This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation Sort descending | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Energy Department | 10 CFR 434.701.1 RS-42 | ANSI Z21.66 | 1996 | Automatic Vent Damper Devices for Use with Gas-Fired Appliances (RS-42) | American National Standards Institute | |
Energy Department | 10 CFR 434.701.1 RS-43 | NEMA MG-10 | 1994 | Energy Management Guide for Selection and Use of Polyphase Motors (RS-43) | National Electrical Manufacturers Association | |
Energy Department | 10 CFR 434.701.1 RS-44 | NEMA MG-11 | 1993 | Energy Management Guide for Selection and Use of Single-Phase Motors (RS-44) | National Electrical Manufacturers Association | |
Energy Department | 10 CFR 434.701.1 RS-45 | ARI 330 | 1993 | Ground-Source Closed-Loop Heat Pumps (RS-45) | Air Conditioning and Refrigeration Institute | |
Energy Department | 10 CFR 434.701.1 RS-46 | ARI 560 | 1992 | Absorption Water-Chilling and Water Heating Packages (RS-46) | Air Conditioning and Refrigeration Institute | |
Energy Department | 10 CFR 434.701.1 RS-47 | ASHRAE Handbook | 1995 | HVAC Systems and Applications (RS-47) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Energy Department | 10 CFR 434.701.1 RS-5 | ASTM C 177 | 1993 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (RS-5) | ASTM International | |
Energy Department | 10 CFR 434.701.1 RS-6 | ASTM C 518 | 1991 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus (RS-6) | ASTM International | |
Energy Department | 10 CFR 434.701.1 RS-7 | ASTM C 236 | 1993 | Standard Test Method for Steady-State Thermal Performance of Building Assemblies by Means of a Guarded Hot Box | ASTM International | |
Energy Department | 10 CFR 434.701.1 RS-8 | ASTM C 976 | 1990 | Standard Test Method for Thermal Performance of Building Assemblies by Means of a Calibrated Hot Box (RS-8) | ASTM International | |
Energy Department | 10 CFR 434.701.1 RS-9 | LTH Report TVAHB-3007 | 1981 | Thermal Bridges in Sheet Metal Construction (RS-9) | Lund Institute of Technology | |
Energy Department | 87 FR 19595 | 10 CFR 435 | ICC 2021 | 2021 | Energy Efficiency Standards for the Design and Construction of New Federal Low-Rise Residential Buildings Baseline Standards Update | International Energy Conservation Council |
Energy Department | 10 CFR 435.2 | ICC International Energy Conservation Code | 2004 | IECC Baseline Building 2004 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.2 | ICC International Energy Conservation Code | 2009 | IECC Baseline Building 2009 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.3(b)(1) | ICC International Energy Conservation Code | 2004 | IECC Baseline Building 2004 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.3(b)(2) | ICC International Energy Conservation Code | 2009 | IECC Baseline Building 2009 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.4(a)(1)(i) | ICC International Energy Conservation Code | 2004 | IECC Baseline Building 2004 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.4(a)(1)(ii) | ICC International Energy Conservation Code | 2004 | IECC Baseline Building 2004 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.4(a)(2)(i) | ICC International Energy Conservation Code | 2009 | IECC Baseline Building 2009 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.4(a)(2)(ii) | ICC International Energy Conservation Code | 2009 | IECC Baseline Building 2009 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.5(a) | ICC International Energy Conservation Code | 2004 | IECC Baseline Building 2004 | International Energy Conservation Council | |
Energy Department | 10 CFR 435.5(b) | ICC International Energy Conservation Code | 2009 | IECC Baseline Building 2009 | International Energy Conservation Council | |
Energy Department | 10 CFR 440 Appendix A | ARI 470 | 1987 | Desuperheater/Water Heaters | Air Conditioning and Refrigeration Institute | |
Energy Department | 10 CFR 440 Appendix A | NFPA 70 | 1993 | National Electrical Code | National Fire Protection Association | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 553 | 1977 | Blanket and Felt Mineral Fiber Insulation (Industrial Type) | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 612 | 1983 | Block and Board Insulation | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | FedSpec TT-S-230C | 1970 | Sealing Compound, Elastomeric Type, Single-Component (for Caulking, Sealing and Glazing in Buildings and Other Structures) | Federal Specifications Standards and Test Methods | |
Energy Department | 10 CFR 440 Appendix A | AAMA 1102.7 | 1989 | Voluntary Specifications for Aluminum Storm Doors | American Architectural Manufacturers Association | |
Energy Department | 10 CFR 440 Appendix A | NFPA 211 | 1988 | Standard for Chimneys, Fireplaces and Vents | National Fire Protection Association | |
Energy Department | 10 CFR 440 Appendix A | ASME B&PV Code | 1988 | Boiler and Pressure Vessel Code, Section IX | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 547 | 1977 | Insulation, Thermal (Mineral Fiber for Preformed Pipe) | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 570 | 1989 | Oil and Resin Based Caulking Compound for Building Construction | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 984 | 1993 | Perlite Board and Rigid Cellular Polyurethane Composite Roof Insulation | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 764 | 1988 | Insulation, Loose-Fill Mineral Fiber | ASTM International | |
Coast Guard | 10 CFR 440 Appendix A | ARI 210/240 | 1989 | Unitary Air-Conditioning and Air-Source Heat Pump Equipment | Air Conditioning and Refrigeration Institute | |
Energy Department | 10 CFR 440 Appendix A | FedSpec TT-S-1657 | 1970 | Sealing Compound, Single Component Butyl Rubber Base, Solvent Release Type (for Buildings and Other Types of Construction) | Federal Specifications Standards and Test Methods | |
Energy Department | 10 CFR 440 Appendix A | FedSpec HH-I-1972/2 | 1985 | Polyurethane or Polyisocyanurate Insulation Board Faced with Felt on Both Sides | Federal Specifications Standards and Test Methods | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 578 | 1987 | Insulation, Thermal (Organic Cellular for Preformed Block- type Polystyrene) | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | SMACCNA Publication | 1978 | Energy Recovery Equipment and Systems, Air-to-Air | Sheet Metal and Air Conditioning Contractors' National Association | |
Energy Department | 10 CFR 440 Appendix A | ASME B&PV Code | 1988 | Boiler and Pressure Vessel Code, Section X | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 592 | 1980 | Blanket Insulation and Blanket Type Pipe Insulation (Metal-mesh Covered) (Industrial Type) | ASTM International | |
Research and Special Programs Administration | 10 CFR 440 Appendix A | ASME B&PV Code | 1992 | Boiler and Pressure Vessel Code, Section II | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 578 | 1987 | Insulation, Thermal (Organic Cellular for Preformed Block- type Polystyrene) | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | UL 17 | 1988 | Stack and Damper, Oil-fueled | Underwriters Laboratories, Inc. | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 570 | 1989 | Standard Specification for Oil and Resin Based Caulking Compound for Building Construction | ASTM International | |
Energy Department | 10 CFR 440 Appendix A | FedSpec TT-P-791B | 1971 | Putty | Federal Specifications Standards and Test Methods | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 669 | 1989 | Glazing Compounds for Metal Sash | ASTM International | |
Research and Special Programs Administration | 10 CFR 440 Appendix A | ASME B&PV Code | 1992 | Boiler and Pressure Vessel Code, Section IX | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 440 Appendix A | NFPA 58 | 1989 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Energy Department | 10 CFR 440 Appendix A | UL 17 | 1988 | Stack and Damper, Oil-fueled | Underwriters Laboratories, Inc. |