DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.151-21(l) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.135-5(b)(12) | ASTM F 1166 | 2007 | Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.185(c)(1)(i) | Drawing No. 175-8000 | 2009 | Neoprene Body Suit | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (bromochloromethane (Halon 1011)) | EPA Method 524.3 | 0 | Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60 Subpart MMMM, Table 3, Sulfur Dioxide | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 430 Subpart B, App. N, 7.0 | ASHRAE 103 | 1993 | Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (16) Mercury | APHA Method 3112 B | 1995 | Mercury by Cold Vapor Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7091 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(21) | AWS D1.4-98 | Structural Welding Code—Reinforcing Steel | American Welding Society | ||
Occupational Safety and Health Administration | 29 CFR 1910.107(d)(1) | NFPA 91 | 1961 | Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying | National Fire Protection Association | |
National Archives and Records Administration | 36 CFR 1238.5(e)(1) | NAPM IT2.19 | 1994 | American National Standard for Photography--Density Measurements--Part 2: Geometric Conditions for Transmission Density | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/NWWDA I.S. 1 | 1987 | Industry Standard for Wood Flush Doors | National Wood Window and Door Association | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ANSI/APA 1 | 1984 | Mosaic-Parquet Hardboard Slat Flooring | APA--The Engineered Wood Association | |
Mine Safety and Health Administration | 30 CFR 57.12045 | NFPA 70 | 0 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 39.2009(a)(2)(ix) | IEC 60309-2 | 2012 | Plugs, Socket-Outlets and Couplers for Industrial Purposes—Part 2: Dimensional Interchangeability Requirements for Pin and Contact-tube Accessories, Edition 4.2 2012-05 | International Electrotechnical Commission | |
Research and Special Programs Administration | 24 CFR 200.926a(c)(5) | ASCE 7 | 1995 | Minimum Design Loads for Buildings and Other Structures | American Society of Civil Engineers | |
Rural Utilities Service | 7 CFR 1755.860(a)(6) | ASTM E 8 | 1991 | Standard Test Method for Tension Testing of Metallic Materials | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.358-5(c) | ASTM A 240/A 240M | 1999 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels | ASTM International | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-10C | 1971 | Specification for L-828 Constant Current Regulators | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 110.15-1(b), Dripproof | IEC 60529 | 2001 | Degrees of Protection Provided by Enclosures (IP Code), Edition 2.1 | International Electrotechnical Commission | |
National Highway Traffic Safety Administration | 49 CFR 572.33(b) | Drawing No. 78051-94 | 0 | Title not specified | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (61) | EPA Method 619 | 1993 | Triazine Pesticides by Liquid/Liquid Extraction and GC/NPD | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Coast Guard | 33 CFR 154, Appendix B, 8.4 | ASTM F 1155 | 1998 | Standard Practice for Selection and Application of Piping System Materials | ASTM International | |
Coast Guard | 46 CFR 161.002-4(b)(3) | Lloyd's Publication | 1998 | LR Type Approval System: Test Specification Number 1 | Lloyd's Register of Shipping | |
Environmental Protection Agency | 40 CFR 80.580(e)(1)(iv) | ASTM D 6920 | 2013 | Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection | ASTM International | |
Food and Drug Administration | 21 CFR 172.869(b)(4) | MCC Publication | 1998 | Method for Measuring the Ester Distribution mof Sucrose Oligoesters | Mitsubishi Chemical Corporation | |
Occupational Safety and Health Administration | 29 CFR 1926.1440(c)(4) | ASME B30.14, Section 14-1.7.1 | 2004 | Side Boom Tractors, Booms | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (69) | EPA Method 1613 B | 1997 | Tetra- through Octa-Chlorinated Dioxins and Furans by Isotope Dilution GC/HRMS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 1657 | 1993 | The Determination of Organo-Phosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (8) | APHA Method 2540 D | 1997 | Solids, Total Suspended Solids Dried at 103-105 degrees C | American Public Health Association | |
Environmental Protection Agency | 40 CFR 98.334(b)(2)(i) | ASTM E 1941 | 2004 | Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Isopropyl acetate) | EPA Method 1666 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.1050(a)(3) | MDUIC regulations | 1989 | Code of Maryland Regulations, Title 26, Subtitle 08, Chapter 02, promulgated and effective as of March 1, 1989 | State of Maryland | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 5, (1)(d) | ASTM E 711 | 1987 | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(2)(ii) | EPA-600-4-79-020 | 1983 | Method 208.1--Atomic Absorption: direct aspiration | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.047-1(a)(1) | FedSpec L-P-375C | 0 | Plastic Film, Flexible, Vinyl Chloride | Federal Specifications Standards and Test Methods | |
Energy Department | 10 CFR 430 Subpart B, App. Q, 3.1 | ANSI C82.2 | 2002 | Fluorescent Lamp Ballasts--Methods of Measurement | American National Standards Institute | |
Coast Guard | 46 CFR 76.01-2(b)(1) | ASTM F 1121 | 2010 | Standard Specification for International Shore Connections for Marine Fire Applications | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(q)(1)(vi)(B) | 35 I.A.C. 215 | 1989 | Administrative Code, Section 215(a)(2) | State of Illinois | |
Environmental Protection Agency | 40 CFR 92.113 Table B113-1 | ASTM D 613 | 1995 | Standard Test Method for Cetane Number of Diesel Fuel Oil | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. M, 3.7, b | ASHRAE 37 | 2005 | Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 56.20-1(c)(2)(i) | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (50) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.111(a)(7) | Drawing No. 96-SIDH3-001 | 1996 | Head-Neck Bracket | Reprographic Technologies | |
Coast Guard | 40 CFR 136.3(a) Table IB (37) | ASTM D 1886B | 2008 | Standard Test Methods for Nickel in Water, Atomic Absorption, Chelation-Extraction | ASTM International | |
Environmental Protection Agency | 40 CFR 75.6(a)(49) | ASTM D 5453 | 2006 | (DUP) Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine, Fuel, and Engine Oil by Ultraviolet Fluorescence | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(1)(i) | ANSI A14.1 | 1975 | Safety Requirements for Portable Wood Ladders | American National Standards Institute | |
Federal Motor Carrier Safety Administration | 49 CFR 393.86(a)(1) | FMVSS 223 | 1998 | Rear Impact Guards | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.151-21(l) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization |