DISCLAIMER: Data and information released from the Standards Incorporated by Reference databases at NIST are provided on an "AS IS" basis, without representation or warranty of any kind, including without limitation the warranties of merchantability, fitness for a particular purpose and non-infringement. Data and/or information in this database may contain errors or may be incomplete. Please email standardsinfo@nist.gov if you identified missing information or incorrect information. This database is provided by NIST as a public service. Inclusion of records in this database does not represent endorsement or recommendation of standards listed by NIST.
NOTE: This database does not included records related to the Incorporation by Reference for the following: Department of Transportation, Federal Aviation Administration – Airworthiness Directives, State Air Plan Approvals, and Standard Instrumentation Approach Procedures; and the Environmental Protection Agency - State Approval of Air Quality Plans.
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 199.70(d) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | AA ASM 35 | 1980 | Aluminum Sheet Metal Work in Building Construction | Aluminum Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(122) | ASTM D 3177 | 1989 | Standard Test Method for Total Sulfur in the Analysis Sample of Coal and Coke | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.71(b) Table A | Drawing No. SA 106C 060 | 0 | Pelvis Assembly, Revision A | Reprographic Technologies | |
Coast Guard | 46 CFR 56.01-2(d)(12) | ASME B16.18 | 2001 | Cast Copper Alloy Solder Joint Pressure Fittings | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 172.860(c)(3) | AOAC Journal | 1968 | Journal of the Association of the Offical Analytical Chemists, Volume 51 (No. 2), pages 489-490 | AOAC International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(62) | API RP 14J | 2007 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(7)(ii) | EPA-600-4-79-020 | 1983 | Method 335.2 Tritrimetric: Spectrophotometric | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 162.050-20(a)(1) | ISO 8217 | 2005 | Petroleum products—Fuels (class F)—Specifications of marine fuels | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (16) | APHA Method 4110 B | 2000 | Anions by Ion Chromatography with Chemical Suppression of Eluent | American Public Health Association | |
Environmental Protection Agency | 40 CFR 143.4(b) Table Note 1 | EPA-600-R-93-100 | 1993 | Methods for the Determination of Inorganic Substances in Environmental Samples | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(e) | ASTM E 871 | 2006 | Standard Method of Moisture Analysis of Particulate Wood Fuels | ASTM International | |
Food and Drug Administration | 21 CFR 106.30(c)(2) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 60.1810(a)(4) | ASME Interim Supplement 19.5 | 1971 | Instruments and Apparatus: Application, part II of Fluid Meters, 6th Edition, chapter 4 | American Society of Mechanical Engineers | |
Food and Drug Administration | 21 CFR 184.1979b(b)(2) | Food Chemicals Codex | 1996 | Reduced Minerals Whey | National Academy Press | |
Energy Department | 10 CFR 430 Subpart B, App. M, 2.6, a | ASHRAE 41.2 | 1992 | Standard Methods for Laboratory Airflow Measurement | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.153(c)(2) | Drawing No. ATD 6206 | 0 | Neck cable | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Endothall) | EPA Method 548.1 | 1992 | Endothall by Ion Exchange, Methylation, GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60 Subpart IIII, Table 7(1)(a)(iv) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1915.155(b)(1)(iii) | ANSI Z89.1 | 1997 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Energy Department | 10 CFR 433.2 | ANSI/ASHRAE/IESNA Standard 90.1-2010 | Energy Standard for Buildings Except Low-Rise Residential Buildings | American Society of Heating, Refrigerating and Air Conditioning Engineers | ||
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 58 | 2004 | Liquefied Petroleum Gas Code | National Fire Protection Association | |
Housing and Urban Development Department | 24 CFR 3282.12(b)(3)(i)(A)(2) | BOCA Basic Industrialized Dwelling Code | 0 | BOCA Basic Industrialized Dwelling Code | Building Officials and Code Administrators International | |
Coast Guard | 33 CFR 126.5(b) | NFPA 10 | 1988 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.1 | ANSI Z26.1a | 1980 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D 1693 | 1988 | Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics | ASTM International | |
Coast Guard | 46 CFR 160.055-3(c) | Federal Standard 191 | 0 | Textile Test Method 5660 | Federal Specifications Standards and Test Methods | |
Minerals Management Service | 30 CFR 250.1202(a)(2)(iv) | API MPMS | 0 | Chapter 11, Section 1 | American Petroleum Institute | |
Housing and Urban Development Department | 24 CFR 200.949(a)(1)(iii) | ISDSI 101 | 1989 | Air Infiltration Performance Standard for Insulated Steel Door Systems | Insulated Steel Door Institute | |
Research and Special Programs Administration | 49 CFR 179.200-15(c) | ASTM A 47 | 1968 | Standard Specification for Malleable Iron Castings | ASTM International | |
Rural Utilities Service | 7 CFR 1755.390(i)(5)(iv) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Energy Department | 10 CFR 434.402.2.1 Table 434.402.2.1 | ASTM E 283 | 1991 | Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen (RS-10) | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. C, 2.6.3.2(B) | AHAM DW-1 | 1992 | Household Electric Dishwashers | Association of Home Appliance Manufacturers | |
Food and Drug Administration | 21 CFR 573.640(b)(4)(i) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Federal Railroad Administration | 49 CFR 238 Appendix B Note 17 | ASTM E 119 | 2000 | Standard Test Methods for Fire Tests of Building Construction and Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (26) | EPA Method 608.2 | 1993 | The Determination of Certain Organochlorine Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (2) Antimony | APHA Method 3113 B | 1992 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 799.9430(h)(1) | EPA-50-6-89-002 | 0 | Summary of the EPA Workshop on Carcinogenesis Bioassay via the Dermal Route | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (20) | APHA Method 6200 C | 1997 | Volatile Aromatic Organic Compounds by GC/PID Purge & Trap | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(67) | ASTM D 1835 | 1987 | Standard Specification for Liquefied Petroleum (LP) Gases | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1918.104(b)(2) | ASTM F 2413 | 2005 | Standard Specification for Performance Requirements for Protective Footwear | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (24) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH (8) | EPA Method 1622 | 2005 | Cryptosporidium in Water by Filtration/IMS/FA | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 430, Appendix A, Method 1650 (16.12) | EPA-600-4-79-020 | 1979 | Methods 330.4 and 330.5 for Total Residual Chlorine | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.47(k)(4) | ASTM D 6708 | 0 | Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material | ASTM International | |
Environmental Protection Agency | 40 CFR 63.2450(j)(2)(iii) | ASTM D 6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 63.606(c)(3)(ii)(B) | AFPC Book of Methods | 1991 | Section IX, Methods of Analysis for Phosphate Rock, No. 3 Phosphorus—P2O5 or Ca3(PO4)2, Method A—Volumetric Method | Association of Florida Phosphate Chemists | |
Mine Safety and Health Administration | 30 CFR 56.14130(h) | SAE J-1194 | 1989 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.261(a)(3)(iii) | ANSI A17.1d | 1970 | Safety Code for Elevators, Dumbwaiters, and Moving Walks | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.3(b), H point | SAE J-1100 | 2001 | Motor Vehicle Dimensions | Society of Automotive Engineers |