Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Standards Incorporated by Reference (SIBR) Database
If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.
Accessing Standards Incorporated by Reference
This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
| Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|---|
| Occupational Safety and Health Administration | 29 CFR 1910.261(f)(5) | ANSI Z88.2 | 1969 | Respiratory Protection | American National Standards Institute | |
| Coast Guard | 46 CFR 56.30-25(a) | ASTM F 1387 | 1993 | Standard Specification for Performance of Mechanically Attached Fittings | ASTM International | |
| Environmental Protection Agency | 40 CFR 272.751(b)(1) | INHWMP | 1974 | State of Indiana Statutes and Regulations for Approved State Hazardous Waste Management Programs | State of Indiana | |
| Rural Utilities Service | 7 CFR 1755.870(b)(5)(i) | ASTM D 1248 | 1989 | Standard Specification for Polyethylene Plastics Molding and Extrusion Materials | ASTM International | |
| Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.400-18(b) | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IB (48) | EPA Method 420.1 | 1978 | Phenolics, Total Recoverable (Spectrophotometric, Manual 4-AAP with Distillation) | U.S. Environmental Protection Agency | |
| Coast Guard | 46 CFR 56.01-2(e)(9) | ASTM A 178/A 178M | 1995 | Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | IEEE 62 | 1995 | Guide for Diagnostic Field Testing of Electric Power Apparatus—Part 1: Oil Filled Power Transformers, Regulators, and Reactors | Institute of Electrical and Electronics Engineers | |
| National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (13) | ASTM D 511B | 2008 | Calcium by Flame Atomic Absorption | ASTM International | |
| Coast Guard | 46 CFR 147.7(f)(4) | UL 1314 | 1984 | Standard for Special-Purpose Containers | Underwriters Laboratories, Inc. | |
| Environmental Protection Agency | 40 CFR 763.90(i)(5) | NIOSH Analytic Method 7400 | 1987 | NIOSH Manual of Analytic Methods, Fibers | National Institute for Occupational Safety and Health | |
| Environmental Protection Agency | 40 CFR 266.106(g)(1) | EPA Method 0060 | 1996 | Determination of Metals in Stack Emissions | U.S. Environmental Protection Agency | |
| Federal Motor Carrier Safety Administration | 49 CFR 393.55(d)(2) | FMVSS 121 | 1998 | Air Brake Systems | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
| Coast Guard | 46 CFR 54.10-5(b) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table ID Footnote 10 | EPA Method 508 | 1995 | Determination of Chlorinated Pesticides in Water by Gas Chromatography with an Electron Capture Detector - Revision 3.1 | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (10) | EPA Method 283.2 | 1978 | Titanium (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 98.344(c)(4) | ASME MFC-7M | 1992 | Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles | American Society of Mechanical Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1926.552(d) | ANSI A17.1c | 1969 | Safety Code for Elevators, Dumbwaiters and Moving Walks | American National Standards Institute | |
| Federal Aviation Administration | 14 CFR 121.345(c)(2)(i) | FAA TSO-C74c | 1973 | Airborne ATC Transponder Equipment | Federal Aviation Administration, U.S. Department of Transportation | |
| Coast Guard | 46 CFR 160.151-15(m) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
| Environmental Protection Agency | 40 CFR 1065.1010(b)(36) | ASTM D 5599 | 2010 | Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection | ASTM International | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Phenol) | ASTM D 4763 | 1988 | Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy | ASTM International | |
| Environmental Protection Agency | 40 CFR 147.2400(b)(5) | WAUIC regulations | 1986 | Revised Code of Washington, chapter 90.48 (Bureau of National Affairs, 1986 Laws), entitled, Water Pollution Control | State of Washington | |
| Environmental Protection Agency | 40 CFR 63.11452(b)(11) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
| Coast Guard | 46 CFR 182.130 | ABYC H-33 | 1989 | Diesel Fuel Systems | American Boat and Yacht Council | |
| Food and Drug Administration | 21 CFR 131.115(d)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
| Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | MSS SP-73 | 1991 | Brazing Joints for Wrought and Cast Copper Alloy Solder Joint Pressure Fittings | Manufacturers Standardization Society of the Valve and Fittings Industry | |
| Federal Railroad Administration | 49 CFR 229.51(a)(2) | ASME B&PV Code | 1971 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 98.7(q)(1) | DOE/EIA0370(08) | 2009 | Oil and Gas Field Code Master List, 2008 Edition | U.S. Department of Energy | |
| Public Health Service | 46 CFR 160.062-1(a)(1) | MIL-STD-105D | 1993 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
| Research and Special Programs Administration | 49 CFR 178.337-8(b)(1) | CI Drawing No. 101-7 | 1993 | Excess Flow Valve with Removable Seat | Chlorine Institute, Inc. | |
| Coast Guard | 33 CFR 142.39(b)(2) | ANSI Z88.2 | 1980 | Respiratory Protection | American National Standards Institute | |
| Coast Guard | 46 CFR 160.026-1(a)(1) | MIL-W-15117 | 1998 | Water, drinking, canned, emergency | U.S. Department of Defense | |
| Occupational Safety and Health Administration | 29 CFR 1915.507(d)(5) | NFPA 12A | 2004 | Standard on Halon 1301 Fire Extinguishing Systems | National Fire Protection Association | |
| Coast Guard | 46 CFR 13.507 | IMO Resolution A.437 (XI) | 1979 | Training of Crews in Fire Fighting | International Maritime Organization | |
| National Highway Traffic Safety Administration | 49 CFR 572.111(a)(5) | Drawing No. SA 150 M060 | 1994 | Pelvis and Abdomen Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IC (101) | EPA Method 610 (GC) | 1982 | Polynuclear Hydrocarbons by GC/FID | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 141.131(b)(1) Table | EPA Method 300.1 | 1997 | Ion chromatography - anions, Revision 1.0 | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 63.14(g)(28) | ASTM D 2908 | 1974 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography | ASTM International | |
| Food and Drug Administration | 21 CFR 184.1205(b) | Food Chemicals Codex | 1981 | Calcium Hydroxide | National Academy Press | |
| Homeland Security Department | 6 CFR 37.17(e)(1) | ISO/IEC 19794-5:2005(E) | 2005 | Information technology—Biometric Data Interchange Formats—Part 5: Face Image Data | International Organization for Standardization / International Electrotechnical Commission | |
| Federal Aviation Administration | 14 CFR 71.33(c) | FAA Order 7400.9X | 2013 | Airspace Designations and Reporting Points | Federal Aviation Administration, U.S. Department of Transportation | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IB (64) | AOAC Method 973.40 | 1998 | Specific conductance of water | AOAC International | |
| Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 13 | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 60.41c Residual oil | ASTM D 396 | 1978 | Standard Specification for Fuel Oils | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1926.1001(f)(2)(iv) | ASTM A 370 | 2014 | Methods and Definitions for Mechanical Testing of Steel Products | ASTM International | |
| Coast Guard | 29 CFR 1917.93(b)(1)(ii) | ANSI/ISEA Z89.1 | 1997 | Safety Requirements for Industrial Head Protection | International Safety Equipment Association | |
| Coast Guard | 46 CFR 113.37-10(b) | IEC 60529 | 2001 | Degrees of Protection Provided by Enclosures (IP Code) | International Electrotechnical Commission | |
| Rural Utilities Service | 33 CFR 154, Appendix A, 8.6 | ASME B&PV Code | 2005 | Section VIII, Division 1, Pressure Vessels | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 60.664(e)(2)(ii) | ASTM D 1946 | 1977 | Standard Method for Analysis of Reformed Gas by Gas Chromatography | ASTM International |