This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(4) | SAE J-319b | 1971 | Minimum Performance Criteria for Brake Systems for Off-Highway Rubber-Tired Self-Propelled Scrapers | Society of Automotive Engineers | |
Coast Guard | 46 CFR 175.600(b) Table | NFPA 302 | 1994 | Fire Protection Standard for Pleasure and Commercial Motor Craft | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 141.21(f)(3) Note 1 | APHA Method 9223 | 1997 | Enzyme Substrate Coliform Test | American Public Health Association | |
Food and Drug Administration | 21 CFR 172.380(b) | Food Chemicals Codex | 2004 | Vitamin D3 | National Academy Press | |
Coast Guard | 46 CFR 160.135-11(c)(2)(i)(B) | ISO 1172:1996(E) | 1996 | Textile-glass-reinforced plastics—Prepregs, moulding compounds and laminates—Determination of the textile-glass and mineral-filler content—Calcination methods, Second Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 111.105-31(e) | IEC 60092-502 | 1999 | Electrical Installation in Ships, Part 502: Tankers—Special Features | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (20) | ASTM D 4190 | 2008 | Metals by Direct Current Plasma | ASTM International | |
Research and Special Programs Administration | 49 CFR 192.191(a) | ASTM D 2517 | 2000 | Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Terbufos) | EPA Method 614.1 | 1993 | The Determination of Organophosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 795.70(f)(14) | EPA-560-6-84-003 | 1984 | Chemical fate test guidelines. Test guideline (CG, CS-6000). Photolysis in aqueous solution. | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.164(b)(5)(iv) | ASTM D 2234/D 2234M | 2007 | Standard Practice for Collection of a Gross Sample of Coal | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.172(a) | Drawing No. 420-383X | 2011 | Structural replacement | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 261.1063(h) | ASTM D 2879 | 1986 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Environmental Protection Agency | 40 CFR 63.11980(a)(2)(iii) | EPA SW-846-8315A | 1996 | Determination of Carbonyl Compounds by High Performance Liquid Chromatography (HPLC), Revision 1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (2) | USGS I-1472-85 | 1985 | Metals by Atomic Absorption or ICP | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 435.13 Note 8 | EPA Method 1644 | 2015 | Method for Conducting a Sediment Toxicity Test with Leptocheirus plumulosus and Non-Aqueous Drilling Fluids or Synthetic-Based Drilling Muds | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 77 | 2000 | Recommended Practice on Static Electricity | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1915.5(d)(1)(viii) | ANSI Z87.1 | 1989 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Coast Guard | 46 CFR 114.600(b) | NFPA 302 | 1994 | Pleasure and Commercial Motor Craft, Chapter 6 | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 2.1 | ANSI/HPS N13.1 | 1999 | Guide to Sampling Airborne Radioactive Materials in Nuclear Facilities | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 300.915(b)(8) | ASTM D 97 | 1987 | Standard Test Method for Pour Point of Petroleum Oils | ASTM International | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-995a | 1969 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
Research and Special Programs Administration | 49 CFR 172.102(c)(1) 57 | UN Publication | 2003 | UN Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria | United Nations | |
Rural Utilities Service | 7 CFR 1755.703(g)(5)(i) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Food and Drug Administration | 21 CFR 178.3690(b)(4) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ASME A112.18.7 | 1999 | Deck Mounted Bath/Shower Transfer Valves with Integral Backflow Protection | American Society of Agricultural Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(30) | ASTM E 274 | 1970 | Standard Method of Test for Skid Resistance of Paved Surfaces Using a Full-Scale Tire | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(F)(4) | EPA Method 524.1 | 1989 | Measurement of Purgeable Organic Compounds in Water by Packed Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (33) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 154, Appendix B, 3.3.1 | ASME B&PV Code | 2005 | Section VIII, Division 1, Pressure Vessels | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 141.402(c)(2) Table Note 7 | APHA Method 9221 F | 1998 | Multiple-Tube Fermentation Technique for Members of the Coliform Group (20th Edition), Escherichia coli Procedure | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63.14(l)(20) | EPA-821-R-02-019 | 2002 | Method 1631, Mercury in Water by Oxidation, Purge and Trap, and Cold Vapor Atomic Absorption Fluorescence Spectrometry, Revision E | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.6(v)(1) | FedSpec QQ-P-416 | 1991 | Federal Specification Plating Cadmium (Electrodeposited) | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (33) | APHA Method 6440 B | 2000 | Polynuclear Aromatic Hydrocarbons by Micro Liquid-Liquid Extraction Chromatographic Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (trans-Dichloroethylene) | EPA Method 502.2 | 1995 | Volatile Organic Compounds (Drinking Water) by GC/PID/ELCD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.45(f)(4)(ii) | ASTM D 388 | 1998 | Standard Classification of Coals by Rank | ASTM International | |
Federal Communications Commission | 47 CFR 15.31(a)(3) | ANSI C63.10-2013 | 2013 | American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices | American National Standards Institute | |
Food and Drug Administration | 21 CFR 172.250(b)(3) Procedure, Determination of boiling-point range | ASTM D 86 | 1982 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Environmental Protection Agency | 40 CFR 60.335(b)(10)(i) | ASTM D 129 | 2000 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Coast Guard | 46 CFR 56.01-2(b)(2) | ANSI/ASME B1.20.1 | 1983 | Pipe Threads, General Purpose (Inch) | American National Standards Institute | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 105.2.4 | ICC/IBC | 2001 | International Building Code | International Code Council | |
National Highway Traffic Safety Administration | 49 CFR 571.106 S12.7(b) | ASTM D 4329 | 1999 | Standard Practice for Fluorescent UV Exposure of Plastics | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 434.403.1 Table 403.1e | ANSI Z21.47 | 1993 | Gas-Fired Central Furnaces (RS-21) | American Gas Association | |
Rural Utilities Service | 7 CFR 1755.506(a) | 7 CFR 1755.701 | 1989 | Scope | Rural Utilities Service, U.S. Department of Agriculture | |
National Highway Traffic Safety Administration | 49 CFR 572.161 Table A | Drawing No. 167–3010 | 2009 | Lumbar Weight Base, Revision A | Leet-Melbrook | |
Coast Guard | 45 CFR 162.920(c)(1)(v) | CAQH Publication | 2011 | Phase I CORE 156: Eligibility and Benefits Real Time Response Time Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Minerals Management Service | 30 CFR 250.1629(b)(2) | API RP 14C | 2007 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.20 | Drawing No. SA 103C 041 | 1976 | Upper Arm Assembly, Left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Research and Special Programs Administration | 49 CFR 195.106(e) | ASTM A 691 | 2002 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperature | ASTM International |