This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (48) | ASTM D 5812 | 2002 | Standard Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | DOE HASL-300 | 1997 | DOE EML Procedures Manual | U.S. Department of Energy | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 9.2.1 | EPA Method 6020 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 49 CFR 572.141 Table A | Drawing No. 210-1000 | 2001 | Head Assembly | Reprographic Technologies | |
National Oceanic and Atmospheric Administration | 21 CFR 177.1360(b) | ASTM F 34 | 1980 | Standard Test Method for Liquid Extraction of Flexible Barrier Materials | ASTM International | |
Rural Utilities Service | 7 CFR 1755.506(a) | 7 CFR 1755.700 | 2012 | Aerial service wires | Rural Utilities Service, U.S. Department of Agriculture | |
Nuclear Regulatory Commission | 10 CFR 50.55a(g)(3)(i) | ASME B&PV Code | 2004 | Boiler and Pressure Vessel Code, Section XI | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.407(b)(2) Note | NFPA 70 | 2019 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (54) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 56.01-2(e)(56) | ASTM B 161 | 1993 | Standard Specification for Nickel Seamless Pipe and Tube | ASTM International | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 105.2.4 | ICC/IBC | 2001 | International Building Code | International Code Council | |
Coast Guard | 24 CFR 200.925c(a)(2) | NFPA 70 | 1993 | National Electrical Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (15) Magnesium | APHA Method 3500-Mg E | 1992 | Magnesium | American Public Health Association | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ACI 318 | 1992 | Building Code Requirements for Reinforced Concrete, plus Commentary on Building Code Requirements for Reinforced Concrete | American Concrete Institute | |
Minerals Management Service | 30 CFR 250.1629(b)(1)(i) | ANSI/ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 113.10-7 | IEC 60529 | 2001 | Degrees of Protection Provided by Enclosures (IP Code), Edition 2.1 | International Electrotechnical Commission | |
Securities and Exchange Commission | 17 CFR 232.301 | EDGAR Filer Manual | 2009 | Guide for Electronic Filing with the U.S. Securities and Exchange Commission, EDGAR Filer Manual, Volume II | Securities and Exchange Commission | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (3) | APHA Method 3120 B | 1999 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Environmental Protection Agency | 40 CFR 86.1(g)(18) | SAE J-1978 | 2002 | OBD II Scan Tool—Equivalent to ISO/DIS 15031-4 | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.202 S5.1(a)(3) | SAE J-826 | 1995 | Devices for Use in Defining and Measuring Vehicle Seating | Society of Automotive Engineers | |
Coast Guard | 40 CFR 60, Appendix B, PS-1, 8.2(1) | ASTM D 6216 | 1998 | Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications | ASTM International | |
Environmental Protection Agency | 40 CFR 260.11(c)(3)(vii) | EPA Method 1312 | 1994 | Synthetic Precipitation Leaching Procedure (and in Basic Manual Update III) | U.S. Environmental Protection Agency | |
Federal Motor Carrier Safety Administration | 49 CFR 393.24(d) | SAE J-583 | 2004 | Front Fog Lamp | Society of Automotive Engineers | |
Coast Guard | 46 CFR 53.01-1(c)(2) | UL 1453 | 1995 | Standard for Electric Booster and Commercial Storage Tank Water Heaters, Fourth Edition | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (44) | Waters Method D6508, Revision 2 | 2000 | Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte | Waters Corp. | |
Environmental Protection Agency | 40 CFR 147.2200(b)(2)(ii) | TXUIC regulations | 2014 | Vernon's Texas Codes Annotated, Natural Resources Code, Chapters 91, 2001, and 331 | State of Texas | |
Environmental Protection Agency | 40 CFR 63.457(b)(5)(i)(B) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Research and Special Programs Administration | 49 CFR 178.65(c)(4) | CGA C-3 | 1994 | Standard for Welding and Brazing on Thinned Walled Containers | Compressed Gas Association | |
Coast Guard | 46 CFR 38.25-3(c)(2) | ASNT RP SNT-TC-1A | 1988 | Personnel Qualification and Certification for Nondestructive Testing | American Society for Nondestructive Testing | |
Environmental Protection Agency | 40 CFR 63.3941(b)(1) | ASTM D 6093 | 1997 | Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer | ASTM International | |
Energy Department | 10 CFR 431.105(d)(2)(ii) | ASTM C 177 | 1997 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus | ASTM International | |
Coast Guard | 46 CFR 160.151-21(i) | ISO 18813:2006(E) | 2006 | Ships and marine technology—Survival equipment for survival craft and rescue boats, First Edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 1045.110(g) | SAE J-1939 | 2008 | Marine Stern Drive and Inboard Spark-Ignition Engine On-Board Diagnostics Implementation Guide | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 631 | 1993 | The Determination of Benomyl and Carbendazim in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.204(b)(3)(ii) | AOAC Method 9 | 1970 | Official Methods of Analysis, 11th Edition | AOAC International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(1)(i) | EPA-600-4-79-020 | 1983 | Method 204.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 200.946(a)(1)(xiii) | EIMA Test Method 101.03 | 1995 | Standard Test Method for Determining the Tensile Adhesion Strength of an Exterior Insulation and Finish System (EIFS), Class PB (modified ASTM C297-91) | Exterior Insulation Manufacturers Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (Ethanol) | ASTM D 3695 | 1995 | Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. Q, 1.17 | ANSI C82.2 | 2002 | Fluorescent Lamp Ballasts--Methods of Measurement | American National Standards Institute | |
Coast Guard | 46 CFR 63.05-1(f)(1) | ISO 9096 | 2003 | Stationary source emissions—Manual determination of mass concentration of particulate matter, Second edition | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 61, Appendix D, Reference 2 | NRC Guide 3.59 | 1987 | Methods for Estimating Radioactive and Toxic Airborne Source Terms for Uranium Milling Operations | U.S. Nuclear Regulatory Commission | |
Coast Guard | 46 CFR 160.043-2(a) | DWG. No. 160.043-1(b) | 2012 | Jackknife (With Can Opener) | U.S. Coast Guard | |
Rural Utilities Service | 7 CFR 1755.902(d)(2) | ICEA S-87-640 | 2006 | Standard for Optical Fiber Outside Plant Communications Cable, 4th edition | Insulated Cable Engineers Association | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(4)(vi) | NFPA 10 | 2002 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Coast Guard | 46 CFR 121.240(c)(3) | ABYC A-1 | 1993 | Marine Liquified Petroleum Gas (LPG) Systems | American Boat and Yacht Council | |
National Highway Traffic Safety Administration | 49 CFR 572.77(c)(1) | Drawing No. SA 106C 001 | 1997 | Specifications for an Anthropomorphic Test Dummy Representing a 6-year-old Child, sheet 1 | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | EPA-600-R-93-100 | 1993 | Methods for Determination of Inorganic Substances in Environmental Samples | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.251(d)(1) Coal | ASTM D 388 | 2004 | Standard Classification of Coals by Rank | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.852(e)(4) | ANSI/API Spec. 17J | 2008 | Specification for Unbonded Flexible Pipe | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 89.416(a) | SAE J-244 | 1983 | Recommended Practice for Measurement of Intake Air or Exhaust Gas Flow of Diesel Engines | Society of Automotive Engineers |