This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation Sort descending | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Transportation Department | 87 FR 44944 | 49 CFR 171 | UN GHS (Rev.8) (2019) | 2015 | Hazardous Materials: Harmonization With International Standards | United Nations |
Research and Special Programs Administration | 49 CFR 171.12(a) | TDG Regulations | 2005 | Transportation of Dangerous Goods Regulations | Canadian Department of Transportation, Transport Canada | |
Research and Special Programs Administration | 49 CFR 171.12(b)(5) | UN Publication | 2005 | UN Recommendations on the Transport of Dangerous Goods | United Nations | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.22(a) | IAEA TS-R-1 | 1996 | Regulations for the Safe Transport of Radioactive Material | International Atomic Energy Agency | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.22(a) | TDG Regulations | 2005 | Transportation of Dangerous Goods Regulations | Canadian Department of Transportation, Transport Canada | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.23 | IAEA TS-R-1 | 1996 | Regulations for the Safe Transport of Radioactive Material | International Atomic Energy Agency | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.23 | TDG Regulations | 2005 | Transportation of Dangerous Goods Regulations | Canadian Department of Transportation, Transport Canada | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.26 | IAEA TS-R-1 | 1996 | Regulations for the Safe Transport of Radioactive Material | International Atomic Energy Agency | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA S-7 | 2005 | Method for Selecting Pressure Relief Devices for Compressed Gas Mixtures in Cylinders | Compressed Gas Association | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA C-13 | 2000 | Guidelines for Periodic Visual Inspection and Requalification of Acetylene Cylinders | Compressed Gas Association | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM A 262 | 1993 | Standard Practice for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ANSI N14.1 | 2001 | Uranium Hexafluoride--Packaging for Transport | American National Standards Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 1011/A 1011M | 2003 | Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | AWS D1.0 | 1966 | Code for Welding in Building Construction | American Welding Society | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA TB-2 | 1980 | Guidelines for Inspection and Repair of MC-330 and MC-331 Cargo Tanks | Compressed Gas Association | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | AAR Specification M-1002 | 2000 | AAR Manual of Standards and Recommended Practices, Section C-Part III, Specification for Tank Cars | Association of American Railroads | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA C-6.2 | 1996 | Guidelines for Visual Inspection and Requalification of Fiber Reinforced High Pressure Cylinders | Compressed Gas Association | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | AAR Publication | 1988 | AAR Specifications for Design, Fabrication and Construction of Freight Cars, Volume 1 | Association of American Railroads | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI A Kit | 2003 | Chlorine Institute Emergency Kit "A" for 100-lb. & 150-lb. Chlorine Cylinders (with the exception of repair method using Device 8 for side leaks) | Chlorine Institute, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | NAVSEAINST 8020.8B | 1998 | Explosive Hazard Classification Procedures | U.S. Department of Defense | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | AAR Publication | 1988 | AAR Manual of Standards and Recommended Practices, Section I, Specially Equipped Freight Car and Intermodal Equipment | Association of American Railroads | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA C-6.3 | 1991 | Guidelines for Visual Inspection and Requalification of Low Pressure Aluminum Compressed Gas Cylinders | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 9809-2 | 2000 | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 2: Quenched and Tempered Steel Cylinders with Tensile Strength Greater than or Equal to 1 100 MPa | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11114-2 | 2000 | Transportable gas cylinders-- Compatibility of cylinder and valve materials with gas contents--Part 2: Non- metallic materials | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 515/A 515M | 2003 | Standard Specification for Carbon Steel Plates for Pressure Vessels for Intermediate and Higher Temperature Service | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11621 | 1997 | Gas cylinders--Procedures for change of gas service | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI B Kit | 2003 | Chlorine Institute Emergency Kit "B" for Chlorine Ton Containers (with the exception of repair method using Device 9 for side leaks) | Chlorine Institute, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | AFTO 11A-1-47 | 1998 | Explosive Hazard Classification Procedures | U.S. Department of Defense | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | AA Publication | 1982 | Aluminum Standards and Data, Seventh Edition | Aluminum Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 2431 | 1984 | Standard Cup Method | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | NIST Handbook H-28 | 1957 | Handbook of Screw-Thread Standards for Federal Service | National Institute of Standards and Technology, U.S. Department of Commerce | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM B 209 | 1993 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | API 1604 | 1996 | Closures of Underground Petroleum Storage Tanks | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM D 1709 | 2001 | Standard Test Method for Impact Resistance of Plastic Film by the Free-Falling Dart Method | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI Drawing No. H50155 | 1996 | Type 1-1/2 JQ 225 | Chlorine Institute, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | DLAR 8220.1 | 1998 | Explosive Hazard Classification Procedures | U.S. Department of Defense | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | DOD TB 700-2 | 1998 | Explosive Hazard Classification Procedures | U.S. Department of Defense | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 2919 | 1980 | Sealed Radioactive Sources--Classification | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM A 20/A 20M | 1993 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | APA 87-1 | 2001 | Standard for Construction and Approval for Transportation of Fireworks, Novelties, and Theatrical Pyrotechnics | American Pyrotechnics Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASME B31.4 | 1998 | Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM D 1835 | 1997 | Standard Specification for Liquefied Petroleum (LP) Gases | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI Drawing No. H51970 | 1996 | Type 1-1/2 JQ 225 | Chlorine Institute, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | DOE CAPE–1662 | 1988 | Civilian Application Program Engineering Drawings, Revision 1 and Supplement 1 | U.S. Department of Energy | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ISO 3036 | 1975 | Board-Determination of Puncture Resistance | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 3807-2 | 2000 | Cylinders for acetylene--Basic requirements--Part 2: Cylinders with fusible plugs | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | OECD No. 404 | 1992 | Guideline for Testing of Chemicals, Acute Dermal Irritation/Corrosion | Organization for Economic Cooperation and Development | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 9809-3 | 2000 | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 3: Normalized Steel Cylinders | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM A 240/A 240M | 1999 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11117 | 1998 | Gas cylinders--Valve protection caps and valve guards for industrial and medical gas cylinders--Design, construction and tests | International Organization for Standardization |