This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (70) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41c Distillate oil | ASTM D 975 | 1996 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Defense Department | 32 CFR 2002.14(c)(4) | NIST SP 800-53 | 2013 | Security and Privacy Controls for Federal Information Systems and Organizations | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (12) | AOAC Method 993.14 | 1998 | Cadmium-Total, mg/L | AOAC International | |
Food and Drug Administration | 21 CFR 184.1979a(b)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI Z124.9 | 1994 | Plastic Urinal Fixtures | American National Standards Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(34) | API MPMS | 1980 | Chapter 11.1, Volume 1, Table 6A—Generalized Crude Oils and JP-4 Correction of Volume to 60 °F Against API Gravity at 60 °F, API Standard 2540 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (80) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) | ITS Method D99-003 | 2003 | Free Chlorine Species (HOCl? and OCl?) by Test Strip, Revision 3.0 | Industrial Test Systems, Inc. | |
Coast Guard | 46 CFR 160.002-1(a)(1) | MIL-W-530 | 1988 | Webbing, Textile, Cotton, General Purpose, Natural and In Colors | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (6) | APHA Method 6200 C | 1997 | Volatile Aromatic Organic Compounds by GC/PID Purge & Trap | American Public Health Association | |
Food and Drug Administration | 21 CFR 146.114(a)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (20) Ortho-phosphate | EPA Method 300.0 | 1993 | Ion chromatography - anions, Revision 2.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 89, Subpart D, Appendix A, Table 4 | ASTM D 2622 | 1998 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Coast Guard | 46 CFR 160.076-31(c)(6) | UL 1180 | 2009 | Fully Inflatable Recreational Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Energy Department | 10 CFR 430 Subpart B, App. M, 3, 3.1.1 | ASHRAE 37 | 2005 | Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.171-3(b) | ASTM D 1004 | 1994 | Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5085(j) Table 3, C1 | ASTM E 1193 | 1997 | Standard Guide for Conducting Daphnia Magna Life-Cycle Toxicity Tests | ASTM International | |
Environmental Protection Agency | 40 CFR 98.244(b)(4)(v) | ASTM D 3176 | 2002 | Standard Practice for Ultimate Analysis of Coal and Coke | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(78) | ASTM F 1199 | 2010 | Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150 Degrees F Maximum) | ASTM International | |
Rural Utilities Service | 7 CFR 1755.910(a)(7) | ASTM D 2247 | 1992 | Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity | ASTM International | |
Minerals Management Service | 30 CFR 250.1202(g)(3) | API MPMS | 2013 | Chapter 12, Section 2, Part 3 | American Petroleum Institute | |
Coast Guard | 36 CFR 1237.3(e)(3) | ISO 18925 | 2002 | Imaging Materials--Optical Disc Media--Storage | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1910.110(e)(3)(i), Table H-32 | ASME B&PV Code | 1959 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(60) | ANSI Z41 | 1999 | Protective Footwear | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.209 S5.1(e) | ASTM G 23 | 1981 | Standard Practice for Operating Light Exposure Apparatus (Carbon Arc Type) With and Without Water for Exposure of Nonmetallic Materials | ASTM International | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.3 | 1998 | Malleable Iron Threaded Fittings, Classes 150 and 300 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (59) | APHA Method 3125 B | 2009 | Inductively Coupled Plasma/Mass Spectrometric Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 266.106(h) | EPA-450-4-88-010 | 1992 | Screening Procedures for Estimating the Air Quality Impact of Stationary Sources | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.1001 Note to In Light Liquid Service | ASTM D 2879 | 1996 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IG (Triadimefon) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 61.355(c)(3)(iv)(A) | EPA Method 8020 | 1987 | Aromatic Volatile Organics | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.390(i)(10) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Coast Guard | 21 CFR 131.160(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 33 CFR 183.5(b) | NFPA 70 | 1987 | National Electrical Code—Articles 310 & 400 | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 1051.501(d)(1) | 40 CFR 1065, Subpart H | 2012 | Engine Fluids, Test Fuels, Analytical Gases and Other Calibration Standards | U.S. Environmental Protection Agency | |
Coast Guard | 33 CFR 127.201(c)(2) | NFPA 59A | 1994 | Standard for the Production, Storage and Handling of Liquefied Natural Gas (LNG) | National Fire Protection Association | |
Coast Guard | 46 CFR 160.151-57(b)(1) | IMO Revised recommendation on testing | 2010 | Life-Saving Appliances, including LSA Code, Revised recommendation on testing of live-saving appliances | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1066.310(b)(7)(i) | SAE J-2263 | 2008 | Road Load Measurement Using Onboard Anemometry and Coastdown Techniques | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(b)(10)(xvii) | APHA Method 3112 | 2009 | Metals by Cold-Vapor Atomic Absorption Spectrometry | American Public Health Association | |
National Highway Traffic Safety Administration | 49 CFR 571.205(a) S5.1.2.3 | ANSI Z26.1a | 1980 | Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways | American National Standards Institute | |
Energy Department | 10 CFR 430.2, Definitions, ER incandescent reflector lamp (1) | ANSI C79.1 | 1994 | Nomenclature for Glass Bulbs Intended for Use with Electric Lamps | American National Standards Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.945(a) | ASME B31.8S | 2004 | Managing System Integrity of Gas Pipelines | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Alachlor) | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 179.102-4(a)(2) | ASTM A 537/A 537M | 1991 | Standard for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 4(a) | ASTM D 6323 | 1998 | Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(8) | API MPMS | 2005 | Chapter 3, Section 1A | American Petroleum Institute | |
Coast Guard | 46 CFR 134.140(a)(2) | ABS Publication | 1994 | Rules for Building and Classing Mobile Offshore Drilling Units | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 572.125(a) | Drawing No. 910420-048 | 1994 | Mounting plate insert | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 60.58b(c)(2) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus] | American Society of Mechanical Engineers |