| National Highway Traffic Safety Administration |
|
49 CFR 571.5(l)(14) |
SAE J-592e |
1972 |
Clearance, Side Marker, and Identification Lamps
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(79) |
ASTM D2013 |
1972 |
Standard Method of Preparing Coal Samples for Analysis
Archived
|
ASTM International |
| Coast Guard |
|
46 CFR 160.055-1(a)(1) |
MIL-W-530F |
1972 |
Webbing, Textile, Cotton, General Purpose, Natural and In Colors
Archived
|
U.S. Department of Defense |
| Coast Guard |
|
46 CFR 160.060-1(a)(2) |
MIL-W-530F |
1972 |
Webbing, Textile, Cotton, General Purpose, Natural and In Colors
Archived
|
U.S. Department of Defense |
| Housing and Urban Development Department |
|
24 CFR 200, Appendix A |
UM Bulletin 62a |
1972 |
Factory-Applied Laminated Roofing Systems Based on Chlorosulfonated Polyethylene (CPSE)
Archived
|
U.S. Department of Housing and Urban Development |
| Coast Guard |
|
46 CFR 125.180(b) |
ABYC E-1 |
1972 |
Bonding of Direct-Current Systems
Archived
|
American Boat and Yacht Council |
| Labor Department |
86 FR 54611 |
29 CFR 1915 |
ANSI A14.2-1972 |
1972 |
Incorporation by Reference; Notice of Corrections
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-7, Method 23, Section 12.5.3.1.1 |
ASTM D2986 |
1971 |
Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-7, Method 23, Section 3.1.1 |
ASTM D2986 |
1971 |
Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60, Appendix A-7, Method 25, Section 7.1.3 |
ASTM D2986 |
1971 |
Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 101, 17.0(9) |
ASTM D2928 |
1971 |
Standard Method for Sampling Stacks for Particulate Matter
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 141.25(a) Table Note 5 |
APHA Standard Methods, 13th Edition |
1971 |
Standard Methods for the Examination of Water and Wastewater. 13th Edition
|
American Public Health Association |
| Consumer Product Safety Commission |
|
16 CFR 1500.49 (e)(3) |
MIL-I-23594B |
1971 |
Insulation tape, electrical; high temperature, polytetrafluoroethylene, pressure-sensitive
|
Defense Standardization Program, Department of Defense |
| Environmental Protection Agency |
|
40 CFR 147.1851(b)(1) |
OKUIC regulations |
1971 |
Oklahoma Statutes, title 17 sections 51-53; title 52 sections 86.1-86.5, 139-153, 243, 307-318.1
|
State of Oklahoma |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (2) |
EPA Method 213.1 |
1971 |
Cadmium (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (3) |
EPA Method 218.1 |
1971 |
Chromium (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (4) |
EPA Method 220.1 |
1971 |
Copper (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (6) |
EPA Method 239.1 |
1971 |
Lead (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (7) |
EPA Method 160.2 |
1971 |
Residue, Non-Filterable (Gravimetric, Dried at 103-105 oC)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (8) |
EPA Method 160.2 |
1971 |
Residue, Non-Filterable (Gravimetric, Dried at 103-105 oC)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (9) |
EPA Method 272.1 |
1971 |
Silver (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 444.12(b)(1) Table (11) |
EPA Method 289.1 |
1971 |
Zinc (Atomic Absorption, Direct Aspiration)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(5)(iii)(B) |
EPA Method 130.1 |
1971 |
Hardness, Total (mg/L as CaCO3), Colorimetric, Automated EDTA
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(5)(iii)(D) |
EPA Method 160.4 |
1971 |
Residue, Volatile (Gravimetric, Ignition at 550 degrees C)
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(5)(iii)(Q) |
EPA Method 352.1 |
1971 |
Nitrogen, Nitrate, Colorimetric, Brucine
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
46 CFR 160.171-17(o) |
Federal Standard 191A |
1971 |
Textile Test Methods, Method 5304.1, Abrasion Reistance of Cloth, Oscillatory Cylinder (Wyzenbek) Method
|
Federal Specifications Standards and Test Methods |
| Occupational Safety and Health Administration |
|
29 CFR 1917.42(h)(1) |
ANSI B30.9 |
1971 |
Standard for Slings
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(17) |
ANSI J6.1 |
1971 |
Rubber Insulating Line Hose
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(18) |
ANSI J6.2 |
1971 |
Rubber Insulating Hoods
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(19) |
ANSI J6.4 |
1971 |
Rubber Insulating Blankets
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(20) |
ANSI J6.5 |
1971 |
Rubber Insulating Sleeves
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(21) |
ANSI J6.6 |
1971 |
Rubber Insulating Gloves
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(h)(22) |
ANSI J6.7 |
1971 |
Rubber Matting for Use Around Electric Apparatus
|
American National Standards Institute |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(o)(1) |
BOR Publication |
1971 |
Safety and Health Regulations for Construction, Part II
|
Bureau of Reclamation, U.S. Department of Interior |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(2) |
SAE Publication |
1971 |
SAE Handbook
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(3) |
SAE J-166 |
1971 |
Trucks and Wagons
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(6) |
SAE J-236 |
1971 |
Self-Propelled Graders
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(7) |
SAE J-237 |
1971 |
Front End Loaders and Dozers
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(8) |
SAE J-319b |
1971 |
Self-Propelled Scrapers
|
Society of Automotive Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1926.6(dd)(9) |
SAE J-320a |
1971 |
Minimum Performance Criteria for Roll-Over Protective Structure for Rubber-Tired, Self-Propelled Scrapers
|
Society of Automotive Engineers |
| Federal Railroad Administration |
|
49 CFR 229.51(b) |
ASME B&PV Code |
1971 |
Boiler and Pressure Vessel Code
|
American Society of Mechanical Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(d)(13) |
ASTM D484 |
1971 |
Standard Specification for Hydrocarbon Drycleaning Solvents
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(l)(2) |
SAE J-211a |
1971 |
Instrumentation for Impact Tests
|
Society of Automotive Engineers |
| National Highway Traffic Safety Administration |
|
49 CFR 572.21(d) |
SAE J-211a |
1971 |
Instrumentation for Impact Tests
|
Society of Automotive Engineers |
| Rural Utilities Service |
|
7 CFR 1728.97(a)(5) |
RUS Bulletin 50-23 (DT-18) |
1971 |
RUS Specification for 60-inch Wood Crossarm Braces
Archived
|
Rural Utilities Service, U.S. Department of Agriculture |
| Rural Utilities Service |
|
7 CFR 1728.97(a)(16) |
RUS Bulletin 50-60 (T-9) |
1971 |
RUS Specification for Single Pole Steel Structures Complete with Arms
Archived
|
Rural Utilities Service, U.S. Department of Agriculture |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(h)(17) |
ASTM D93 |
1971 |
Test for Flash Point by Pensky Martens Closed Cup Tester
Archived
|
ASTM International |
| Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5335-3 |
1971 |
Airport Design Standards--Airports Served by Air Carriers--Bridges and Tunnels on Airports
Archived
|
Federal Aviation Administration, U.S. Department of Transportation |
| Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5340-5A |
1971 |
Segmented Circle Airport Marker System
Archived
|
Federal Aviation Administration, U.S. Department of Transportation |
| Federal Aviation Administration |
|
14 CFR 152, Appendix B(a) |
150/5340-17A |
1971 |
Standby Power for Non-FAA Airport Lighting System
Archived
|
Federal Aviation Administration, U.S. Department of Transportation |