This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 164.120-5(b)(2) | ASTM D 570 | 2005 | Standard Test Method for Water Absorption of Plastics | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (22) | APHA Method 3125 B | 2009 | Inductively Coupled Plasma/mass Spectrometric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.21(f)(3) Note | APHA Method 9222 B | 1997 | Membrane Filtration Qualitative (LES Endo): Total Coliform | American Public Health Association | |
Environmental Protection Agency | 40 CFR 799.5089(j) Table 3, C5 | ASTM E 1193 | 1997 | Standard Guide for Conducting Daphnia Magna Life-Cycle Toxicity Tests | ASTM International | |
Food and Drug Administration | 21 CFR 177.1430(c)(2) | ASTM D 445 | 1974 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids | ASTM International | |
Coast Guard | 21 CFR 177.1520(b) | ASTM D 611 | 1982 | Standard Test Method for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASME A112.18.1M | 1989 | Plumbing Fixture Fittings | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.503(c) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 160.076-11(b)(3) | UL 1191 | 2008 | UL Standard for Safety for Components for Personal Flotation Devices, Fourth Edition including revisions through August 24, 2011 | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.173(b)(1)(i) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Toxaphene) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 195.264(b)(2) | API 2510 | 2001 | Design and Construction of LPG Installations | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 300.915(c)(11) | APHA Method 6230 B | 2014 | Not found | American Public Health Association | |
Environmental Protection Agency | 40 CFR 80.2(kkkk)(1)(i) | ASTM D 975 | 2013 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Animal and Plant Health Inspection Service | 9 CFR 77.5, Non-accredited state or zone | USDA Uniform Methods and Rules | 1999 | Bovine Tuberculosis Eradication | U.S. Department of Agriculture | |
Mine Safety and Health Administration | 30 CFR 57.14130(h) | SAE J-1194 | 1999 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.110(a)(13) | Drawing No. SA-SID-M081 | 1987 | Leg Assembly, Left | Reprographic Technologies | |
Research and Special Programs Administration | 49 CFR 180.205(f)(1) | CGA C-8 | 1985 | Standard for Requalification of DOT-3HT Cylinders | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 13, 17(c) | ASTM D 6784 | 2008 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International | |
Federal Highway Administration | 23 CFR 625.4(b)(10) | AASHTO Publication | 1994 | Standard Specification for Structural Supports for Highway Signs, Luminaires, and Traffic Signals | American Association of State Highway and Transportation Officials | |
Energy Department | 10 CFR 440 Appendix A | NFPA 70 | 1993 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 33 CFR 164.72(a)(1)(i)(B) | RTCM Paper 71-95/SC112-STD | 1995 | Recommended Standards for Marine Radar Equipment Installed on Ships of Less Than 300 Tons Gross Tonnage | Radio Technical Commission for Maritime Services | |
Food and Drug Administration | 21 CFR 1.24(a)(6)(i) | NIST Handbook 44 | 2010 | Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDD, Table 4, (8) | EPA Method 0011 | 1986 | Sampling for Selected Aldehyde and Ketone Emissions from Stationary Sources | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.6(t)(1) | USPHS Publication | 1998 | U.S. Pharmacopeia | U.S. Public Health Service, U.S. Department of Health and Human Services | |
Public Health Service | 42 CFR 37.10(e)(1) | NCRP Report No. 102 | 1989 | Medical X-ray, Electron Beam, and Gamma-Ray Protection for Energies Up to 50 MeV (Equipment Design, Performance, and Use) | National Council on Radiation Protection and Measurement | |
Coast Guard | 46 CFR 111.105-31(n)(2) | IMO SOLAS | 1974 | Consolidated Text of the International Convention for the Safety of Life at Sea, 1974, and its Protocol of 1988: Article, Annexes and Certificates. (Incorporating all Amendments in Effect from January 2001) | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 571.5(e)(3) | MIL-S-21711E | 1982 | Shoes, Women's, including Amendment 2, October 14, 1994 | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (35) | EPA Method 505 | 1995 | Analysis of Organohalide Pesticides and Commercial Polychlorinated Biphenyl (PCB) Products in Water by Microextraction and Gas Chromatography - Revision 2.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Silver) | APHA Method 3113 B | 1992 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Coast Guard | 46 CFR 54.10-5(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(1) | SAE Publication | 1970 | SAE Handbook | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (35) | APHA Method 6200 C | 1997 | Volatile Aromatic Organic Compounds by GC/PID Purge & Trap | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.24(h)(13)(ii) | EPA Method 508 | 1995 | Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector - Revision 3.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.17(f)(7) | ASME MFC-9M | 1988 | Measurement of Liquid Flow in Closed Conduits by Weighing Method | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.860(m)(7)(i) | ASTM D 4566 | 1990 | Standard Test Method for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable | ASTM International | |
Environmental Protection Agency | 40 CFR 75, Appendix F, Section 3.3.6.2 | ASTM D 1826 | 1994 | Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | ASTM International | |
Occupational Safety and Health Administration | 16 CFR 1615.32(a)(1) Note 6 | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
Environmental Protection Agency | 40 CFR 58 Appendix D, 5.1 | EPA-454-B-93-051 | 1994 | Photochemical Assessment Monitoring Stations Implementation Manual | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 110.10-1(o)(11) | UL 1042 | 1994 | Electric Baseboard Heating Equipment | Underwriters Laboratories, Inc. | |
Surface Mining Reclamation and Enforcement Office | 30 CFR 870.20 Table 2 | ASTM D 1412 | 1993 | Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30 Degrees Celsius | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ACI 304R | 1989 | Guide for Measuring, Mixing, Transporting and Placing Concrete | American Concrete Institute | |
Federal Aviation Administration | 14 CFR 152.11(b) | 150/5320-5B | 1970 | Airport Drainage | Federal Aviation Administration, U.S. Department of Transportation | |
Rural Utilities Service | 7 CFR 1728.201(e)(1)(ii) | SPIB Publication | 1991 | Special Product Rules for Structural, Industrial, and Railroad-Freight Car Lumber | Southern Pine Inspection Bureau | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 1(d) | ASTM E 711 | 1987 | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter | ASTM International | |
Environmental Protection Agency | 40 CFR 80.46(a)(1) | ASTM D 2622 | 2010 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Rural Utilities Service | 7 CFR 1724.55(a)(2) | USACE ER 1110-2-1155 | 1995 | U.S. Army Corps of Engineers Engineering and Design Dam Safety Program, Appendix E | Department of the Army, U.S. Army Corps of Engineers | |
Coast Guard | 46 CFR 177.410(b) | MIL-R-21607E(SH) | 1990 | Resins, Polyester, Low Pressure Laminating, Fire Retardant | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (37) | ASTM D 1976 | 2007 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (10) Copper | EPA Method 200.7 | 1994 | ICP - metals | U.S. Environmental Protection Agency |