This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 147.7(b)(1) | ABYC H-25 | 1981 | Portable Fuel Systems for Flammable Liquids | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 796.1950(b)(2)(i) | ASTM D 2879 | 1986 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Environmental Protection Agency | 40 CFR 98.164(b)(5)(ix) | ASTM D 4177 | 1995 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2 | ASTM International | |
Coast Guard | 46 CFR 121.240(b) | ABYC A-22 | 1993 | Marine Compressed Natural Gas Systems | American Boat and Yacht Council | |
National Highway Traffic Safety Administration | 49 CFR 572.77(a)(2)(i) | Drawing No. SA-572-S1 | 1996 | Type A accelerometer | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Research and Special Programs Administration | 49 CFR 192.279 | ASME B16.5 | 2004 | Steel Pipe Flanges and Pipe Fittings | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 131.160(c)(2) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 262.83(d)(12) | OECD Publication | 2009 | Annex C (Amber List) of the 2009 Guidance Manual for the Implementation of Council Decision C(2001)107/FINAL, as Amended, on the Control of Transboundary Movements of Wastes Destined for Recovery Operations | Organization for Economic Cooperation and Development | |
Environmental Protection Agency | 40 CFR 63, Subpart HHHHHHH, Table 10 | EPA SW-846-8015C | 2007 | Nonhalogenated Organics by Gas Chromatography, Revision 3 | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.704(c)(2) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Securities and Exchange Commission | 17 CFR 270.17f-4(c)(1) | Uniform Commercial Code | 2002 | 2002 Official Text and Comments, Sections 8–102, 8–103, and 8–501 through 8–511 | National Conference of Commissioners on Uniform State Laws | |
Environmental Protection Agency | 40 CFR 260.11(g)(1) | OECD Publication | 1993 | OECD Amber List of Wastes | Organization for Economic Cooperation and Development | |
Interior Department | 43 CFR 11.33(a) | DOI NRDAM/CME | 1999 | The CERCLA Type A Natural Resource Damage Assessment Model for Coastal and Marine Environments Technical Documentation, Volumes I-VI, dated April 1996, including Revision I dated October 1997, and Revision II dated December 1999 | U.S. Department of the Interior | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (93) | EPA Method 608 | 1982 | Organochlorine Pesticides & PCBs by GC/ECD | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.41(a)(5) | Drawing No. SA 150 M060 | 1994 | Pelvis and Abdomen Assembly | Reprographic Technologies | |
Coast Guard | 21 CFR 131.150(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.249(d) | ASTM B 162 | 1993 | Standard Specification for Nickel Plate, Sheet, and Strip | ASTM International | |
Environmental Protection Agency | 40 CFR 261, Appendix IX, Tables 1 and 2 | EPA Method 1330A | 1992 | Extraction Procedure for Oily Wastes | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.13(b) | FMVSS 108 | 1998 | Lamps, Reflective Devices, and Associated Equipment | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (62) | EPA Method 200.5 | 2003 | Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 4.2 | U.S. Environmental Protection Agency | |
Coast Guard | 21 CFR 145.3(n) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 39.1005(h)(1) | NFPA 70 | 2011 | National Electrical Code | National Fire Protection Association | |
Energy Department | 10 CFR 431.102, R-value | ASTM C 518 | 1991 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | AA Publication | 1982 | Aluminum Standards and Data, Seventh Edition | Aluminum Association | |
Environmental Protection Agency | 40 CFR 141.402(c)(2) Table Note 7 | APHA Method 9222 C | 1998 | Delayed-Incubation Total Coliform Procedure | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63.14(o)(3)(i) | NIOSH Method 2010 | 1994 | Amines, Aliphatic, Issue 2 | National Institute for Occupational Safety and Health | |
Coast Guard | 46 CFR 56.65-1 | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 52.741(x)(1)(i) | 35 I.A.C. 215, Subpart Y | 1989 | Administrative Code | State of Illinois | |
Occupational Safety and Health Administration | 29 CFR 1910.261(l)(3) | ANSI B15.1 | 1958 | Safety Code for Mechanical Power Transmission Apparatus | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (1,2-Dichloropropane) | EPA Method 524.2 | 1995 | Volatile Organic Compounds GC/MS Capillary Column | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.45(f)(4)(vi) | ASTM D 388 | 1995 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 79.56(d)(5)(i) | ASTM D 4814 | 1993 | Standard Specification for Automotive Spark-Ignition Engine Fuel | ASTM International | |
Environmental Protection Agency | 40 CFR 435.13 Note 8 | EPA Method 1644 | 2015 | Method for Conducting a Sediment Toxicity Test with Leptocheirus plumulosus and Non-Aqueous Drilling Fluids or Synthetic-Based Drilling Muds | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.156-7(b)(3)(ii) | ASTM A 314 | 2008 | Standard Specification for Stainless Steel Billets and Bars for Forging | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA Note 20 | EPA Method 1681 | 2006 | Fecal Coliforms in Sewage Sludge (Biosolids) by Multiple-Tube Fermentation using A-1 medium | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(lix) | APHA Method 6410 | 2000 | Extractable Base/Neutrals and Acids | American Public Health Association | |
Housing and Urban Development Department | 24 CFR 200.946(a)(1)(xiv) | EIMA Test Method 105.01 | 1995 | Standard Test Method for Alkali Resistance of Glass Fiber Reinforcing Mesh for Use in Exterior Insulation and Finish Systems (EIFS), Class PB | Exterior Insulation Manufacturers Association | |
Coast Guard | 46 CFR 154.1(b) | ASTM A 20/A 20M | 1997 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IB (30) | ASTM D 1068D | 2003 | Standard Test Methods for Iron in Water, Photometric Bathophenanthroline mg/L | ASTM International | |
Environmental Protection Agency | 40 CFR 300.915(b)(8) | ASTM D 97 | 1987 | Standard Test Method for Pour Point of Petroleum Oils | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(4)(v) | NFPA 1983 | 2001 | Standard on Fire Service Life Safety Rope and System Components | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.130(a)(3) | SAE J-211/1 | 1995 | Instrumentation for Impact Tests—Part 1—Electronic Instrumentation | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Chlorpyrifos) | EPA Method 622 | 1993 | Organophosphorus Pesticides by Liquid/Liquid Extraction and GC/NPD | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.01-2(e)(73) | ASTM F 1120 | 2010 | Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications | ASTM International | |
Food and Drug Administration | 21 CFR 184.1081(b) | Food Chemicals Codex | 1981 | Propionic Acid | National Academy Press | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix A Section 1910.159 (4) | NFPA 13A | 1987 | Maintenance of Automatic Sprinkler Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 799.5089(h)(1)(xi) | ISO 14593:1999(E) | 1999 | Water Quality—Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium—Method by Analysis of Inorganic Carbon in Sealed Vessels (CO2 Headspace Test). First Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 154.24(b) | IMO Publication | 1975 | Code for Existing Ships Carrying Liquefied Gases in Bulk | International Maritime Organization | |
Research and Special Programs Administration | 49 CFR 195.106(e) | ASTM A 106/A 106M | 2004 | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service | ASTM International | |
Minerals Management Service | 30 CFR 250.1202(f)(1)(ii) | API MPMS | 2013 | Chapter 12, Section 2, Part 4 | American Petroleum Institute |