This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App D, 404.3 | BHMA A156.19 | 1997 | Power Assist and Low Energy Power Operated Doors | Builders Hardware Manufacturers Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(f) | EPA SW-846-9056 | 2007 | Determination of Inorganic Anions by Ion Chromatography, Revision 1 | U.S. Department of Transportation | |
Minerals Management Service | 30 CFR 250.1900 | API RP 75 | 2008 | Development of a Safety and Environmental Management Program for Offshore Operations and Facilities | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 52.741(a)(3), Standard Industrial Classification Manual | SIC Manual | 1987 | Standard Industrial Classification Manual | U.S. Government Printing Office | |
Coast Guard | 46 CFR 160.176-4(b) | ASTM B 117 | 1997 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDD, Table 4, (7) | NCASI Method CI/WP-98.01 | 1998 | Chilled Impinger Method For Use At Wood Products Mills to Measure Formaldehyde, Methanol, and Phenol | National Council of the Paper Industry for Air and Stream Improvement, Inc. | |
Energy Department | 10 CFR 440 Appendix A | FedSpec HH-I-1972/2 | 1985 | Polyurethane or Polyisocyanurate Insulation Board Faced with Felt on Both Sides | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 160.052-5(c) | Drawing No. 160.052-1, Sheet 4 | 2012 | Buoyant Vest, Unicellular Plastic Foam, Adult and Child, Insert Patterns | U.S. Coast Guard | |
Federal Railroad Administration | 49 CFR 238 Appendix B Note 3 | ASTM E 1537 | 1999 | Standard Test Method for Fire Testing of Upholstered Seating Furniture | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (21) | EPA Method 622 | 1993 | Organophosphorus Pesticides by Liquid/Liquid Extraction and GC/NPD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Aluminum) | APHA Method 3111 B | 1995 | Metals by Flame Atomic Absorption | American Public Health Association | |
National Highway Traffic Safety Administration | 46 CFR 25.45-2(b)(3)(iii) | ABYC A-1 | 1978 | Marine Liquefied Petroleum Gas Systems | American Boat and Yacht Council | |
Animal and Plant Health Inspection Service | 21 CFR 165.110(b)(4)(iii)(I)(6)(vi) | APHA Method 4500-Cl I | 1995 | Chlorine, Iodometric Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(73) | ASTM D 1945 | 1991 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(10) | NFPA 54 | 1969 | Standard for the Installation of Gas Appliances and Gas Piping | National Fire Protection Association | |
Food and Drug Administration | 21 CFR 189.180(c) | AOAC Journal | 1971 | Gas Chromatographic Determination of Safrole and Related in Nonalcoholic Beverages: Collaborative, Vol. 54, No. 4, pages 900-902 | AOAC International | |
Occupational Safety and Health Administration | 29 CFR 1915.156(b)(2) | ANSI Z41 | 1991 | Protective Footwear | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (21) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Hexachlorobenzene) | EPA Method 525.2 | 1995 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry-Revision 2.0 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60 Subpart JJJJ, Table 2(1)(c)(ii) | ASTM D 6522 | 2005 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1918.24(g)(3) | ANSI A14.5 | 1992 | Safety Requirements for Portable Reinforced Plastic Ladders | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 3285.906 | NFPA 70 | 2005 | National Electrical Code | National Fire Protection Association | |
Federal Highway Administration | 23 CFR 625.4(d)(1)(iii) | AASHTO Standard Specifications for Highway Bridges, 17th ed. | 2002 | Standard Specifications for Highway Bridges | American Association of State Highway and Transportation Officials | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart S Appendix A | ANSI/ASME B30.16 | 2003 | Overhead Hoists (Under-hung) | ASTM International | |
Coast Guard | 40 CFR 136.3(a) Table IA (7) | EPA Method 1600 | 2009 | Enterococci in Water by Membrane Filtration Using membrane-Enterococcus Indoxyl-?-D-Glucoside Agar (mEI) | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 111.60-13(c) | NEMA WC-70/ICEA S-95-658 | 1999 | Standard for Non-Shielded Power Rated Cable 2000V or Less for the Distribution of Electrical Energy | National Electrical Manufacturers Association | |
National Highway Traffic Safety Administration | 49 CFR 572.11(b) | Drawing No. SA 150 M010 | 1987 | Head assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Rural Utilities Service | 7 CFR 1755.522(a)(4) | ASTM B 33 | 1991 | Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 176.720 | IMDG Code | 2006 | International Maritime Dangerous Goods Code | International Maritime Organization | |
Energy Department | 10 CFR 430 Subpart B, App. O, 2.2.2 | UL 896 | 1973 | Oil-Burning Stoves | Underwriters Laboratories, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11119-1 | 2002 | Gas cylinders--Gas cylinders of composite construction--Specification and test methods--Part 1: Hoop-wrapped composite gas cylinders | International Organization for Standardization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (31) | APHA Method 4500-NH3 F | 1992 | Ammonia Nitrogen by Ion Selective Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 4 | APHA Standard Methods, 20th Edition | 1998 | Standard Methods for the Examination of Water and Wastewater. 20th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 75, Appendix F, Section 3.3.6.2 | GPA 2261 | 2000 | Analysis of Natural Gas and Similar Gaseous Mixtures by Gas Chromatography | Gas Processors Association | |
Research and Special Programs Administration | 49 CFR 178.59(d) | CGA C-3 | 1994 | Standard for Welding and Brazing on Thinned Walled Containers | Compressed Gas Association | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(E)(4)(i) | EPA-600-4-79-020 | 1983 | Method 213.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(3) | ANSI A11.1 | 1970 | Practice for Industrial Lighting | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 261.22(a)(1) | EPA Method 9040C | 2004 | pH Electrometric Measurement | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 75.6(a)(3) | ASTM D 287 | 1992 | Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method) | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.944(b) | APA PRP-108 | 1988 | Performance Standards and Policies for Structural Use Panels | APA--The Engineered Wood Association | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(1)(viii) | ISO 1183-1:2004(E) | 2004 | Plastics—Methods for determining the density of non-cellular plastics—Part 1: Immersion method, liquid pyknometer method and titration method, First Edition | International Organization for Standardization | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(9) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 26 | EPA Method 1623 | 2005 | Cryptosporidium and Giardia in Water by Filtration/IMS/FA | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 430.01(i) Table | EPA Method 1650 | 2014 | Adsorbable Organic Halides by Adsorption and Coulometric Titration | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.47(p)(1)(i) | ASTM D 6299 | 2013 | Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. R, 4.1.1 | IES LM-9 | 1999 | Electrical and Photometric Measurements of Fluorescent Lamps | Illuminating Engineering Society of North America | |
National Archives and Records Administration | 36 CFR 1238.14(d)(1)(i) | AIIM MS23 | 1998 | Standard Recommended Practice--Production, Inspection, and Quality Assurance of First-Generation, Silver Microforms of Documents | Association for Information and Image Management | |
Coast Guard | 46 CFR 160.115-5(b)(2) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 63.4751(c) | ASTM D 1475 | 1990 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products | ASTM International | |
Mine Safety and Health Administration | 30 CFR 56.6201(a)(2) | IME Publication 22 | 1993 | Recommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials | Institute of Makers of Explosives |