DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 63, Subpart PPPP, Appendix A, Section 2.4 | ASTM E 145 | 2003 | Standard Specification for Gravity-Convection and Forced- Ventilation Ovens | ASTM International | |
Research and Special Programs Administration | 10 CFR 430.2, Definitions, Rated wattage (1)(ii) | ANSI C78.81 | 2005 | Electric Lamps - Double-Capped Fluorescent Lamps - Dimensional and Electrical Characteristics | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 600.311-12(k) | SAE J-1634 | 2012 | Battery Electric Vehicle Energy Consumption and Range Test Procedure | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 98.324(d)(1) | ASTM D 1945 | 2003 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Coast Guard | 46 CFR 58.03-1(g)(4) | ASTM B 127 | 1993 | Standard Specification for Nickel-Copper Alloy (UNS NO4400) Plate, Sheet, and Strip | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(2)(i), Table I-2 Note | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | AA Publication | 1982 | Aluminum Standards and Data, Seventh Edition | Aluminum Association | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM A 516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
Coast Guard | 46 CFR 28.345(b) | ABYC E-1 | 1972 | Bonding of Direct Current Systems | American Boat and Yacht Council | |
Environmental Protection Agency | 40 CFR 60.17(g)(151) | ASTM D 4177 | 2000 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(j)(4) | ASTM D 93 | 1969 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Public Health Service | 42 CFR 84.1154(b) | ANSI K13.1 | 1973 | Identification of Air-Purifying Respirator Canisters and Cartridges | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(32) | SAE J-921 | 1965 | Instrument Panel Laboratory Impact Test Procedure | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (41) | APHA Method 6630 B | 2000 | Organochlorine Pesticides by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 147.2600(a)(2) | GUUIC regulations | 1974 | Water Pollution Control Act, Government Code of Guam sections 57042 and 57045, P.L. 9-76 (July 29, 1967), as amended by P.L. 9-212 (August 5, 1968), as amended by P. L. 10-31 (March 10, 1969), as amended by P.L. 12-191 (December 30, 1974) | Guam Territory | |
Environmental Protection Agency | 40 CFR 98.64(a) | EPA Publication | 2008 | Protocol for Measurement of Tetrafluoromethane (CF4) and Hexafluoroethane (C2F6) Emissions from Primary Aluminum Production | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 52.741(x)(1)(i) | 35 I.A.C. 215, Subpart Y | 1989 | Administrative Code | State of Illinois | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(3)(v) | ASME OM Code | 1995 | Code for Operation and Maintenance of Nuclear Power Plants, Subsection ISTD, Inservice Testing of Dynamic Restraints (Snubbers) in Light-Water Reactor Power Plants, 1995 Edition through the latest edition and addenda | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.97(b) Note to paragraph (b) | ASTM F 712 | 2011 | Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (44) | APHA Method 6420 B | 2000 | Phenols by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | APHA Method 7500-Ra B | 2001 | Radium 226 - Precipitation | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.4415(a)(1) | ASTM D 4057 | 1995 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.1.1 | ASTM D 2234 | 1998 | Standard Practice for Collection of a Gross Sample of Coal | ASTM International | |
Coast Guard | 46 CFR 28.345(b) | ABYC E-9 | 1981 | Direct Current (DC) Electrical Systems on Boats | American Boat and Yacht Council | |
Rural Utilities Service | 7 CFR 1755.860(c)(3) | ASTM D 1535 | 1989 | Specifying Color by the Munsell System | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(8)(vi) | EPA Method 1604 | 2002 | Total Coliforms and Escherichia coli (E. coli) in Water by Membrane Filtration Using a Simultaneous Detection Technique (MI Medium) on DC | U.S. Environmental Protection Agency | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-21 | 1964 | Specification for L-813 Static Indoor Type Constant Current Regulator Assembly; 4 KW and 7\1/2\ KW; for Remote Operation of Taxiway Lights | Federal Aviation Administration, U.S. Department of Transportation | |
Food and Drug Administration | 21 CFR 131.180(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.110(i)(3)(i) | NFPA 58 | 0 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 91.6(b)(1) Table | ASTM D 1319 | 1993 | Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.76(a) | Drawing No. SA 106C 042 | 0 | Arm Assembly, Left, Revision A | Reprographic Technologies | |
Coast Guard | 40 CFR 136.3(a) Table IB (35) | EPA Method 245.7 | 2005 | Mercury in Water by Cold Vapor Atomic Fluorescence Spectrometry, EPA-821-R-05-001, Revision 2.0 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.021-1(a)(1) | NIST Publication 440 | 1976 | Color: Universal Language and Dictionary of Names | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 59.213(b)(2) | ASTM E 380 | 1993 | Standard Practice for Use of the SI International System of Units | ASTM International | |
Coast Guard | 46 CFR 39.2009(a)(1)(iii)(A) | NEMA Publication WD-6 | 1988 | Wiring Devices, Dimensional Requirements | National Electrical Manufacturers Association | |
Coast Guard | 46 CFR 30.10-22(c)(Note 1) | ASTM D 323 | 1994 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (40) | ASTM D 4327 | 2003 | Inorganic Anions by Ion Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | APHA Method 4500-F B | 1992 | Fluoride Distillation | American Public Health Association | |
Coast Guard | 46 CFR 177.300(c)(2) | ABS Publication | 1978 | Rules for Building and Classing Reinforced Plastic Vessels | American Bureau of Shipping | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-429f | 0 | Mechanical and Quality Requirements for Externally Threaded Fasteners | Society of Automotive Engineers | |
Coast Guard | 46 CFR 12.05-3(b)(1) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 46 CFR 58.60-9 | API RP 14C | 1986 | Analysis, Design, Installation and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
Coast Guard | 46 CFR 160.135-11(c)(2)(i)(B) | ISO 527-1:1993(E) | 1993 | Plastics—Determination of tensile properties, part 1: General Principles, First Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 1043.100 | IMO Publication | 2009 | Revised MARPOL Annex VI, Regulations for the Prevention of Air Pollution from Ships, and NOX Technical Code 2008 | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(D) | EPA Method 614.1 | 1993 | The Determination of Organophosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (2) | EPA Method 200.7 | 1994 | Inductively Coupled Plasma Atomic Emission Spectrometric Method for Trace Element Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(e)(1) | ISO 13837:2008(E) | 2008 | Road Vehicles—Safety glazing materials—Method for the determination of solar transmittance, First edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 147.750(a)(2) | INUIC regulations | 1990 | West's Annotated Indiana Code, title 13, article 8, chapters 1 through 15 (1990 and Cumm. Supp. 1990) | State of Indiana | |
Environmental Protection Agency | 40 CFR 63, Subpart ZZZZZ, Table 1, Footnote 1 | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 49 CFR 195.3(c) E7 | ASTM A 691 | 2002 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperature | ASTM International |