This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 58 Appendix E, 12.0(32) | EPA-600-4-90-0003 | 1989 | Quality Assurance Handbook for Air Pollution Measurement Systems: Volume IV. Meteorological Measurements. | U.S. Environmental Protection Agency | |
Food and Drug Administration | 21 CFR 177.2490(a) | FDA Publication | 1989 | Analysis for Dicholorbenzene in Ryton Polyphenylene Sulfide | Food and Drug Administration, U.S. Department of Health and Human Services | |
Housing and Urban Development Department | 30 CFR 56.14130(j) | SAE J-386 | 1997 | Operator Restraint Systems for Off-Road Work Machines | Society of Automotive Engineers | |
Federal Railroad Administration | 49 CFR 235.12(b) | AAR Publication | 2013 | Graphic Symbols | Association of American Railroads | |
Consumer Product Safety Commission | 16 CFR 1201.7(b)(1) | ANSI Z97.1 | 1972 | Performance Specifications and Methods of Test for Safety Glazing Material Used in Buildings | American National Standards Institute | |
Public Health Service | 42 CFR 84.81(d) | ANSI B57.1 | 1965 | Compressed Gas Cylinder Valve Outlet and Inlet Connections | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 178.338-1(c) | ASME B&PV Code | 1992 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.860(a)(6) | ASTM D 1535 | 1989 | Specifying Color by the Munsell System | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.338-19(a)(1) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-24 | 1975 | Runway and Taxiway Edge Lighting System | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 169.115(c)(1) | ABYC A-22 | 1978 | Marine Compressed Natural Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 182.500(b) | ISO 8849 | 1990 | Small Craft-Electrically Operated Bilge Pumps | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (39) | APHA Method 4500-NO3 H | 2000 | Nitrate Nitrogen by Selective Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (12) Cyanide | ASTM D 2036B | 1998 | Standard Test Methods for Cyanides in Water, Cyanides Amenable to Chlorination by Difference | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IB (2) | APHA Method 2320 B | 1997 | Alkalinity by Titration Method | American Public Health Association | |
Coast Guard | 46 CFR 111.60-3(a)(3) | IEC 92-353 | 1995 | Electrical Installations in Ships—Part 353: Single and Multicore Non-Radial Field Power Cables with Extruded Solid Insulation for Rated Voltages 1kV and 3kV, Second Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 172.015(a)(2) | IMO Resolution A.264(VIII) | 1960 | Amendment to Chapter VI of the International Convention for the Safety of Life at Sea | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 75.6(a)(41) | ASTM D 5373 | 2002 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. N, 10.2.3.1 | ASHRAE 103 | 1993 | Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 160.135-7(a)(1) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code, pages 7-71 | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1036.810(b)(1) | ASTM D 240 | 2009 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA Footnote 18 | Quanti-Tray® Method | 2002 | Quanti-Tray® Method | IDEXX Laboratories | |
Environmental Protection Agency | 40 CFR 435.41(y) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(b)(6) | ASTM D 975 | 2013 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-396 | 1972 | Minimum Performance Criteria for Roll-Over Protective Structures for Motor Graders | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 147.650(a)(3) | IDUIC regulations | 1977 | Department of Health and Welfare, Title 39, Chapter 1, Idaho Code, Chapter 39-108 (Bobbs-Merrill 1977) | State of Idaho | |
Environmental Protection Agency | 40 CFR 63, Subpart UUUUU, Table 2, (5)(c) | ASTM D 6348 | 2003 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy | ASTM International | |
Coast Guard | 46 CFR 111.60-11(c) | MIL-W-76D | 2003 | Military Specification Wire and Cable, Hook-Up, Electrical, Insulated, General Specification for (2003) (Revision of MIL-W-76D-1992) Amendment 1-2003 | U.S. Department of Defense | |
National Highway Traffic Safety Administration | 49 CFR 572.31(a)(4) | RT Publication | 1997 | Procedures for Disassembly, Inspection, Assembly and Limbs Adjustment of the Hybrid III Dummy | Reprographic Technologies | |
Coast Guard | 46 CFR 164.015-1(a)(4) | ASTM D 4986 | 1998 | Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 86.113-04(a)(2)(i) | CAARB Publication | 1996 | California Regulatory Requirements Applicable to the National Low Emission Vehicle Program | California Air Resources Board | |
Coast Guard | 46 CFR 114.600(b) | ABS Publication | 1975 | Rules for Building and Classing Aluminum Vessels | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 572.35(b)(2)(i) | Drawing No. 86-5001-002 | 1996 | Leg Assembly (RH), Complete, Revision A | General Motors Corporation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (66) | USGS O-3105-83 | 1983 | Chlorophenoxy acids, total recoverable, gas chromatographic | U.S. Geological Survey | |
Occupational Safety and Health Administration | 29 CFR 1910.94(a)(2)(iii) | NFPA 68 | 1954 | Guide for Explosion Venting | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (27) | ASTM D 1126 | 2007 | Standard Test Method for Hardness in Water | ASTM International | |
Coast Guard | 46 CFR 111.33-11 | ABS Publication | 2003 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
National Highway Traffic Safety Administration | 49 CFR 572.15(a) | Drawing No. SA 103C 082 | 1976 | Foot Assembly Right | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 570 | 1989 | Oil and Resin Based Caulking Compound for Building Construction | ASTM International | |
Food and Drug Administration | 21 CFR 178.3870(f)(6)(iv) | FDA Publication | 2011 | Determination of Phenolic Modification of Rosin Derivatives | Food and Drug Administration, U.S. Department of Health and Human Services | |
Labor Department | 41 CFR 50-204.65 | 49 CFR 176 | 2012 | Carriage by Vessel | U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (75) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.66(d)(2) | NIST Handbook 69 | 1963 | Maximum Permissible Body Burdens and Maximum Permissible Concentrations of Radionuclides in Air and in Water for Occupational Exposure | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 3.1.5 | ASTM E 318 | 2015 | Standard Test Methods for Chemical Analysis of Molybdenum (Withdrawn 2010) | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(31) | ASTM A 352/A 352M | 1998 | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts Suitable for Low-Temperature Service | ASTM International | |
Minerals Management Service | 30 CFR 250.1203(b)(2)(iv) | AGA Report No. 10 | 2003 | Speed of Sound in Natural Gas and Other Related Hydrocarbon Gases | American Gas Association | |
Food and Drug Administration | 21 CFR 178.3620(c)(1)(ii) | ASTM D 1500 | 1982 | Standard Method of Test for ASTM Color of Petroleum Products (ASTM Color Scale) | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (19) Nitrite | EPA Method 353.2 | 1993 | Determination of Nitrate-Nitrite Nitrogen by Automated Colorimetry, Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.17(g)(9) | ASTM A 482 | 1993 | Standard Specification for Ferrochromesilicon | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.102 (b)(ii) | ANSI Z87.1-2003 | 2003 | Occupational and Educational Personal Eye and Face Protection Devices | American National Standards Institute |