| Environmental Protection Agency |
|
40 CFR 435.11(o) |
EPA Method 1655 |
2015 |
Determination of Crude Oil Contamination in Non-Aqueous Drilling Fluids by Gas Chromatography/Mass Spectrometry (GC/MS)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 435.41(y) |
EPA Method 1617 |
2015 |
Static Sheen Test
|
U.S. Environmental Protection Agency |
| Homeland Security Department |
88 FR 16310 |
46 CFR 111 |
CSA–C22.2 No. 0-10 (R2015) |
2015 |
Update to Electrical Engineering Regulations
|
Canadian Standards Association |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 1(a) |
EPA Method 1631 |
2015 |
Mercury in Water by Oxidation, Purge and Trap, and Cold Vapor Atomic Fluorescence Spectrometry
|
U.S. Environmental Protection Agency |
| Transportation Department |
85 FR 27810 |
49 CFR 176 |
UN Manual of Tests and Criteria Rev. 6/Amend. 1 |
2015 |
Hazardous Materials: Harmonization With International Standards
|
United Nations |
| Environmental Protection Agency |
|
40 CFR 435.13 Note 8 |
EPA Method 1646 |
2015 |
Procedure for Mixing Base Fluids With Sediments
|
U.S. Environmental Protection Agency |
| Homeland Security Department |
88 FR 16310 |
46 CFR 111 |
IEEE C37.14-2015 |
2015 |
Update to Electrical Engineering Regulations
|
Institute of Electrical and Electronics Engineers |
| Environmental Protection Agency |
|
40 CFR 98.464(b)(4)(i)(E) |
APHA Method 2540 G |
2015 |
Total, Fixed, and Volatile Solids in Solid and Semisolid Samples NDG
|
American Public Health Association |
| Homeland Security Department |
88 FR 16310 |
46 CFR 113 |
CAN/CSA-C22.2 NO. 0-10 (R2015) |
2015 |
Update to Electrical Engineering Regulations
|
Canadian Standards Association |
| Nuclear Regulatory Commission |
87 FR 65128 |
10 CFR 50 |
ASME OM Code Case OMN-28 |
2015 |
American Society of Mechanical Engineers 2019-2020 Code Editions
|
American Society of Mechanical Engineers |
| Federal Communications Commission |
|
47 CFR 2.1041(b) |
ANSI C63.26-2015 |
2015 |
American National Standard of Procedures for Compliance Testing of Transmitters Used in Licensed Radio Services
|
American National Standards Institute |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.III.1.NH-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 63.5935 Corrosion-resistant industry standard |
ASME RTP-1 |
2015 |
Reinforced Thermoset Plastic Corrosion-Resistant Equipment
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.7(k)(1) |
APHA Method 2540 G |
2015 |
Total, Fixed, and Volatile Solids in Solid and Semisolid Samples
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 86.1(d)(1)(i) |
LEV III Exhaust Emission Standards |
2015 |
Title 13, Division 3, Chapter 1, Article 2 Approval of Motor Vehicle Pollution Control Devices (New Vehicles), §1961.2 Exhaust Emission Standards & Test Procedures—2015 & Subsequent Model Passenger Cars, Light-Duty Trucks, & Medium-Duty Vehicles
|
California Air Resources Board |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 86 |
CSA IR–1–15 |
2015 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
Canadian Standards Association |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.CC.NC-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Health and Human Services Department |
89 FR 51738 |
21 CFR 210 |
ISO 9000 |
2015 |
Current Good Manufacturing Practice, Certification, Postmarketing Safety Reporting, and Labeling Requirements for Certain Medical Gases
|
International Organization for Standardization |
| Transportation Department |
89 FR 25434 |
49 CFR 171 |
ISO 11120:2015(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Housing and Urban Development Department |
89 FR 75704 |
24 CFR 3280 |
ANSI Z21.5.1–2015/CSA 7.1– 2015 |
2015 |
Manufactured Home Construction and Safety Standards
|
Canadian Standards Association |
| Environmental Protection Agency |
|
40 CFR 435 Appendix 3, Subpart A |
EPA Method 1646 |
2015 |
Procedure for Mixing Base Fluids With Sediments
|
U.S. Environmental Protection Agency |
| Homeland Security Department |
88 FR 16310 |
46 CFR 112 |
CAN/CSA-C22.2 NO. 0-10 (R2015) |
2015 |
Update to Electrical Engineering Regulations
|
Canadian Standards Association |
| Environmental Protection Agency |
|
40 CFR 63.6675 Backup power for renewable |
Alaska Statute 42.45.045 |
2015 |
Renewable energy grant fund and recommendation program
|
State of Alaska |
| Environmental Protection Agency |
|
40 CFR 268.48(a), Universal Treatment Standards Table Footnote 4 |
EPA SW-846 |
2015 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods
|
U.S. Environmental Protection Agency |
| Transportation Department |
89 FR 25434 |
49 CFR 175 |
ISO 17871:2015(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Transportation Department |
85 FR 8104 |
49 CFR 191 |
API RP 1170 |
2015 |
Pipeline Safety: Safety of Underground Natural Gas Storage Facilities
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 1(a) |
EPA Method 1631E |
2015 |
Mercury in Water by Oxidation, Purge and Trap, and Cold Vapor Atomic Fluorescence Spectrometry, Revision E
|
U.S. Environmental Protection Agency |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ANSI/ASSE Z88.2-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Safety Engineers |
| Health and Human Services Department |
89 FR 51738 |
21 CFR 201 |
ISO 9000 |
2015 |
Current Good Manufacturing Practice, Certification, Postmarketing Safety Reporting, and Labeling Requirements for Certain Medical Gases
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 435.13 Note 6 |
EPA Method 1646 |
2015 |
Procedure for Mixing Base Fluids With Sediments
|
U.S. Environmental Protection Agency |
| Homeland Security Department |
88 FR 16310 |
46 CFR 111 |
IEEE C37.27-2015 |
2015 |
Update to Electrical Engineering Regulations
|
Institute of Electrical and Electronics Engineers |
| Transportation Department |
85 FR 27810 |
49 CFR 180 |
ISO 17871:2015(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Homeland Security Department |
88 FR 16310 |
46 CFR 110 |
ANSI/ISA 12.12.01-2015 |
2015 |
Update to Electrical Engineering Regulations
|
International Society of Automation |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.III.NCA-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Homeland Security Department |
89 FR 50058 |
46 CFR 53 |
ASME B16.1–2015 |
2015 |
Updates to Marine Engineering Standards
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 63.5935 Corrosion-resistant industry standard |
ASTM D5364 |
2015 |
Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 435.15 Note 6 |
EPA Method 1644 |
2015 |
Method for Conducting a Sediment Toxicity Test with Leptocheirus plumulosus and Non-Aqueous Drilling Fluids or Synthetic-Based Drilling Muds
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
85 FR 41276 |
40 CFR 63 |
ASTM D2369-10(2015)e1 |
2015 |
National Emission Standards for Hazardous Air Pollutants: Paper and Other Web Coating Residual Risk and Technology Review
|
ASTM International |
| Transportation Department |
85 FR 27810 |
49 CFR 173 |
ISO 11118:2015 |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 600 |
CSA IR–1–15 |
2015 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
Canadian Standards Association |
| Environmental Protection Agency |
|
40 CFR 272, Subpart UU |
VTHWMP |
2015 |
State of Vermont Hazardous Waste Management Program (Reserved)
|
State of Vermont |
| Environmental Protection Agency |
|
40 CFR 82, Subpart B, Appendix A, SAE J-1990, Section 2.1.2 |
CGA S-1.1 |
2015 |
Pressure Relief Device Standard Part 1—Cylinders for Compressed Gases
|
Compressed Gas Association |
| Environmental Protection Agency |
|
40 CFR 435 Appendix 4, Subpart A |
EPA Method 1647 |
2015 |
Protocol for the Determination of Degradation of Non Aqueous Base Fluids in a Marine Closed Bottle Biodegradation Test System: Modified ISO 11734:1995
|
U.S. Environmental Protection Agency |
| Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(6) |
API Bulletin 92L |
2015 |
Drilling Ahead Safely with Lost Circulation in the Gulf of Mexico
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 59.508(a) |
EPA Method 311 |
2015 |
Analysis of Hazardous Air Pollutant Compounds in Paints and Coatings by Direct Injection into a Gas Chromatograph (40 CFR part 63, appendix A
|
U.S. Environmental Protection Agency |
| Homeland Security Department |
88 FR 16310 |
46 CFR 112 |
IEEE C37.13-2015 |
2015 |
Update to Electrical Engineering Regulations
|
Institute of Electrical and Electronics Engineers |
| Safety and Environmental Enforcement Bureau |
84 FR 21977 |
30 CFR 250.730 (d) |
ISO/IEC 17021-1 |
2015 |
Conformity assessment—Requirements for bodies providing audit and certification of management systems—Part 1: Requirements
|
International Organization for Standardization |
| Homeland Security Department |
89 FR 50058 |
46 CFR 53 |
ANSI Z21.22–2015 |
2015 |
Updates to Marine Engineering Standards
|
American National Standards Institute |
| Transportation Department |
89 FR 25434 |
49 CFR 171 |
ISO 21172–1:2015(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 435.41(ee) |
EPA Method 1619 |
2015 |
Suspended Particulate Phase (SPP) Toxicity Test
|
U.S. Environmental Protection Agency |