DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Housing and Urban Development Department | 24 CFR 200.935(d)(4)(ii)(A)(1) | ASQ Q9000-1 | 1994 | Quality Management and Quality Assurance Standard Guidelines for Selection and Use | American Society for Quality Control | |
Rural Utilities Service | 7 CFR 1755.860(b)(11)(ii) | ASTM D 4565 | 1990 | Standard Test Method for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunication Wire and Cable | ASTM International | |
Environmental Protection Agency | 40 CFR 86.113-04(a)(1) Table 1 | ASTM D 2622 | 2010 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Food and Drug Administration | 21 CFR 168.122(d)(5) | AOAC Official Methods | 1984 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 110.10-1(o)(10) | UL 913 | 2003 | Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III Division 1, Hazardous (Classified) Locations | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 58.03-1(k)(1) | UL 1111 | 1988 | Marine Carburetor Flame Arresters | Underwriters Laboratories, Inc. | |
Energy Department | 10 CFR 434.402.2.2.5(c) | ASHRAE Handbook | 1993 | Fundamentals (RS-4) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Environmental Protection Agency | 40 CFR 52.741(v)(1)(i) | 35 I.A.C. 215, Subpart S | 1989 | Administrative Code | State of Illinois | |
Coast Guard | 46 CFR 56.15-1(c)(2)(i) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (50) | APHA Method 4500-P G | 1999 | Phosphorus, Flow Injection Analysis for Orthophosphate | American Public Health Association | |
National Highway Traffic Safety Administration | 49 CFR 572.116(f) | SAE J-211 | 1995 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(23) | API RP 2I | 2008 | In-Service Inspection of Mooring Hardware for Floating Structures | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 141.131(b)(1) Table | EPA Method 327.0 | 2005 | Determination of Chlorine Dioxide and Chlorite Ion in Drinking Water Using Lissamine Green B and Horseradish Peroxidase with Detection by Visible Spectrophotometry, Revision 1.1 | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.159 | ANSI/NFPA 22 | 0 | Water Tanks | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 63.14(g)(31) | ASTM D 2908 | 2005 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 6.2 | ASTM D 2369 | 1990 | Standard Test Method for Volatile Content of Coatings | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.91(a)(1) | Drawing No. 126-0017 | 1992 | Construction of the Newborn Infant Dummy | Reprographic Technologies | |
Coast Guard | 46 CFR 160.151-21(g) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1065.705(b)(1) | IP-501 | 2005 | Determination of aluminum, silicon, vanadium, nickel, iron, sodium, calcium, zinc and phosphorus in residual fuel oil by ashing, fusion and inductively coupled plasma emission spectrometry | Energy Institute | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(v)(H) | EPA Method 531.1 | 1995 | Measurement of N-Methylcarbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post Column Derivatization -Revision 3.1. | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 13 | APHA Method 3113 B | 2004 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Coast Guard | 46 CFR 111.107-1(b) | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 60.41c Residual oil | ASTM D 396 | 1992 | Standard Specification for Fuel Oils | ASTM International | |
Coast Guard | 33 CFR 154, Appendix A, 3.3.1 | ASME B&PV Code | 0 | Section IX, Welding and Brazing Qualifications. | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Triethlyamine) | EPA Method 1666 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(G)(1)(ii) | EPA-600-4-79-020 | 1983 | Method 202.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | ASTM D 1049 | 2010 | Standard Specification for Rubber Insulating Covers | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IB (37) | ASTM D 1886A | 2008 | Standard Test Methods for Nickel in Water, Atomic Absorption, Direct | ASTM International | |
Coast Guard | 46 CFR 183.340(b)(4) | ABYC E-8 | 2001 | Alternating Current (AC) Electrical Systems on Boats | American Boat and Yacht Council | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-48 | 1976 | Specification for Runway and Taxiway Edge Lights | Federal Aviation Administration, U.S. Department of Transportation | |
Research and Special Programs Administration | 49 CFR 195.3(c) D1 | MSS SP-75 | 2004 | Specification for High-Test Wrought Butt Welding Fittings | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Environmental Protection Agency | 40 CFR 61.270(a) | ASTM D 836 | 1984 | Standard Specification for Industrial Grade Benzene | ASTM International | |
Coast Guard | 46 CFR 125.180(b) | IMO Resolution A.520(13) | 1983 | Code of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life-saving Appliances and Arrangements | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.113 | Drawing No. 78051-104 | 0 | Neck Assembly, revision F | General Motors Corporation | |
Coast Guard | 33 CFR 154.735(q) | NFPA 70 | 1987 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 264.1063(d)(1) | ASTM E 260 | 1985 | Standard Practice for Packed Column Gas Chromatography | ASTM International | |
Federal Motor Carrier Safety Administration | 49 CFR 393.25(b) | FMVSS 108 | 1998 | Lamps, Reflective Devices, and Associated Equipment | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 799.5087(h)(1)(i) | ASTM E 324 | 1999 | Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals | ASTM International | |
Environmental Protection Agency | 40 CFR 98.254(d)(6) | ASTM D 2503 | 2007 | Standard Test Method for Molecular Weight (Relative Molecular Mass) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure | ASTM International | |
Research and Special Programs Administration | 18 CFR 38.2(a)(3) | NAESB Publication | 2009 | Open Access Same-Time Information Systems (OASIS) Data Dictionary, Version 1.5 with minor corrections | North American Energy Standards Board Wholesale Electric Quadrant | |
Occupational Safety and Health Administration | 29 CFR 1915.172(a) | ASME B&PV Code | 1963 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Coast Guard | 33 CFR 126.15(b)(4) | NFPA 307 | 1995 | Standard for the Construction and Fire Protection of Marine Terminals, Piers, and Wharves | National Fire Protection Association | |
Federal Aviation Administration | 14 CFR 91.225(b)(1)(i) | FAA TSO-C166b | 2009 | Extended Squitter Automatic Dependent Surveillance-Broadcast (ADS-B) and Traffic Information Service-Broadcast (TIS-B) Equipment Operating on the Radio Frequency of 1090 Megahertz (MHz) | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (104) | APHA Method 6200 B | 1997 | Volatile Organic Compounds by Purge and Trap GC/MS | American Public Health Association | |
Energy Department | 10 CFR 430 Subpart B, App. P, 3 | ANSI Z21.56 | 1994 | Gas-Fired Pool Heaters | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 266, Appendix IX, 2.2.11(2) | EPA Publication | 1978 | Traceability Protocol for Establishing True Concentrations of Gases Used for Calibration and Audits of Continuous Source Emission Monitors (Protocol No. 1) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.1656(b)(7)(ii) | ASTM D 7520 | 2013 | Standard Test Method for Determining the Opacity in a Plume in an Outdoor Ambient Atmosphere | ASTM International | |
Drug Enforcement Administration | 21 CFR 1311.210(c)(1) | FIPS Publication 186-3 | 2009 | Digital Signature Standard (DSS) | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (65) | ASTM D 4327 | 2003 | Inorganic Anions by Ion Chromatography | ASTM International | |
Rural Utilities Service | 7 CFR 1755.890(i)(3) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association |