This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Research and Special Programs Administration | 10 CFR 440 Appendix A | ASTM C 509 | 1984 | Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IG (Endothall) | EPA Method 548 | 1990 | Endothall by SPE, Methylation, GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (75) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Toluene) | EPA Method 524.2 | 1995 | Volatile Organic Compounds GC/MS Capillary Column | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.45(f)(5)(ii) | ASTM D 1826 | 1977 | Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International | |
Federal Communications Commission | 47 CFR 2.950(c) | ISO/IEC Guide 61 | 1996 | General requirements for assessment and accreditation of certification/registration bodies | International Organization for Standardization | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | AAMA 1503.1 | 1988 | Voluntary Test Method for Thermal Transmittance and Condensation Resistance of Windows, Doors and Glazed Wall Sections | American Architectural Manufacturers Association | |
Minerals Management Service | 30 CFR 250.1900(a) | COS Safety Publication COS-2-04 | 2012 | Requirements for Accreditation of Audit Service Providers Performing SEMS Audits and Certification of Deepwater Operations, First Edition | Center for Offshore Safety | |
Agricultural Marketing Service | 7 CFR 51.2276(a) | USDA Walnut Color Chart | 1997 | Walnut Color Chart: (Shelled Walnuts), (Walnuts in the Shell) | U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 80.46(a)(4) | ASTM D 4468 | 2011 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry | ASTM International | |
Energy Department | 10 CFR 434.701.1 RS-12 | ASTM D 4099 | 1995 | Standard Specification for Poly Vinyl Chloride (PVC) Prime Windows/Sliding Glass Doors (RS-12) | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 572 | 1982 | High-Strength Low-Alloy Columbium-Vanadium Steels of Structural Quality | ASTM International | |
Housing and Urban Development Department | 24 CFR 100.201a(b)(2) | ICC/ANSI A117.1 | 1998 | American National Standard: Accessible and Usable Buildings and Facilities | International Code Council | |
Housing and Urban Development Department | 24 CFR 3280.4(a) | CISPI All Standards | 2013 | All specifications, standards and codes without specific reference | Cast-Iron Soil Pipe Institute | |
Federal Communications Commission | 47 CFR 80.1101(c)(5)(i) | IMO Resolution A.810(19) | 1995 | Performance Standards for Float-free Satellite Emergency Position-Indicating Radio Beacons (EPIRBs) Operating on 406 MHz | International Maritime Organization | |
Coast Guard | 46 CFR 160.060-1(a)(3) | Federal Standard 191 | 1978 | Textile Test Methods | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 60.17(g)(30) | ASTM D 323 | 1982 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Coast Guard | 46 CFR 10.103(b)(1) | STCW Convention | 1995 | STCW--International Convention on Standards of Training, Certification and Watchkeeping for Seafarers | International Maritime Organization | |
Coast Guard | 46 CFR 162.161-2(d)(2) | UL 2166 | 2001 | Standard for Safety for Halocarbon Clean Agent Extinguishing System Units | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (19) | AOAC Method 974.27 | 1988 | Metals (Cd, Cr, Cu, Fe, Pb, Mg, Mn, As, and Zn) in Water - Atomic Absorption Spectrophotometric Method | AOAC International | |
Environmental Protection Agency | 40 CFR 136.3(e) Table II Footnote 23 | EPA Method 1680 | 2010 | Fecal Coliforms in Sewage Sludge (Biosolids) by Multiple-Tube Fermentation using Lauryl Tryptose Broth (LTB) and EC Medium | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 799.5089(h)(2) | ASTM E 1163 | 1998 | Standard Test Method for Estimating Acute Oral Toxicity in Rats | ASTM International | |
Food and Drug Administration | 21 CFR 139.110(a)(5) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.252(c)(1)(v)(B) | ANSI Z49.1 | 1967 | Safety in Welding and Cutting | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 147.350(a)(1) | CTUIC regulations | 1990 | Connecticut General Statutes Annotated, title 22a (Environmental Protection), chapter 439, sections 22a-1 through 22a-27 | State of Connecticut | |
Rural Utilities Service | 7 CFR 1755.522(f)(2)(iii)(B) | Bellcore SR-TSV-002275 | 1990 | BOC Notes on the LEC Networks-1990, Issue 1 | Bell Communications Research | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(2) | NHTSA Publication | 2011 | Parts List and Drawings, Part 572 Subpart T, Hybrid III 10-Year-Old Child Test Dummy (HIII-10C) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Prometryn) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 282.79(d)(1)(i)(B) | NHUSTP | 1993 | New Hampshire Regulatory Requirements Applicable to the Underground Storage Tank Program | State of New Hampshire | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.6.4(b)(3) | ASME MFC-3M | 2004 | Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 430 Subpart B, App. M, 3, 3.3, c | ASHRAE 37 | 2005 | Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (34) | USGS I-3454-85 | 1985 | Manganese, by Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(e) | ASTM E 871 | 2006 | Standard Method of Moisture Analysis of Particulate Wood Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 61.245(e)(3) | ASTM D 2382 | 1988 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International | |
Coast Guard | 33 CFR 157.02(b)(6) | IMO Resolution A.601(15) | 1987 | Provision and Display of Manoeuvring Information on Board Ships, Annex sections 1.1, 2.3, 3.1, and 3.2 with appendices | International Maritime Organization | |
Coast Guard | 46 CFR 160.055-5(c)(1) | Drawing No. 160.055-1B, Sheet 4 | 2012 | Life Preservers, Unicellular Foam, Child, Buoyant Inserts, Model 67 | U.S. Coast Guard | |
National Archives and Records Administration | 36 CFR 1238.5(e)(1) | NAPM IT2.19 | 1994 | American National Standard for Photography--Density Measurements--Part 2: Geometric Conditions for Transmission Density | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/NWWDA I.S. 1 | 1987 | Industry Standard for Wood Flush Doors | National Wood Window and Door Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.927(c)(1)(i) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Housing and Urban Development Department | 24 CFR 3280.406(b) | ASTM E 1333 | 1996 | Standard Test Method for Determining Formaldehyde Levels from Wood Products Under Defined Test Conditions Using a Large Chamber | ASTM International | |
Public Health Service | 42 CFR 37.10(b)(1) | AAPM On-Line Report No. 03 | 2005 | Assessment of Display Performance for Medical Imaging Systems | American Association of Physicists in Medicine | |
National Highway Traffic Safety Administration | 49 CFR 564 Appendix C III Incorporated Figures | SAE J-1383 | 1985 | Type 2D1 Headlamp Mounting Ring/Lamp Body Dimensional Information | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (30) | EPA Method 614 | 1993 | Organophosphorous Pesticides by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Iron) | APHA Method 3120 B | 1995 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1910.107(d)(1) | NFPA 91 | 1961 | Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | National Fire Protection Association | |
Coast Guard | 46 CFR 39.2009(a)(2)(ix) | IEC 60309-2 | 2012 | Plugs, Socket-Outlets and Couplers for Industrial Purposes—Part 2: Dimensional Interchangeability Requirements for Pin and Contact-tube Accessories, Edition 4.2 2012-05 | International Electrotechnical Commission | |
Research and Special Programs Administration | 24 CFR 200.926a(c)(5) | ASCE 7 | 1995 | Minimum Design Loads for Buildings and Other Structures | American Society of Civil Engineers | |
National Highway Traffic Safety Administration | 21 CFR 177.1810(c)(2)(i) | ASTM D 2236 | 1970 | Standard Method of Test for Dynamic Mechanical Properties of Plastics by Means of a Torsional Pendulum | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(19) | ANSI J6.4 | 1971 | Rubber Insulating Blankets | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (28) | APHA Method 6200 C | 1997 | Volatile Aromatic Organic Compounds by GC/PID Purge & Trap | American Public Health Association |