Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Standards Incorporated by Reference (SIBR) Database
If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.
DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
| Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|---|
| Environmental Protection Agency | 40 CFR 58 Appendix C, 4.3 | EPA-600-4-90-0003 | 1989 | Quality Assurance Handbook for Air Pollution Measurement Systems: Volume IV. Meteorological Measurements | U.S. Environmental Protection Agency | |
| Occupational Safety and Health Administration | 29 CFR 1910.111(b)(2)(vi) | ASME B&PV Code | 1956 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
| Housing and Urban Development Department | 24 CFR 200.945(a)(1)(ii) | ASTM D 1335 | 1967 | Standard Test Method for Tuft Bind of Pile Floor Coverings | ASTM International | |
| Housing and Urban Development Department | 24 CFR 3280.703 | ASME B1.20.1 | 1983 | Pipe Threads, General Purpose (Inch) | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 55.14(e)(3)(i)(A) | 40 CFR part 52, subpart F | 2006 | State of California Requirements Applicable to OCS Sources | U.S. Environmental Protection Agency | |
| Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5335-1A | 1970 | Airport Design Standards--Airports Served by Air Carriers--Taxiways (1970, through change 2, 1976) | Federal Aviation Administration, U.S. Department of Transportation | |
| Coast Guard | 21 CFR 172.862(b)(2) | ASTM D 1240 | 1982 | Standard Method of Test for Rosin Acids in Fatty Acids | ASTM International | |
| Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(ii) | SAE J-394a | 1972 | Minimum Performance Criteria for Rollover Protective Structures for Wheeled Front-End Loaders and Wheeled Dozers | Society of Automotive Engineers | |
| Environmental Protection Agency | 40 CFR 75.6(a)(26) | ASTM D 3177 | 2002 | Standard Test Method for Total Sulfur in the Analysis Sample of Coal and Coke | ASTM International | |
| Coast Guard | 46 CFR 160.061-1(a)(2) | MIL-H-2846 | 1965 | Hooks, Fish, Steel | U.S. Department of Defense | |
| Coast Guard | 46 CFR 175.600(b) Table | UL 489 | 1995 | Molded-Case Circuit Breakers and Circuit Breaker Enclosures | Underwriters Laboratories, Inc. | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IB (36) | EPA Method 200.5 | 2003 | Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 4.2 | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (9) Chromium | APHA Method 3120 B | 1998 | Metals by Inductively Coupled Plasma | American Public Health Association | |
| Environmental Protection Agency | 40 CFR 82, Subpart B, Appendix A, Section (2) | ARI 700 | 1988 | Specifications for Fluorocarbon Refrigerants | Air Conditioning and Refrigeration Institute | |
| Coast Guard | 36 CFR 1235.4(d)(1) | ANSI X3.39 | 1986 | Recorded Magnetic Tape for Information Interchange (1600 CPI, PE) | American National Standards Institute | |
| Housing and Urban Development Department | 24 CFR 200.926d(d)(2) | HUD Handbook 4910.1 | 1994 | Minimum Property Standards for Housing | U.S. Department of Housing and Urban Development | |
| Energy Department | 10 CFR 430 Subpart B, App. D, 1.7 | AHAM HLD-1 | 1974 | AHAM Performance Evaluation Procedure for Household Tumble Type Clothes Dryers | Association of Home Appliance Manufacturers | |
| Coast Guard | 46 CFR 160.133-13(d)(2)(iii) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
| National Highway Traffic Safety Administration | 49 CFR 572.184(a) | Drawing No. 175-0000 | 2009 | ES-2re Dummy Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
| Environmental Protection Agency | 40 CFR 136.3(b)(5)(iii)(T) | EPA Method 410.3 | 1978 | Chemical Oxygen Demand - Titrimetric (high-level) | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 435.15 Note 6 | EPA Method 1644 | 2015 | Method for Conducting a Sediment Toxicity Test with Leptocheirus plumulosus and Non-Aqueous Drilling Fluids or Synthetic-Based Drilling Muds | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 63.7944(b)(2)(iv) | ASTM D 2879 | 1983 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
| Housing and Urban Development Department | 24 CFR 200.949(a)(1)(viii) | ISDSI 107 | 1980 | Thermal Performance Standard for Insulated Steel Door Systems | Insulated Steel Door Institute | |
| Research and Special Programs Administration | 49 CFR 180.407(g)(3) | CGA TB-2 | 1980 | Guidelines for Inspection and Repair of MC-330 and MC-331 Cargo Tanks | Compressed Gas Association | |
| Rural Utilities Service | 7 CFR 1728.202(a) | RUS Bulletin 1728F-700 | 1993 | RUS Specification for Wood Poles, Stubs and Anchor Logs | Rural Utilities Service, U.S. Department of Agriculture | |
| Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 6.1 | ASTM D 1475 | 1990 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
| Environmental Protection Agency | 40 CFR 147.1751(b)(4) | NDUIC regulations | 1983 | North Dakota Administrative Code Article 33-22 (Practice and Procedure) | State of North Dakota | |
| Rural Utilities Service | 7 CFR 1728.97(e)(9) | AWPA M3 | 2005 | Standard Quality Control Procedures for Wood Preserving Plants | American Wood Protection Association | |
| Energy Department | 10 CFR 431.66(d)(2)(iii) | ARI 1200 | 2006 | Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets | Air Conditioning and Refrigeration Institute | |
| Food and Drug Administration | 21 CFR 178.3770(d)(3) | ASTM D 1387 | 1978 | Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes | ASTM International | |
| Energy Department | 10 CFR 440 Appendix A | AAMA 1002.10 | 1983 | Voluntary Specifications for Aluminum Insulating Products for Windows and Sliding Glass Doors | American Architectural Manufacturers Association | |
| Coast Guard | 46 CFR 110.10-1(g)(24) | IEC 92-353 | 1995 | Electrical Installations in Ships—Part 353: Single and Multicore Non-Radial Field Power Cables with Extruded Solid Insulation for Rated Voltages 1kV and 3kV, Second Edition | International Electrotechnical Commission | |
| National Highway Traffic Safety Administration | 49 CFR 572.18(a) | Drawing No. SA 103C 030 | 1976 | Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table ID (56) | USGS O-1126-95 | 1995 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory - Determination of Pesticides in Water by C-18 SPE and Capillary-Column GC-MS with Select-Ion Monitoring | U.S. Geological Survey | |
| Consumer Product Safety Commission | 16 CFR 1616.2(b) | NIST PS 36 | 1970 | Body Measurements for Sizing Boys Apparel (formerly CS 155-50) | National Institute of Standards and Technology, U.S. Department of Commerce | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IB (4) | APHA Method 4500-NH3 G | 1997 | Ammonia by Automated Phenate | American Public Health Association | |
| Federal Communications Commission | 47 CFR 80.1101(b)(4) | IEC 60092-101 | 2002 | Electrical installations in ships--part 101: Definitions and general requirements, Edition 4.1 | International Electrotechnical Commission | |
| Drug Enforcement Administration | 21 CFR 1311.30(b) | FIPS Publication 140-2 | 2005 | Annex C to FIPS Publication 140-2, Security Requirements for Cryptographic Modules: Approved Random Number Generators | National Institute of Standards and Technology, U.S. Department of Commerce | |
| Energy Department | 10 CFR 431.293(b)(2) | ASHRAE 32.1 | 2004 | Methods of Testing for Rating Vending Machines for Bottled, Canned, and Other Sealed Beverages | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1926.1433(c)(2)(iii) | SAE J-987 | 2003 | Lattice Boom Cranes—Method of Test | Society of Automotive Engineers | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IC (63) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
| Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (chlorate) | EPA Method 300.1 | 1997 | Ion chromatography - anions, Revision 1.0 | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 60.485a(d)(1) | ASTM E 260 | 1973 | Standard Practice for Packed Column Gas Chromatography | ASTM International | |
| Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.200-7(d) | ASTM A 240/A 240M | 1999 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1926.605(a)(1) | 29 CFR part 1918 | 2014 | Safety and Health Regulations for Longshoring | Occupational Safety and Health Administration, U.S. Department of Labor | |
| Environmental Protection Agency | 40 CFR 98.7(e)(30) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
| Coast Guard | 21 CFR 177.1590(c) | ASTM D 968 | 1981 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Falling Abrasive Tester | ASTM International | |
| Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (18) Nitrate | EPA Method 300.1 | 2000 | Ion chromatography - anions, Revision 1.0 | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 60, Appendix B, PS-1, 16.0(6) | EPA-600-8-87-025 | 1987 | Technical Assistance Document: Performance Audit Procedures for Opacity Monitors | U.S. Environmental Protection Agency | |
| Occupational Safety and Health Administration | 29 CFR 1910.261(f)(5) | ANSI Z87.1 | 1968 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute |