DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 143.4(b) Table (Aluminum) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(e) | ASTM D 4177 | 1995 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, including Annexes A1 through A6 and Appendices X1 and X2 | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.952(a)(2) | ANSI A208.1 | 1979 | Wood Particleboard | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (17) | EPA Method 606 | 1982 | Phthalate Esters by GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Ethylene dibromide (EDB)) | EPA Method 504.1 | 1995 | 1,2-Dibromoethane (EDB), 1,2-Dibromo-3-Chloropropane (DBCP), and 1,2,3- Trichloropropane (123TCP) in Water by Microextraction and Gas Chromatography - Revision 1.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.4243(d)(2)(ii) | NAERC EOP-002-3 | 2012 | Capacity and Energy Emergencies | North American Electric Reliability Corporation | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix D Table | NFPA 1971 | 1975 | Protective Clothing for Structural Fire Fighting | National Fire Protection Association | |
Federal Communications Commission | 47 CFR 73.682(d) | ATSC A/52 | 1995 | Standard Digital Television Compression (AC-3) | Advanced Television Systems Committee | |
Mine Safety and Health Administration | 30 CFR 57 Subpart C Appendix I | NFPA 14 | 0 | Standpipe and Hose Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 98.7(e)(26) | ASTM D 5291 | 2007 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants | State of California | |
Rural Utilities Service | 7 CFR 1755.405(e)(5) | ANSI T1.506 | 1990 | Specifications for Switched Exchange Access Network | American National Standards Institute | |
Coast Guard | 46 CFR 97.36-1(a) | IMO Resolution A.654(16) | 0 | Graphical Symbols for Fire Control Plans | International Maritime Organization | |
Energy Department | 10 CFR 434.701.1 RS-44 | NEMA MG-11 | 1993 | Energy Management Guide for Selection and Use of Single-Phase Motors (RS-44) | National Electrical Manufacturers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 180.207(d)(2) | ISO 10461 | 2005 | Gas cylinders--Seamless aluminum alloy gas cylinders--Periodic inspection and testing | International Organization for Standardization | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(i)(B) | APHA Standard Methods | 1980 | Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.261(t) Ferrochrome silicon | ASTM A 482 | 1993 | Standard Specification for Ferrochromesilicon | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(54) | ANSI Z12.20 | 1969 | Code for the Prevention of Dust Explosions in Woodworking and Wood Flour Manufacturing Plants | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200.926d(b)(3)(i) | HUD Handbook 4910.1 | 1994 | Minimum Property Standards for Housing | U.S. Department of Housing and Urban Development | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(1)(i) | ISO 14125:1998(E) | 1998 | Fibre-reinforced plastic composites—Determination of flexural properties, First Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (30) | APHA Method 3125 B | 2009 | Inductively Coupled Plasma/mass Spectrometric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (3) Arsenic | ASTM D 2972C | 2003 | Arsenic by Graphite Furnace Atomic Absorption | ASTM International | |
Environmental Protection Agency | 40 CFR 52.01(g) | ASTM D 2015 | 1996 | Standard Test Method for Gross Calorific Value of Solid Fuel by the Adiabatic Bomb Calorimeter | ASTM International | |
Coast Guard | 46 CFR 160.077-21(c)(5)(i) | UL 1517 | 0 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(4) | Drawing No. 420-8000 | 2011 | Spine box assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 11 | APHA Method 9221 B | 2006 | Multiple Tube Fermentation Qualitative (LTB): Total Coliform | American Public Health Association | |
Environmental Protection Agency | 40 CFR 430, Appendix A, Method 1653 (18.5) | OSHA Publication 2206 | 1976 | OSHA Safety and Health Standards, General Industry | Occupational Safety and Health Administration, U.S. Department of Labor | |
Environmental Protection Agency | 40 CFR 80.47(m)(7) | ASTM D 6708 | 0 | Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material | ASTM International | |
Food and Drug Administration | 21 CFR 173.400(c)(2)(ii) | FDA Publication | 1990 | Colorimetric Determination of Residual Quaternary Ammonium Compounds (Arquad HTL8) in Sugar and Sugar Solutions | Food and Drug Administration, U.S. Department of Health and Human Services | |
Occupational Safety and Health Administration | 29 CFR 1910.106(a)(14)(ii) | ASTM D 93 | 1971 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
National Archives and Records Administration | 36 CFR 1235.46(d)(1) | NISO 9660 | 1990 | Volume and File Structure of CD-ROM for Informational Exchange | National Information Standards Organization | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | NOFMA Publication | 1986 | Hardwood Flooring Installation Manual | National Oak Flooring Manufacturers Association | |
Environmental Protection Agency | 40 CFR 63.3165(e) | EPA-450-3-88-018 | 1988 | Protocol for Determining the Daily Volatile Organic Compound Emission Rate of Automobile and Light-Duty Truck Topcoat Operations | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 440 Appendix A | ANSI Z21.8 | 1984 | Gas Conversion Burners | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.110(e)(3)(i), Table H-32 | ASME B&PV Code | 1949 | Boiler and Pressure Vessel Code, Section VIII, Paragraph U-201 | American Society of Mechanical Engineers | |
Mine Safety and Health Administration | 30 CFR 56.12048 | NFPA 70 | 0 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 111.25-5(a) | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association | |
Research and Special Programs Administration | 21 CFR 177.1200(c) | ASTM D 127 | 1960 | Standard Method of Test for Melting Point of Petrolatum and Microcrystalline Wax | ASTM International | |
Environmental Protection Agency | 40 CFR 600.315-08(c) | SAE RP 1100a | 1973 | Motor Vehicle Dimensions—Recommended Practice (Report of Human Factors Engineering Committee | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 91, Subpart D, Appendix A, Table 3 | ASTM D 3231 | 1989 | Standard Test Method for Phosphorous in Gasoline | ASTM International | |
Coast Guard | 46 CFR 58.03-1(g)(7) | ASTM D 92 | 1997 | Standard Test for Flash and Fire Points by Cleveland Open Cup | ASTM International | |
Research and Special Programs Administration | 21 CFR 178.3620(d)(3) V.B.19.b | ASTM E 169 | 1981 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (18) | ASTM D 1687A | 2007 | Standard Test Methods for Chromium in Water, Photometric Diphenyl- carbohydrazide | ASTM International | |
Environmental Protection Agency | 40 CFR 60.17(g)(166) | ASTM D 4810 | 1988 | Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length of Stain Detector Tubes | ASTM International | |
Food and Drug Administration | 21 CFR 172.841(b) | 1st Supplement, 5th Edition, Food Chemical Index | 2006 | Polydextrose | National Academy Press | |
Veterans Affairs Department | 38 CFR 17.63(a)(4)(i) | NFPA 10 | 2010 | Portable Fire Extinquishers | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(35) | SAE J-942 | 1965 | Passenger Car Windshield Washer Systems | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (41) | 3M Test Method 0222 | 1994 | Organochlorine Pesticides and PCBs in Wastewater Using Empore Disk | 3M Corporation | |
Environmental Protection Agency | 40 CFR 147, Subpart BB, Appendix A(a)(3) | MTUIC regulations | 1995 | Montana Code annotated, 1995, Title 82, Chapter 11: | State of Montana | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(4)(i) | NRC Regulatory Guide 1.84 | 2010 | Design, Fabrication, and Materials Code Case Acceptability, ASME Section III, Revision 35 | U.S. Nuclear Regulatory Commission | |
Occupational Safety and Health Administration | 29 CFR 1926.97(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D 178 | 2010 | Standard Specification for Rubber Insulating Matting | ASTM International |