This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(17)(ii) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII, Unfired Pressure Vessels with Addenda | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 25.45-2(b)(1) | ABYC A-1 | 1978 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
Rural Utilities Service | 7 CFR 1755.397(a)(8)(i) | RUS Bulletin 345-50, PE-60 | 1979 | RUS Specification for Trunk Carrier Systems | Rural Utilities Service, U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 136.3(b)(33)(xx) | USGS Publication | 1975 | Water Temperature--Influential Factors, Field Measurement and Data Presentation, by H.H. Stevens, Jr., J. Ficke, and G.F. Smoot, Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 1, Chapter D1 | U.S. Geological Survey | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(11) | ASTM D 5 | 1965 | Test for Penetration by Bituminous Materials | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.71(r)(2) | ISO 7225 | 2005 | Gas Cylinders--Precautionary Labels | International Organization for Standardization | |
Energy Department | 10 CFR 440 Appendix A | FedSpec TT-P-791B | 1971 | Putty | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | APHA Method 4500-ClO2 E | 2014 | Chlorine Dioxide, Amperometric Method II | American Public Health Association | |
Coast Guard | 40 CFR 60.261(q) High-carbon ferrochrome | ASTM A 101 | 1973 | Standard Specification for Ferrochromium | ASTM International | |
Coast Guard | 46 CFR 38.01-3(b) | ASNT RP SNT-TC-1A | 1988 | Personnel Qualification and Certification for Nondestructive Testing | American Society for Nondestructive Testing | |
Housing and Urban Development Department | 24 CFR 3280.703 | ASME B36.10 | 1979 | Welding and Seamless Wrought Steel Pipe | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 164.120-7(a)(1)(ii) | MIL-R-21607E(SH) | 1990 | Military Specification, Resins, Polyester, Low Pressure Laminating, Fire-Retardant | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (26) | AOAC Method 993.14 | 1998 | Gold-Total, mg/L | AOAC International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (1) Alkalinity | ASTM D 1067 | 2002 | Standard Test Method for Acidity or Alkalinity of Water | ASTM International | |
Environmental Protection Agency | 40 CFR 799.9310(h)(3) | OECD No. 408 | 1981 | Guidelines for Testing of Chemicals, Subchronic Oral Toxicity-Rodent: 90-day Study | Organization for Economic Cooperation and Development | |
Coast Guard | 46 CFR 160.077-19(c)(10) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.177(a)(4) | Drawing No. SA-572-S11 | 1987 | Six axis neck transducer | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH (4) | APHA Method 9222(B+B.5c) | 1997 | Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Environmental Protection Agency | 40 CFR 430, Appendix A, Method 1650 (16.4) | ISO/DIS Method 9562 | 1988 | Water Quality: Determination of Adsorbable Organic Halogens (AOX) | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 80.47(c)(1) | ASTM D 6667 | 2010 | Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence | ASTM International | |
Coast Guard | 7 CFR 1755.703(a)(1) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(18)(iii) | ANSI B31.1a | 1963 | Addenda to Code for Pressure Piping | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63, Subpart RRR, Appendix A | ACGIH Publication | 1998 | Industrial Ventilation Manual: A Manual of Recommended Practice, 23rd Edition, Chapters 3 and 5 | American Conference of Governmental Industrial Hygienists | |
Coast Guard | 46 CFR 111.54-1(c)(1)(iii) | IEC 60947-2 | 2003 | Low-Voltage Switchgear and Controlgear Part 2: Circuit-Breakers, Third Edition | International Electrotechnical Commission | |
Research and Special Programs Administration | 21 CFR 131.112(e) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.2.3 | ASTM D 129 | 1995 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. V, 4, b | EPA Publication | 2005 | ENERGY STAR Program Requirements for Residential Light Fixtures, Version 4.0 | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 183.440(a) | SAE J-557 | 1968 | High Tension Ignition Cable | Society of Automotive Engineers | |
Coast Guard | 46 CFR 56.01-2(e)(12) | ASTM A 192/A 192M | 1996 | Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix A Section 1910.156 (8)(2) | NIOSH Publication | 1976 | Guide to Industrial Respiratory Protection | National Institute for Occupational Safety and Health | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA S-1.1 | 2005 | Pressure Relief Device Standards | Compressed Gas Association | |
Coast Guard | 33 CFR 183.607(a)(1) | AMCA 210 | 1974 | Laboratory Methods of Testing Fans for Ratings | Air Movement and Control Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.925(b)(1)(ii) | NACE RP-0502 | 2002 | NACE Standard Recommended Practice: Pipeline External Corrosion Direct Assessment Methodology | National Association of Corrosion Engineers | |
Housing and Urban Development Department | 24 CFR 200.946(a)(2) | UEATC Publication | 1988 | UEATC Directives for the Assessment of External Insulation Systems for Walls (expanded Polystyrene Insulation Faced with a Thin Rendering), section 3.3.3.3. | European Union of Agreement Technical Committee | |
Public Health Service | 42 CFR 84.41(b) | MIL-STD-105D | 1963 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(19) | SAE J-726 | 1979 | Air Cleaner Test Code | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (40) | EPA Method 608 | 1982 | Organochlorine Pesticides & PCBs by GC/ECD | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 14 CFR 25.795(e) | NIJ Standard 0101.04 | 2001 | Ballistic Resistance of Personal Body Armor, Revision A | National Institute of Justice | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Total Disolved Solids) | APHA Method 2540 C | 1998 | Solids, Total Dissolved Solids Dried at 180 degrees C | American Public Health Association | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(2)(xx)(B) | ASME B&PV Code | 2002 | Boiler and Pressure Vessel Code, Section XI, NDE provision in IWA-4540(a)(2) of the 2002 Addenda | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.57(g)(4)(i) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (42) | EPA Method 601 | 1982 | Purgeable Halocarbons | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | EPA Method 901.1 | 1980 | Gamma Emitting Radionuclides in Drinking Water | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.4360 | ASTM D 4810 | 1988 | Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length of Stain Detector Tubes | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/ASSE Z490.1 | 2001 | Criteria for Accepted Practices in Safety, Health, and Environmental Training | American Society of Safety Engineers | |
Environmental Protection Agency | 40 CFR 59.515(a)(2) | SCAQMD Method 318 | 1996 | Determination of Weight Percent Elemental Metal in Coatings by X-ray Diffraction | South Coast Air Quality Management District | |
Food and Drug Administration | 21 CFR 184.1472(a)(2)(vi) | AOCS Method Ca 5a-40 | 1989 | Free Fatty Acids | American Oil Chemists Society | |
Occupational Safety and Health Administration | 29 CFR 1915.156(b)(1)(ii) | ANSI Z41 | 1999 | Protective Footwear | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 52.741(e)(4) | 35 I.A.C. 215, Subpart K | 1989 | Section 215.301 or 215.302 | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.860(a)(6) | ASTM D 257 | 1991 | Standard Test Method for DC Resistance of Conductance of Insulating Materials | ASTM International |