DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 96.07-5(b)(2) | ABS Publication | 0 | All ABS Standards | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 571.208 S25.4(a)(1) | SAE J-211/1 | 1980 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.902(l)(4)(iv) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable, 4th edition | Insulated Cable Engineers Association | |
Coast Guard | 46 CFR 110.10-1(f)(6) | IEEE 45 | 2002 | Recommended Practice for Electrical Installations On Shipboard | Institute of Electrical and Electronics Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.15(b) | Drawing No. SA 103C 061 | 1976 | Upper Leg Assembly Left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (53) | APHA Method 6630 B | 2000 | Organochlorine Pesticides by Liquid/Liquid Extraction and GC/ECD | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60 Subpart MMMM, Table 3, Sulfur Dioxide | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(6)(ii)(D)(1) | ASME Code Case N-729-1 | 2006 | Alternative Examination Requirements for PWR Reactor Vessel Upper Heads with Nozzles Having Pressure-Retaining Partial-Penetration Welds, Section XI, Division 1 | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(b)(6) | ANSI B30.5, 5-1.3.3 | 2004 | Safety Code for Crawler, Locomotive and Truck Cranes, Telescoping Boom | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (58) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (bromochloromethane (Halon 1011)) | EPA Method 524.3 | 0 | Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 18.0, Table 29-3 | EPA Method 7091 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(21) | AWS D1.4-98 | Structural Welding Code—Reinforcing Steel | American Welding Society | ||
Food and Drug Administration | 21 CFR 139.150(a)(4) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 160.061-1(a)(1) | FedSpec QQ-W-423 | 0 | Wire, Steel, Corrosion-Resisting | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (16) Mercury | APHA Method 3112 B | 1995 | Mercury by Cold Vapor Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID | APHA Standard Methods, 15th Edition | 1980 | Standard Methods for the Examination of Water and Wastewater. 15th Edition | American Public Health Association | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASTM F 1200 | 1993 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(w)(1)(i) | 35 I.A.C. 215, Subpart B | 1989 | Administrative Code | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.870(a)(6) | ASTM D 4101 | 1988 | Standard Specification for Propylene Plastic Injection and Extrusion Materials | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.200-13(a) | AAR Publication | 2000 | Specification for Tank Cars, Appendix E | Association of American Railroads | |
Food and Drug Administration | 21 CFR 573.640(b)(4)(ii) | AOAC Official Methods | 1975 | Official Methods of Analysis | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(j)(2) | ANSI B20.1 | 1957 | Safety Code for Conveyors, Cableways, and Related Equipment | American National Standards Institute | |
Coast Guard | 21 CFR 177.1520(b) | FDA Publication | 0 | Mooney Viscosity | Food and Drug Administration, U.S. Department of Health and Human Services | |
National Highway Traffic Safety Administration | 49 CFR 572.143(a) | Drawing No. SA-572-S19 | 0 | Load-moment Transducer | Reprographic Technologies | |
Coast Guard | 46 CFR 120.410(d) | UL 595 | 1991 | Marine-Type Electric Lighting Fixtures | Underwriters Laboratories, Inc. | |
Coast Guard | 21 CFR 155.3(e) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 260.11(c)(3)(xi) | EPA Method 0040 | 1996 | Sampling of Principal Organic Hazardous Constituents from Combustion Sources Using Tedlar® Bags (and in Basic Manual Update III) | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.50(a) | FMVSS 121 | 1998 | Air Brake Systems | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 53.10-3(a) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section IV, Rules for Construction of Heating Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 8 | USGS Publication | 1979 | Methods for Determination of Inorganic Substances in Water and Fluvial Sediments, Techniques of Water-Resources Investigations of the U.S. Geological Survey, Book 5, Chapter A1 | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (8) | APHA Method 2540 D | 1997 | Solids, Total Suspended Solids Dried at 103-105 degrees C | American Public Health Association | |
Environmental Protection Agency | 40 CFR 98.334(b)(2)(i) | ASTM E 1941 | 2004 | Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(18) | ASTM A 226/A 226M | 1995 | Standard Specification for Electric Resistance-Welded Carbon Steel Boiler and Superheater Tubes for High-Pressure Service | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASTM B 88 | 1993 | Standard Specification for Seamless Copper Water Tube | ASTM International | |
Energy Department | 10 CFR 431.86(c)(3)(i) | HI BTS-2000 | 2001 | Method to Determine Efficiency of Commercial Space Heating Boilers | Hydronics Institute | |
Coast Guard | 46 CFR 160.151-7(b) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1060.801 Carbon Working Capacity | ASTM D 5228 | 2005 | Standard Test Method for Determination of Butane Working Capacity of Activated Carbon | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 1657 | 1993 | The Determination of Organo-Phosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 147.1050(a)(3) | MDUIC regulations | 1989 | Code of Maryland Regulations, Title 26, Subtitle 08, Chapter 02, promulgated and effective as of March 1, 1989 | State of Maryland | |
Environmental Protection Agency | 40 CFR 63, Subpart JJJJJJ, Table 5, (1)(d) | ASTM E 711 | 1987 | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Isopropyl acetate) | EPA Method 1666 | 1998 | Volatile Organic Compounds Specific to the Pharmaceutical Manufacturing Industry by Isotope Dilution Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | MSS SP-45 | 2003 | Bypass and Drain Connection Standard | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Research and Special Programs Administration | 49 CFR 195.428(c) | API RP 2350 | 1996 | Overfill Protection for Storage Tanks in Petroleum Facilities | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 108C, 6.1.4 | ASTM E 50 | 1986 | Standard Practice for Apparatus Reagents, and Safety Precautions for Chemical Analysis of Metals | ASTM International | |
Food and Drug Administration | 21 CFR 177.1650(c) | ASTM D 968 | 1981 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Falling Abrasive Tester | ASTM International | |
Public Health Service | 42 CFR 52b.12(c)(7)(iv) | NFPA 101 | 1997 | Life Safety Code | National Fire Protection Association | |
Research and Special Programs Administration | 49 CFR 178.337-16(b)(1) | ASME B&PV Code | 1992 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 136.3(a) Table ID (1) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 59.401 Quick dry enamel (2) | ASTM D 1640 | 1989 | Standard Test Method for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature | ASTM International |