This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Research and Special Programs Administration | 21 CFR 176.170(a)(5) | ASTM D 1243 | 1979 | Standard Methods of Test for Dilute Solution Viscosity of Vinyl Chloride Polymers | ASTM International | |
Federal Communications Commission | 47 CFR 15.118(c)(2) | EIA-IS-132 | 1994 | Cable Television Channel Identification Plan | Electronic Industries Association | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(ii) | SAE J-394 | 1969 | Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers | Society of Automotive Engineers | |
Food and Drug Administration | 21 CFR 177.1200(c) | ASTM D 127 | 1960 | Standard Method of Test for Melting Point of Petrolatum and Microcrystalline Wax | ASTM International | |
Coast Guard | 46 CFR 56.15-5(c)(2)(ii)(A) | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.132-19(a) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 147.2850 | FSMUIC regulations | 2014 | State-administered program (Reserved) | Trust Territory of the Pacific, Federated States of Micronesia | |
Environmental Protection Agency | 40 CFR 63.5935 Corrosion-resistant industry standard | ASTM D 4161 | 2014 | Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM D 1238 | 1990 | Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 581.6(b)(1) | SAE J-449a | 1963 | Surface Texture Control | Society of Automotive Engineers | |
Energy Department | 10 CFR 440 Appendix A | AHAM RAC-1 | 1982 | Room Air Conditioners | Association of Home Appliance Manufacturers | |
Coast Guard | 46 CFR 30.10-22(a)(Note 1) | ASTM D 323 | 1994 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(d)(2), Table H-31 | ASME B&PV Code | 1950 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 600.311-12(j)(4) | SAE J-1711 | 2010 | Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-In Hybrid Vehicles | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 98.7(k)(1) | APHA Method 2540 G | 2015 | Total, Fixed, and Volatile Solids in Solid and Semisolid Samples | American Public Health Association | |
Health and Human Services Department | 45 CFR 162.1402(a) | ASC X12N 276/277 | 2000 | Health Care Claim Status Request and Response | Washington Publishing Company | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S8.1.13 | FedSpec L-S-300 | 1965 | Sheeting and Tape, Reflective: Nonexposed Lens, Adhesive Backing | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (49) | EPA Method 632 | 1993 | Carbamate and Urea Pesticides by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 142.39(b)(1) | ANSI Z88.2 | 1980 | Respiratory Protection | American National Standards Institute | |
Coast Guard | 46 CFR 111.12-7(c) | ABS Publication | 2001 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.2.2 | ANSI Z26.1 | 1977 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1755.902(r)(15)(iv)(A) | TIA/EIA 455-3A, FOTP-3 | 1989 | Procedure to Measure Temperature Cycling on Optical Fibers, Optical Cable, and Other Passive Fiber Optic Components | Electronic Industries Association and/or Telecommunications Industry Association | |
Coast Guard | 46 CFR 10.109(d) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Occupational Safety and Health Administration | 29 CFR 1926 Subpart L Appendix A (1)(b)(i) | NFPA Publication | 2014 | National Design Specification for Wood Construction | National Forest Products Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (55) | EPA Method 609 | 1982 | Nitroaromatics and Isophrone by GC/ECD/FID | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | NJDEP Publication | 1980 | Determination of Radium 228 in Drinking Water | State of New Jersey, Department of Environmental Protection | |
Environmental Protection Agency | 40 CFR 60.4900(b)(4)(v) | ASTM D 6784 | 2002 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Rural Utilities Service | 7 CFR 1755.860(e)(4) | ASTM D 4872 | 1988 | Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds | ASTM International | |
Coast Guard | 7 CFR 1755.522(v)(4) | FedSpec H28 | 1978 | Screw-Thread Standards for Federal Services including Change Notices 1, 2, and 3 | Federal Specifications Standards and Test Methods | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(3)(ii) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section XI | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (15) Magnesium | APHA Method 3500-Mg B | 1998 | Magnesium, Calculation Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7420 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(12) | API RP 2SM | 2001 | Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring | American Petroleum Institute | |
Coast Guard | 46 CFR 120.340(i) | UL 486A | 1992 | Wire Connections and Soldering Lugs for Use With Copper Conductors | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 111.107-1(c)(1) | IEEE 1202 | 1991 | Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies | Institute of Electrical and Electronics Engineers | |
Environmental Protection Agency | 40 CFR 136.3(b)(8)(vii) | EPA Method 1622 | 2005 | Cryptosporidium in Water by Filtration/IMS/FA | U.S. Environmental Protection Agency | |
Federal Energy Regulatory Commission | 18 CFR 284.12(a)(1)(vii) | NAESB Publication | 2006 | Internet Electronic Transport Related Standards | North American Energy Standards Board | |
Coast Guard | 46 CFR 53.01-3(b) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (45) | EPA Method 252.2 | 1978 | Osmium (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | IEEE C2 | 2012 | National Electrical Safety Code | Institute of Electrical and Electronics Engineers | |
Coast Guard | 40 CFR 60.593a(b)(2) | ASTM E 168 | 1977 | Standard Practices for General Techniques of Infrared Quantitative Analysis | ASTM International | |
Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 0011 | 1996 | Sampling for Selected Aldehyde and Ketone Emissions from Stationary Sources | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.40(b)(1) | FMVSS 105 | 1998 | Hydraulic and Electric Brake Systems | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.151-21(u) | ISO 18813:2006(E) | 2006 | Ships and marine technology—Survival equipment for survival craft and rescue boats, First Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 1048.110(g)(2) | ISO 14230-4 | 2000 | Road vehicles—Diagnostic systems—Keyword Protocol 2000—Part 4: Requirements for emission-related systems | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 632 | 1993 | Carbamate and Urea Pesticides by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | ASTM D 3559C | 2008 | Standard Test Methods for Lead in Water, Differential Pulse Anodic Stripping Voltammetry | ASTM International | |
Environmental Protection Agency | 40 CFR 98.7(d)(7) | ASME MFC-11M | 2006 | Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 49 CFR 195.3(c) E6 | ASTM A 672 | 2001 | Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures | ASTM International | |
Drug Enforcement Administration | 21 CFR 1300.03 FIPS 180-3 | FIPS Publication 180-3 | 2008 | Secure Hash Standard (SHS) | National Institute of Standards and Technology, U.S. Department of Commerce |