This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 110.10-1(k)(6) | NEMA WC-70/ICEA S-95-658 | 1999 | Standard for Non-Shielded Power Rated Cable 2000V or Less for the Distribution of Electrical Energy | National Electrical Manufacturers Association | |
Energy Department | 10 CFR 430 Subpart B, App. S, 2a | ASME A112.18.1M | 1996 | Plumbing Fixture Fittings | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.135-15(e)(1)(vi) | ASTM A 36/A 36M | 2008 | Standard Specification for Carbon Structural Steel | ASTM International | |
Environmental Protection Agency | 40 CFR 1043.20 EIAPP certificate | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(iv)(N) | EPA Method 631 | 1993 | The Determination of Benomyl and Carbendazim in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (3) | EPA Method 218.1 | 1971 | Chromium (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(g)(10) | SAE J-1939-13 | 1999 | Off-Board Diagnostic Connector | Society of Automotive Engineers | |
Energy Department | 10 CFR 440 Appendix A | ASTM E 84 | 1989 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
Mine Safety and Health Administration | 21 CFR 178.3770(a)(4) Footnote 1 | NIST Circular 484 | 1949 | Spectrophotometry | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | APHA Method 4500-Cl F | 2014 | Chlorine, DPD Ferrous Titrimetric | American Public Health Association | |
Coast Guard | 46 CFR 183.540 | ANSI A17.1 | 1984 | Safety Code for Elevators, Dumbwaiters and Moving Walks | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 147.850(a)(2) | KSUIC regulations | 1986 | Chapter 28, Article 46, Underground Injection Control Regulations, Kansas Administrative Regulations §§ 28-46-1 through 28-46-42 (1986 and Supp. 1987) | State of Kansas | |
Environmental Protection Agency | 40 CFR 63.457(b)(5)(i) | ASTM D 6420 | 2004 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 435.15 Note 6 | EPA Method 1647 | 2015 | Protocol for the Determination of Degradation of Non Aqueous Base Fluids in a Marine Closed Bottle Biodegradation Test System: Modified ISO 11734:1995 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.2200(a)(1) | TXUIC regulations | 2002 | Texas Statutory and Regulatory Requirements Applicable to the Underground Injection Control Program for Class I, III, IV, and V Wells, except for Class III Brine Mining Wells | State of Texas | |
Environmental Protection Agency | 40 CFR 89.6(a)(1) | ASTM D 86 | 1997 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart ZZZZ, Table 4, (1)(a)(ii)(1) | ASTM D 6522 | 2000 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.304(f) | ANSI O1.1 | 1961 | Safety Code for Woodworking Machinery | American National Standards Institute | |
Coast Guard | 46 CFR 114.600(b) | UL 1104 | 1988 | Marine Navigation Lights | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.41(a)(6) | Drawing No. SA 150 M080 | 1987 | Right leg assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IE (3) | EPA Method 900.0 | 1980 | Gross Alpha and Gross Beta Radioactivity | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.134(a) | Drawing No. 880105-300 | 2000 | Upper Torso Assembly | Reprographic Technologies | |
Research and Special Programs Administration | 49 CFR 193.2013(c)(1) | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 154.106(c)(3) | ANSI B31.3 | 1987 | Chemical Plant and Petroleum Refinery Piping, (including B31.3a-1988, B31.3b-1988, and B31.3c-1989 addenda) | American National Standards Institute | |
Food and Drug Administration | 21 CFR 172.800(b)(2) | Food Chemicals Codex | 1981 | Method III of the Fluoride Limit Test | National Academy Press | |
Health and Human Services Department | 45 CFR 162.1402(b)(2) | ASC X12N 276/277 | 2006 | Health Care Claim Status Request and Response | Washington Publishing Company | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(83) | API MPMS | 2004 | Chapter 11—Physical Properties Data, Section 1—Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils; incorporating Addendum 1, September 2007 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (82) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) Table (Chlorine Dioxide) | APHA Method 4500-ClO2 C | 2014 | Chlorine Dioxide, Amperometric Titration | American Public Health Association | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(20) | EPA-520-5-84-006 | 1984 | Radiochemistry Procedures Manual | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | TTMA RP No. 61 | 1998 | Performance of Manhole and/or Fill Opening Assemblies | Truck Trailer Manufacturers Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (21) pH | ASTM D 1293 | 1995 | Standard Test Method for Pour Point of Petroleum Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(206) | ASTM E 2780 | 2010 | Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters | ASTM International | |
Coast Guard | 46 CFR 160.050-3(b) | Federal Standard 595 | 1956 | Colors | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 12.30-5 | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.346-3(b)(3) | TTMA RP No. 81 | 1997 | Performance of Spring Loaded Pressure Relief Valves | Truck Trailer Manufacturers Association | |
National Highway Traffic Safety Administration | 49 CFR 572.161 Table A | Drawing No. 167–2000 | 2009 | Upper Torso Assembly | Leet-Melbrook | |
Coast Guard | 46 CFR 160.022-4(d)(8) | NIST Report 4792 | 1956 | Development of a Laboratory Test for Evaluation of the Effectiveness of Smoke Signals | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.23 | 2002 | Cast Copper Alloy Solder Joint Drainage Fittings: DWV | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (60) | APHA Method 3125 B | 2009 | Inductively Coupled Plasma/Mass Spectrometric Method | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1910.269(u)(1) Note | ANSI C2 | 1987 | National Electrical Safety Code | American National Standards Institute | |
Food and Drug Administration | 21 CFR 184.1259(b)(8) | FOC Publication | 2012 | Modification of Japan Institute of Oils and Fats: Analysis Method of Residual Ethyl Esters of Fatty Acids | Fuji Oil Company, Limited | |
Environmental Protection Agency | 40 CFR 63.14(k)(8) | CASCAQMD Publication | 1989 | Spray Equipment Transfer Efficiency Test Procedure for Equipment User | State of California, South Coast Air Quality Management District's | |
Health and Human Services Department | 45 CFR 162.1202(a)(1) | NCPDP Publication | 2000 | Batch Standard Batch Implementation Guide, Version 1, Release 1 | National Council for Prescription Drug Programs | |
Rural Utilities Service | 7 CFR 1755.860(a)(6) | ASTM D 1238 | 1990 | Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(f)(5) | ANSI Z88.2 | 1969 | Respiratory Protection | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1755.506(k) | 7 CFR 1755.510 | 2012 | Construction and assembly unit drawings | Rural Utilities Service, U.S. Department of Agriculture | |
Environmental Protection Agency | 40 CFR 90, Subpart D, Appendix A, Table 3 | ASTM D 86 | 1993 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Coast Guard | 46 CFR 58.01-5 | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels, Part 4 Vessel Systems and Machinery | American Bureau of Shipping | |
Coast Guard | 46 CFR 160.156-5(b)(6) | ASTM B 209 | 2007 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate | ASTM International |