| Environmental Protection Agency |
|
40 CFR 63.5935 Corrosion-resistant industry standard |
ASTM D5364 |
2015 |
Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 86.1(d)(1)(i) |
LEV III Exhaust Emission Standards |
2015 |
Title 13, Division 3, Chapter 1, Article 2 Approval of Motor Vehicle Pollution Control Devices (New Vehicles), §1961.2 Exhaust Emission Standards & Test Procedures—2015 & Subsequent Model Passenger Cars, Light-Duty Trucks, & Medium-Duty Vehicles
|
California Air Resources Board |
| Transportation Department |
89 FR 25434 |
49 CFR 175 |
ISO 21172–1:2015/Amd 1:2018(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 430.01(i) Table |
EPA Method 1613 |
2015 |
Tetra-through-Octa-Chlorinated Dioxins and Furans by Isotope Dilution HRGC/HRMS
|
U.S. Environmental Protection Agency |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.CC.NC-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Health and Human Services Department |
89 FR 51738 |
21 CFR 210 |
ISO 9000 |
2015 |
Current Good Manufacturing Practice, Certification, Postmarketing Safety Reporting, and Labeling Requirements for Certain Medical Gases
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 82, Subpart B, Appendix A, SAE J-1990, Section 2.1.2 |
CGA S-1.1 |
2015 |
Pressure Relief Device Standard Part 1—Cylinders for Compressed Gases
|
Compressed Gas Association |
| Housing and Urban Development Department |
89 FR 75704 |
24 CFR 3280 |
ANSI/AWC NDS–2015 |
2015 |
Manufactured Home Construction and Safety Standards
|
American Wood Council |
| Environmental Protection Agency |
|
40 CFR 272, Subpart ZZ |
WYHWMP |
2015 |
State of Wyoming Hazardous Waste Management Program (Reserved)
|
State of Wyoming |
| Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(6) |
API Bulletin 92L |
2015 |
Drilling Ahead Safely with Lost Circulation in the Gulf of Mexico
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 435.11(e) |
EPA Method 1646 |
2015 |
Procedure for Mixing Base Fluids With Sediments
|
U.S. Environmental Protection Agency |
| Homeland Security Department |
88 FR 16310 |
46 CFR 112 |
IEEE C37.13-2015 |
2015 |
Update to Electrical Engineering Regulations
|
Institute of Electrical and Electronics Engineers |
| Safety and Environmental Enforcement Bureau |
84 FR 21977 |
30 CFR 250.730 (d) |
ISO/IEC 17021-1 |
2015 |
Conformity assessment—Requirements for bodies providing audit and certification of management systems—Part 1: Requirements
|
International Organization for Standardization |
| Transportation Department |
85 FR 8104 |
49 CFR 192 |
API RP 1170 |
2015 |
Pipeline Safety: Safety of Underground Natural Gas Storage Facilities
|
American Petroleum Institute |
| Homeland Security Department |
88 FR 16310 |
46 CFR 112 |
IEC 60079-5:2015 |
2015 |
Update to Electrical Engineering Regulations
|
International Electrotechnical Commission |
| Environmental Protection Agency |
|
40 CFR 435.43 Note 4 |
EPA Method 1619 |
2015 |
Suspended Particulate Phase (SPP) Toxicity Test
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 85 |
CSA IR–1–15 |
2015 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
Canadian Standards Association |
| Homeland Security Department |
89 FR 50058 |
46 CFR 53 |
ASTM F1199–88(2015) |
2015 |
Updates to Marine Engineering Standards
|
ASTM International |
| Energy Department |
88 FR 17934 |
10 CFR 431 |
ANSI/AWWA E103-2015 |
2015 |
Energy Conservation Program: Test Procedure for Commercial and Industrial Pumps
|
American Water Works Association |
| Transportation Department |
85 FR 27810 |
49 CFR 171 |
ISO 17871:2015(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Energy Department |
88 FR 27312 |
10 CFR 429 |
ANSI/AMCA 240-15 |
2015 |
Energy Conservation Program: Test Procedure for Fans and Blowers
|
Air Movement and Control Association |
| Transportation Department |
85 FR 27810 |
49 CFR 180 |
ISO 21172-1:2015(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Transportation Department |
89 FR 25434 |
49 CFR 175 |
ISO 11623:2015(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Transportation Department |
85 FR 27810 |
49 CFR 172 |
UN Manual of Tests and Criteria Rev. 6/Amend. 1 |
2015 |
Hazardous Materials: Harmonization With International Standards
|
United Nations |
| Environmental Protection Agency |
|
40 CFR 265.195(f)(2) Note |
API 1632 |
2015 |
Cathodic Protection of Underground Petroleum Storage Tanks and Piping Systems
|
American Petroleum Institute |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.III.2-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
85 FR 41276 |
40 CFR 63 |
ASTM D2369-10(2015)e1 |
2015 |
National Emission Standards for Hazardous Air Pollutants: Paper and Other Web Coating Residual Risk and Technology Review
|
ASTM International |
| Transportation Department |
85 FR 27810 |
49 CFR 173 |
ISO 11118:2015 |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Energy Department |
87 FR 63588 |
10 CFR 429 |
IEC 60079-7:2015 |
2015 |
Energy Conservation Program: Test Procedure for Electric Motors
|
International Electrotechnical Commission |
| Homeland Security Department |
88 FR 16310 |
46 CFR 112 |
IEEE C37.14-2015 |
2015 |
Update to Electrical Engineering Regulations
|
Institute of Electrical and Electronics Engineers |
| Environmental Protection Agency |
|
40 CFR 435.41(q) |
EPA Method 1655 |
2015 |
Determination of Crude Oil Contamination in Non-Aqueous Drilling Fluids by Gas Chromatography/Mass Spectrometry (GC/MS)
|
U.S. Environmental Protection Agency |
| Transportation Department |
85 FR 8104 |
49 CFR 195 |
API RP 1171, First Edition |
2015 |
Pipeline Safety: Safety of Underground Natural Gas Storage Facilities
|
American Petroleum Institute |
| Energy Department |
87 FR 65856 |
10 CFR 429 |
ANSI/ASHRAE 29-2015 (R2018) |
2015 |
Energy Conservation Program: Test Procedure for Automatic Commercial Ice Makers
|
American Society of Heating, Refrigerating and Air Conditioning Engineers |
| Transportation Department |
85 FR 8104 |
49 CFR 195 |
API RP 1170, First Edition |
2015 |
Pipeline Safety: Safety of Underground Natural Gas Storage Facilities
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 63.14(k)(12) |
Alaska Statute 42.45.045 |
2015 |
Renewable energy grant fund and recommendation program
|
State of Alaska |
| Homeland Security Department |
89 FR 85340 |
6 CFR 37 |
FIPS PUB 202 |
2015 |
Minimum Standards for Driver's Licenses and Identification Cards Acceptable by Federal Agencies for Official Purposes; Waiver for Mobile Driver's Licenses
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Homeland Security Department |
88 FR 16310 |
46 CFR 112 |
IEC 60079-7:2015 |
2015 |
Update to Electrical Engineering Regulations
|
International Electrotechnical Commission |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.I-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Health and Human Services Department |
89 FR 51738 |
21 CFR 211 |
ISO 9000 |
2015 |
Current Good Manufacturing Practice, Certification, Postmarketing Safety Reporting, and Labeling Requirements for Certain Medical Gases
|
International Organization for Standardization |
| Transportation Department |
85 FR 27810 |
49 CFR 171 |
ISO 21172-1:2015(E) |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Nuclear Regulatory Commission |
87 FR 65128 |
10 CFR 50 |
ASME NQA-1-2015 |
2015 |
American Society of Mechanical Engineers 2019-2020 Code Editions
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 435.13 Note 11(b) |
EPA Method 1647 |
2015 |
Protocol for the Determination of Degradation of Non Aqueous Base Fluids in a Marine Closed Bottle Biodegradation Test System: Modified ISO 11734:1995
|
U.S. Environmental Protection Agency |
| Transportation Department |
89 FR 25434 |
49 CFR 172 |
OECD Test No. 439 |
2015 |
Hazardous Materials: Harmonization With International Standards
|
Organization for Economic Cooperation and Development |
| Energy Department |
82 FR 59947 |
10 CFR 851 |
ASME BPVC.III.3-2015 |
2015 |
Worker Safety and Health Program
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 260.11(c)(2) |
EPA Method 1664 |
2015 |
n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material (SGT–HEM; Non-polar Material) by Extraction and Gravimetry, PB99–121949
|
U.S. Environmental Protection Agency |
| Transportation Department |
85 FR 27810 |
49 CFR 173 |
ISO 11120:2015 |
2015 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 114, 3.1.4 |
APHA Method 601 |
2015 |
Tentative Method of Analysis for Gross Alpha Radioactivity Content of the Atmosphere
|
American Public Health Association |
| Federal Trade Commission |
80 FR 71689 |
16 CFR 500.19 |
National Institute of Standards and Technology (NIST) Handboo... |
2015 |
Checking the Net Contents of Packaged Goods, Appendix E—General Tables of Units of Measurements
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Health and Human Services Department |
89 FR 51738 |
21 CFR 213 |
ISO 9000 |
2015 |
Current Good Manufacturing Practice, Certification, Postmarketing Safety Reporting, and Labeling Requirements for Certain Medical Gases
|
International Organization for Standardization |
| Health and Human Services Department |
89 FR 7496 |
21 CFR 4 |
ISO 9000:2015(E), Clause 3 |
2015 |
Medical Devices; Quality System Regulation Amendments
|
International Organization for Standardization |