| Environmental Protection Agency |
|
40 CFR 272, Subpart FF |
NJHWMP |
2014 |
State of New Jersey Hazardous Waste Management Program (Reserved)
|
State of New Jersey |
| Transportation Department |
89 FR 15636 |
49 CFR 178 |
CGA C-20:2014 |
2014 |
Hazardous Materials: Adoption of Miscellaneous Petitions and Updating Regulatory Requirements
|
Compressed Gas Association |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 60 |
SAE J2264_201401 |
2014 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 141.74(a)(2) Table Note 2 |
APHA Standard Methods On-Line |
2014 |
On-line editions of Standard Methods for the Examination of Water and Wastewater
|
American Public Health Association |
| Homeland Security Department |
89 FR 76676 |
46 CFR 162 |
ASTM D975-14 |
2014 |
Marine Equipment on Board Vessels and Offshore Units or Facilities
|
ASTM International |
| Transportation Department |
85 FR 44994 |
49 CFR 179 |
AAR MSRP Section C Part III |
2014 |
Hazardous Materials: Liquefied Natural Gas by Rail
|
Association of American Railroads |
| Environmental Protection Agency |
|
40 CFR 272, Subpart OO |
RIHWMP |
2014 |
State of Rhode Island Hazardous Waste Management Program (Reserved)
|
State of Rhode Island |
| Environmental Protection Agency |
|
40 CFR 63.5935 Corrosion-resistant industry standard |
ASTM D3982 |
2014 |
Standard Specification for Contact Molded Fiberglass (Glass Fiber Reinforced Thermosetting Resin) Ducts
|
ASTM International |
| Energy Department |
86 FR 40765 |
10 CFR 431 |
CSA C747-09 (R2014) |
2014 |
Energy Conservation Program: Test Procedure for Dedicated-Purpose Pool Pump Motors
|
Canadian Standards Association |
| Labor Department |
|
41 CFR 50-204.75 |
49 CFR 174 |
2014 |
Carriage by Rail
|
U.S. Department of Transportation |
| Alcohol, Tobacco, Firearms, and Explosives Bureau |
|
27 CFR 13.101 |
7 CFR 205 |
2014 |
National Organic Program Rules
|
U.S. Department of Agriculture |
| Environmental Protection Agency |
|
40 CFR 141.131(d)(3) |
APHA Method 5310 D |
2014 |
Organic carbon TOC, High-Temperature Combustion Method
|
American Public Health Association |
| Homeland Security Department |
89 FR 50058 |
46 CFR 53 |
SAE J1475_201406 |
2014 |
Updates to Marine Engineering Standards
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 141.131(a)(2) |
APHA Method 4500-Cl I |
2014 |
Chlorine, Iodometric Electrode
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 80.8(e)(1)(iii) |
ASTM D5842 |
2014 |
Standard Practice for Sampling and Handling of Fuels for Volatility Measurement
|
ASTM International |
| Transportation Department |
89 FR 15636 |
49 CFR 107 |
CGA C-20:2014 |
2014 |
Hazardous Materials: Adoption of Miscellaneous Petitions and Updating Regulatory Requirements
|
Compressed Gas Association |
| Environmental Protection Agency |
|
40 CFR 141.40(a)(3) Table 1 (molybdenum) |
APHA Method 3125 |
2014 |
Metals by Inductively Coupled Plasma/Mass Spectrometry
|
American Public Health Association |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1066 |
SAE J2264_201401 |
2014 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 141.74(a)(2) Table (Free Chlorine) |
APHA Method 4500-Cl D |
2014 |
Chlorine, Amperometric direct
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 1065.1010(b)(14) |
ASTM D1838 |
2014 |
Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 141.131(a)(2) |
APHA Method 6251 B |
2014 |
Standard Methods for the Examination of Water and Wastewater
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 147.150 |
AZUIC regulations |
2014 |
State-administered program (Reserved)
|
State of Arizona |
| Transportation Department |
87 FR 44944 |
49 CFR 172 |
ISO 14246:2014/Amd 1:2017 |
2014 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 272, Subpart AAA |
GUHWMP |
2014 |
Territory of Guam Hazardous Waste Management Program (Reserved)
|
Guam Territory |
| Environmental Protection Agency |
|
40 CFR 430, Appendix A |
EPA Method 1653 |
2014 |
Chlorinated Phenolics in Wastewater by In Situ Acetylation and GCMS
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1048 |
SAE J2951_201401 |
2014 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Federal Communications Commission |
88 FR 67108 |
47 CFR 15 |
ANSI C63.4-2014 |
2014 |
Updating References to Standards Related to the Commission's Equipment Authorization Program
|
Institute of Electrical and Electronics Engineers |
| Energy Department |
88 FR 17934 |
10 CFR 431 |
ASME MFC-12M-2006 (R2014) |
2014 |
Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps
|
American Society of Mechanical Engineers |
| Homeland Security Department |
89 FR 76676 |
46 CFR 76 |
ASTM D975-14 |
2014 |
Marine Equipment on Board Vessels and Offshore Units or Facilities
|
ASTM International |
| Transportation Department |
85 FR 27810 |
49 CFR 180 |
ISO 14246:2014(E) |
2014 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 272, Subpart G |
COHWMP |
2014 |
State of Colorado Hazardous Waste Management Program (Reserved)
|
State of Colorado |
| Federal Trade Commission |
94 FR 20788 |
16 CFR 460.5 (e)(2)(x) |
ASTM C1374-14 |
2014 |
Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
|
ASTM International |
| Federal Communications Commission |
|
47 CFR 15.31(a)(4) |
ANSI C63.4-2014 |
2014 |
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.153(a)(2) |
49 CFR Part 178 |
2014 |
Shipping Container Specifications
|
U.S. Department of Transportation |
| Labor Department |
|
41 CFR 50-204.2(a)(2)(i) |
30 CFR Chapter I, Subchapter D |
2014 |
Electrical Equipment, Lamps, Methane Detectors; Tests for Permissibility; Fees
|
Bureau of Mines, U.S. Department of Interior |
| Energy Department |
87 FR 53618 |
10 CFR 429 |
ANSI C78.79-2014 (R2020) |
2014 |
Energy Conservation Program: Test Procedures for General Service Fluorescent Lamps, Incandescent Reflector Lamps, and General Service Incandescent Lamps
|
American National Standards Institute |
| Transportation Department |
85 FR 80544 |
49 CFR 221 |
AAR S-4250 |
2014 |
Miscellaneous Amendments to Brake System Safety Standards and Codification of Waivers
|
Association of American Railroads |
| Homeland Security Department |
89 FR 76676 |
46 CFR 163 |
ASTM D975-14 |
2014 |
Marine Equipment on Board Vessels and Offshore Units or Facilities
|
ASTM International |
| Environmental Protection Agency |
85 FR 78412 |
40 CFR 1065 |
ASTM D93-13 |
2014 |
Fuels Regulatory Streamlining
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 430.01(a) |
EPA Method 1650 |
2014 |
Adsorbable Organic Halides by Adsorption and Coulometric Titration
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 1066.1010(b)(7) |
SAE J-2951 |
2014 |
Drive Quality Evaluation for Chassis Dynamometer Testing
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 63.5935 Corrosion-resistant industry standard |
ASTM D3839 |
2014 |
Standard Guide for Underground Installation of Fiberglass (Glass-Fiber Reinforced Thermosetting-Resin) Pipe
|
ASTM International |
| Labor Department |
|
41 CFR 50-204.75 |
49 CFR 175 |
2014 |
Carriage by Aircraft
|
U.S. Department of Transportation |
| Environmental Protection Agency |
85 FR 63394 |
40 CFR 60 |
SW-846 Method 6020B |
2014 |
Test Methods and Performance Specifications for Air Emission Sources
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 147.800 |
IAUIC regulations |
2014 |
State of Iowa-administered program (Reserved)
|
State of Iowa |
| Transportation Department |
87 FR 44944 |
49 CFR 173 |
ISO 14246:2014/Amd 1:2017 |
2014 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Housing and Urban Development Department |
89 FR 75704 |
24 CFR 3280 |
ASTM E119–14 |
2014 |
Manufactured Home Construction and Safety Standards
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 268.40(b) |
EPA Method 1310B |
2014 |
Extraction Procedure (EP) Toxicity Test Method and Structural Integrity Test
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
89 FR 42932 |
40 CFR 63 |
SW–846–6020B |
2014 |
New Source Performance Standards for the Synthetic Organic Chemical Manufacturing Industry and National Emission Standards for Hazardous Air Pollutants for the Synthetic Organic Chemical Manufacturing Industry and Group I & II Polymers and Resins Industry
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 2 |
SAE J2951_201401 |
2014 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |