This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 60.4415(a)(1) | ASTM D 4177 | 1995 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(i)(4) | ANSI Z87.1 | 1968 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(36) | NFPA 51A | 2006 | Standard for Acetylene Cylinder Charging Plants | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (62) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (23) Silica | APHA Method 3120 B | 1995 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 2431 | 1984 | Standard Cup Method | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.1.1 | ASTM D 2234 | 1976 | Standard Practice for Collection of a Gross Sample of Coal | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 197 | 1987 | Standard Specification for Cupola Malleable Iron | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(2)(ii) | AOAC Official Methods | 2005 | Official Methods of Analysis | AOAC International | |
Energy Department | 10 CFR 434.701.1 RS-43 | NEMA MG-10 | 1994 | Energy Management Guide for Selection and Use of Polyphase Motors (RS-43) | National Electrical Manufacturers Association | |
Surface Mining Reclamation and Enforcement Office | 30 CFR 870.18(c)(7) | ASTM D 1412 | 1993 | Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30 Degrees Celsius | ASTM International | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(14)(i) | EPA-600-4-91-010 | 1994 | Method 200.8--Determination of Trace Elements in Waters and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 21 CFR 177.1590(c) | ASTM D 968 | 1981 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Falling Abrasive Tester | ASTM International | |
Coast Guard | 46 CFR 28.40(b) | ABYC E-8 | 1985 | Alternating Current (AC) Electrical Systems on Boats | American Boat and Yacht Council | |
Coast Guard | 46 CFR 164.120-5(d)(9) | ISO 2039-2:1987(E) | 1987 | Plastics—Determination of hardness—Part 2: Rockwell hardness, Second Edition | International Organization for Standardization | |
Food and Drug Administration | 21 CFR 172.886(c)(2)(iii) | FDA Publication | 1977 | Method for Determining Residual Level of Poly(alkylacrylate) in Petroleum Wax | Food and Drug Administration, U.S. Department of Health and Human Services | |
Food and Drug Administration | 21 CFR 101.83(c)(2)(ii)(B)(2) | MCH Publication | 2000 | Determination of Stanols and Sterols in Benecol Softgels | McNeil Consumer Healthcare | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(53) | ANSI Z12.12 | 1968 | Standard for the Prevention of Sulphur Fires and Explosions | American National Standards Institute | |
Labor Department | 41 CFR 50-204.65 | CGA C-8 | 1962 | Standard for Requalification of DOT-3HT Cylinders | Compressed Gas Association | |
National Highway Traffic Safety Administration | 49 CFR 572.5(a) | Drawing No. SA 150 M071 | 1970 | Left arm assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 56.01-2(d)(14) | ASME B16.21 | 2005 | Nonmetallic Flat Gaskets for Pipe Flanges | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.077-19(c)(3)(iii) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Energy Department | 10 CFR 440 Appendix A | ANSI Z21.71 | 1981 | Automatic Intermittent Pilot Ignition Systems for Field Installation including Z21.71a-85 and Z21.71b-89 | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA Footote 22 | EPA Method 1603 | 2009 | Escherichia coli (E. coli) in Water by Membrane Filtration Using Modified membrane-Thermotolerant Escherichia coli Agar (Modified mTEC) | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 179.102-17(b)(2) | ASTM A 516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(lx) | APHA Method 6420 | 2000 | Phenols | American Public Health Association | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (1) | ASTM D 5673 | 1996 | Standard Test Method for Elements in Water by Inductively Coupled Plasma--Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 86.1(d)(4) | California Regulatory Requirements | 2007 | Approved on November 9, 2007, Title 13, California Code of Regulations, Section 1968.2, Malfunction and Diagnostic System Requirements for 2004 and Subsequent Model-Year Passenger Cars, Light-Duty Trucks, and Medium-Duty Vehicles and Engines (OBD-II) | California Air Resources Board | |
National Highway Traffic Safety Administration | 49 CFR 572.130(a)(4) | SAE J-211/2 | 1995 | Instrumentation for Impact Tests—Part 2—Photographic Instrumentation | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Diazinon) | EPA Method 1657 | 1993 | The Determination of Organo-Phosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.2000(b)(6) | RIUIC regulations | 1981 | Hazardous Waste Management Facility Operating Permit Rules and Regulations—Landfills, at last amended November 2, 1981 (hereinafter referred to as the Hazardous Waste Regulation) | State of Rhode Island | |
Environmental Protection Agency | 40 CFR 63.10692 Free organic liquids | ASTM D 2216 | 2005 | Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass | ASTM International | |
Environmental Protection Agency | 40 CFR 98.324(d)(1) | ASTM D 1946 | 2006 | Standard Practice for Analysis of Reformed Gas by Gas Chromatography | ASTM International | |
Coast Guard | 46 CFR 58.03-1(g)(6) | ASTM B 209 | 1996 | Standard Specification for Aluminum and Aluminum Alloy Sheet and Plate | ASTM International | |
Housing and Urban Development Department | 24 CFR 3285.312(a)(2)(ii) | AWPA U1 | 2004 | Use Category System; User Specification for Treated Wood | American Wood Preservers Institute | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D 523 | 1989 | Standard Test Method for Specular Gloss | ASTM International | |
Public Health Service | 42 CFR 52b.12(b) | NAS Publication | 1995 | Prudent Practices in the Laboratory: Handling and Disposal of Chemicals | National Academy of Sciences, National Research Council | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(11) | SAE J-578 | 1988 | Color Specification | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60.17(g)(19) | ASTM D 86 | 1996 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Food and Drug Administration | 21 CFR 118.8(a) | FDA Publication | 2008 | Environmental Sampling and Detection of Salmonella in Poultry Houses | Food and Drug Administration, U.S. Department of Health and Human Services | |
Mine Safety and Health Administration | 30 CFR 57.14130(h) | SAE J-1194 | 1983 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 79a | 1982 | Acrylonitrile Butadiene Styrene (ABS) and Poly Vinyl Chloride (PVC) Plastic Drain, Waste and Vent Pipe and Fittings | U.S. Department of Housing and Urban Development | |
Environmental Protection Agency | 40 CFR 141.707(c)(1) | EPA Method 1623 | 2005 | Cryptosporidium and Giardia in Water by Filtration/IMS/FA | U.S. Environmental Protection Agency | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(2)(vii) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section XI, Division 1, Table IWA-1600-1, Referenced Standards and Specifications, 1987 Addenda, 1988 Addenda | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.51(a)(6) | 40 CFR Part 141 | 2014 | National Primary Drinking Water Regulations | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 571.121 S5.2.3.3(b)(1) | SAE J-759 | 1995 | Recommended Practice for Lighting Identification Code | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (8) | 3M Test Method 0222 | 1994 | Organochlorine Pesticides and PCBs in Wastewater Using Empore Disk | 3M Corporation | |
Rural Utilities Service | 7 CFR 1755.390(i)(5)(vi) | ASTM A 505 | 1987 | Standard Specification for General Requirements for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled | ASTM International | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Vinyl chloride) | EPA Method 524.2 | 1995 | Volatile Organic Compounds GC/MS Capillary Column | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(7) | APHA Method 603 | 2015 | Tentative Method of Analysis for Iodine131 Content of the Atmosphere | American Public Health Association |