This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 14 | Quanti-Tray®/2000 Method | 2002 | Quanti-Tray®/2000 Method | IDEXX Laboratories | |
Environmental Protection Agency | 40 CFR 435.41(mm) | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(b)(9) | ASTM D 1945 | 2010 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 147.650(a)(8) | IDUIC regulations | 1977 | Idaho Trade Secrets Act, Title 48, Chapter 8, Idaho Code, sections 48-801 through 48-807 (Bobbs-Merrill 1977 and Supp. 1984) | State of Idaho | |
Environmental Protection Agency | 40 CFR 63.10005(i)(4)(ii) | ASTM D 4006 | 2011 | Standard Test Method for Water in Crude Oil by Distillation, including Annex A1 and Appendix X1 | ASTM International | |
Food and Drug Administration | 21 CFR 168.111(d) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | NFPA 70 | 2002 | National Electrical Code | National Fire Protection Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.300-9(a) | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-42A | 1975 | Airport Light Bases, Transformer Housings, and Junction Boxes, FAA Specification L-857 | Federal Aviation Administration, U.S. Department of Transportation | |
Energy Department | 10 CFR 434.402.1.2.4 | NFRC 200 | 1995 | Procedure for Determining Fenestration Product Solar Heat Gain Coefficients at Normal Incidence (RS-19) | National Fenestration Rating Council | |
Coast Guard | 46 CFR 164.012-1(a)(1) | ASTM E 84 | 1998 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(u)(1)(i) | 35 I.A.C. 215, Subpart X | 1989 | Administrative Code | State of Illinois | |
Rural Utilities Service | 7 CFR 1755.860(i)(4)(iv) | ASTM B 694 | 1986 | Standard Specification for Copper, Copper Alloy, and Copper-Clad Stainless Steel Sheet and Strip for Electrical Cable Shielding | ASTM International | |
Coast Guard | 40 CFR 60.485(e)(1) | ASTM D 2879 | 1997 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Environmental Protection Agency | 40 CFR 260.11(d)(1) | NFPA 30 | 1977 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Federal Aviation Administration | 14 CFR 36.6(c)(1)(viii) | IEC 61260 | 1995 | Electroacoustics-Octave-Band and Fractional-Octave-Band Filters, edition 1.0 | International Electrotechnical Commission | |
Coast Guard | 46 CFR 39.2001(k) | ASTM F 1122 | 1992 | Steel Pipe Flanges and Pipe Fittings | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (41) | EPA Method 1664 | 2010 | n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT–HEM; Non-polar Material) by Extraction and Gravimetry, Revision B | U.S. Environmental Protection Agency | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (7) | ASTM D 4382 | 2002 | Barium by Graphite Furnace Atomic Absorption | ASTM International | |
Coast Guard | 46 CFR 56.01-2(k)(14) | MSS SP-73 | 1996 | Brazing Joints for Copper and Copper Pressure Fittings | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Energy Department | 10 CFR 430 Subpart B, App. T, 2a | ASME A112.19.6 | 1995 | Hydraulic Requirements for Water Closets and Urinals | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.135-15(e)(1)(vi) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Environmental Protection Agency | 40 CFR 1043.20 Emission control area (ECA) | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 141.74(a)(1) | EPA-600-R-94-173 | 1994 | Technical Notes on Drinking Water Methods | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 3.3.2 | APHA Method 602 | 2015 | Tentative Method of the Analysis for Gross Beta Radioactivity Content of the Atmosphere | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (19) Nitrite | APHA Method 4500-NO3 F | 2000 | Nitrate Nitrogen by Selective Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(82) | ASTM D 2015 | 1996 | Standard Test Method for Gross Calorific Value of Solid Fuel by the Adiabatic Bomb Calorimeter | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.137(a)(3)(ii)(B) Note to paragraph (a) | ASTM D 1050 | 2005 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IC (103) | EPA Method 613 | 1982 | Dioxin by GC/HRMS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | USGS I-3271-85 | 1971 | Copper by Flame Atomic Absorption | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 600.311-12(c)(2)(ii) | SAE J-1711 | 2010 | Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-In Hybrid Vehicles | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 243.202-1(d) | ANSI Z245.2 | 1997 | Stationary Compactors—Safety Requirements | American National Standards Institute | |
Surface Mining Reclamation and Enforcement Office | 30 CFR 250.901(d)(16) | ACI 357-R | 1997 | Guide for the Design and Construction of Fixed Offshore Concrete Structures | American Concrete Institute | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(12)(ii) | EPA-600-4-79-020 | 1983 | Method 270.3--Atomic Absorption: gaseous hydride | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 195.3(c) B5 | API 620 | 2002 | Design and Construction of Large Welded Low Pressure Storage Tanks | American Petroleum Institute | |
Coast Guard | 40 CFR 136.3(a) Table IB (31) | EPA Method 351.1 | 1978 | Total Kjeldahl Nitrogen - Automated Phenate | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 300.915(c)(8) | ASTM D 445 | 1988 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.266 Appendix C Table | SAE J-1040 | 1988 | Performance Criteria for Rollover Protective Structures (ROPS) for Construction, Earthmoving, Forestry and Mining Machines | Society of Automotive Engineers | |
Coast Guard | 46 CFR 114.600(b) | UL 1110 | 1994 | Marine Combustible Gas Indicators | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.41(a)(6) | Drawing No. SA 150 M081 | 1987 | Left Leg Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IE (3) | APHA Method 7110 B | 2000 | Gross alpha/beta - Evaporation | American Public Health Association | |
Labor Department | 41 CFR 50-204.2(a)(2)(i) | 30 CFR Chapter I, Subchapter B | 2014 | Respiratory Protective Apparatus; Tests for Permissibility; Fees | Bureau of Mines, U.S. Department of Interior | |
Research and Special Programs Administration | 49 CFR 173.56(j)(1) | APA 87-1 | 2001 | Standard for Construction and Approval for Transportation of Fireworks and Novelties | American Pyrotechnics Association | |
Food and Drug Administration | 21 CFR 172.812(a) | Food Chemicals Codex | 1981 | Glycine | National Academy Press | |
Health and Human Services Department | 45 CFR 162.1402(b)(2) | ASC X12N 276/277 | 2008 | Errata to Health Care Claim Status Request and Response | Washington Publishing Company | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(84) | API MPMS | 2009 | Chapter 12—Calculation of Petroleum Quantities, Section 2—Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 3—Proving Reports; First Edition, reaffirmed 2009; i | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (83) | EPA Method 607 | 1982 | Nitrosamines by GC/NPD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 27 | APHA Standard Methods, 14th Edition | 1975 | Standard Methods for the Examination of Water and Wastewater. 14th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 445.20 | 40 CFR Part 258 | 2015 | Criteria for Municipal Solid Waste Landfills | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 98.364(e)(6) | ASME MFC-18M | 2001 | Measurement of Fluid Flow Using Variable Area Meters | American Society of Mechanical Engineers |