of Gas Volume through Pipes and Small Ducts, 40 CFR Part 60 Appendix A | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.124(m)(5) | ASME MFC-7M | 1992 | Measurement of Fluid Flow in Pipes Using Vortex Flow Meters | American Society of Mechanical Engineers | |
Federal Highway Administration | 23 CFR 650.211(c) | USEPA 84-B-92-002 | 1993 | Guidance Specifying Management Measures for Sources of Nonpoint Source Pollution in Coastal Waters | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 23 | HCC Method 8034 | 1979 | Periodate Oxidation Method for Manganese | Hach Chemical Company | |
Research and Special Programs Administration | 49 CFR 179.102-4(a)(2) | ASTM A 516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
Environmental Protection Agency | 40 CFR 60.31e Standard Metropolitan Statistical Area | OMB Bulletin No. 93–17 | 1993 | Revised Statistical Definitions for Metropolitan Areas | Executive Office of the President, Office of Management and Budget | |
Food and Drug Administration | 21 CFR 184.1420(b) | Food Chemicals Codex | 1996 | Lipase Enzyme Preparation Derived from Rhizopus Niveus | National Academy Press | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Acifluorfen) | EPA Method 555 | 1992 | Chlorinated Acids by HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 261.22(a)(1) | EPA SW-846 | 2004 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, Method 9040C | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.1282(g)(4)(iii)(B)(3) | ASTM D 3588 | 1998 | Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density (Specific Gravity) of Gaseous Fuels | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.500 S6.2.1 | ASTM E 1136 | 1993 | Standard Specification for Radial Standard Reference Test Tire | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(iv) | ASTM G 21 | 1990 | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi | ASTM International | |
Coast Guard | 46 CFR 134.140(a)(1) | ABS Publication | 1994 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 572.125(a) | Drawing No. 127-8095 | 1994 | Cable | Reprographic Technologies | |
Occupational Safety and Health Administration | 29 CFR 1910.268(g)(2)(i)(A) | ASTM B 117 | 1964 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 78 | 1978 | Polyethylene (PE), Acrylonitrile Butadiene Styrene (ABS), Poly Vinyl Chloride (PVC) and Polybutylene (PB) Plastic Piping for Domestic Cold Water Service | U.S. Department of Housing and Urban Development | |
Rural Utilities Service | 7 CFR 1755.390(j)(1) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 91.509(b) | ASTM E 29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(5) | ASTM A 395 | 1968 | Ductile Iron for Use at Elevated Temperatures | ASTM International | |
Food and Drug Administration | 21 CFR 184.1311(b) | Food Chemicals Codex | 1996 | Ferrous Lactate | National Academy Press | |
Federal Motor Carrier Safety Administration | 49 CFR 393.7(b)(2) | SAE J-583 | 2004 | Front Fog Lamp | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (115) | ASTM D 7065 | 2006 | Standard Test Method for Determination of Nonylphenol, Bisphenol A, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 141.402(c)(2) Table | EPA Method 1604 | 2002 | Total Coliforms and Escherichia coli (E. coli) in Water by Membrane Filtration Using a Simultaneous Detection Technique (MI Medium) on DC | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(k)(5) | MA 310 CMR 70.00 | 2007 | Environmental Results Program Certification | Commonwealth of Massachusetts, Department of Environmental Protection | |
Coast Guard | 40 CFR 1065.705 Table 1 | IP-501 | 2005 | Determination of aluminum, silicon, vanadium, nickel, iron, sodium, calcium, zinc and phosphorus in residual fuel oil by ashing, fusion and inductively coupled plasma emission spectrometry | Energy Institute | |
Coast Guard | 46 CFR 160.176-13(y)(3) | ASTM D 1434 | 1988 | Standard Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.201 S5.1.2 | SAE J-921 | 1965 | Recommended Practice for Instrument Panel Laboratory Impact Test Procedure | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60.116b(e)(3)(ii) | ASTM D 2879 | 1997 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(100) | ASTM D 2584 | 1968 | Standard Test Method for Ignition Loss of Cured Reinforced Resins | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (72) | ASTM D 5673 | 2005 | Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | EPA Method 531.2 | 2001 | Measurement of N-Methylcarbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC With Postcolumn Derivitization, Revision 1.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41da Lignite | ASTM D 388 | 1999 | Standard Classification of Coals by Rank | ASTM International | |
Interior Department | 43 CFR 3174.10(f)(2) | API 21.2 | 1998 | API MPMS Chapter 21—Flow Measurement Using Electronic Metering Systems, Section 2, Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters | American Petroleum Institute | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(v) | SAE J-167 | 2011 | Protective Frame with Overhead Protection | Society of Automotive Engineers | |
Food and Drug Administration | 21 CFR 178.3770(d)(3) | ASTM D 1387 | 1978 | Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.705 Table 1 | ISO 8754 | 2003 | Petroleum products--Determination of sulfur content--Energy-dispersive X-ray fluorescence spectrometry | International Organization for Standardization | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(14)(ii) | EPA-600-4-91-010 | 1994 | Method 200.9--Determination of Trace Elements by Stabilized Temperature Graphite Furnace Atomic Absorption | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 197.340(f)(1) | FedSpec BB-O-925a | 1961 | Oxygen, Technical, Gas and Liquid | Federal Specifications Standards and Test Methods | |
Consumer Product Safety Commission | 16 CFR 1616.2(b) | NIST PS 36 | 1970 | Body Measurements for Sizing Boys Apparel (formerly CS 155-50) | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 7 CFR 1728.201(j)(4) | AWPA A2 | 2008 | Standard Methods for Analysis of Waterborne Preservatives and Fire-Retardant Formulations | American Wood Protection Association | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 108, 7.1.3 | ASTM D 1193 | 1977 | Standard Specification for Reagent Water | ASTM International | |
Environmental Protection Agency | 40 CFR 98.324(e)(6) | ASME MFC-14M | 2003 | Measurement of Fluid Flow Using Small Bore Precision Orifice Meters | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 440 Appendix A | UL 1995 | 1990 | Cooling equipment: Including evaporative coolers, heat pumps and other equipment | Underwriters Laboratories, Inc. | |
Energy Department | 10 CFR 430 Subpart B, App. M, 2.2, a | ARI 210/240 | 2006 | Unitary Air-Conditioning and Air-Source Heat Pump Equipment | Air Conditioning and Refrigeration Institute | |
Coast Guard | 46 CFR 161.006-4(k) | NSSC 42S5 | 2012 | Screws, machine, cap and set, and nuts | Navy Supply Systems Command | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (13) | EPA Method 200.5 | 2003 | Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 4.2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(xlvii) | ASTM D 4190 | 2008 | Plasma Atomic Emission Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(j) Table 3, C3 | ASTM E 729 | 1996 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians | ASTM International | |
Coast Guard | 46 CFR 111.105-27(b) | NFPA 77 | 2000 | Recommend Practice for Static Electricity | National Fire Protection Association |