| Environmental Protection Agency |
|
40 CFR 63.1625(b)(3)(iii) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Research and Special Programs Administration |
|
21 CFR 173.228(a) |
Food Chemicals Codex |
1981 |
Ethyl Acetate
|
National Academy Press |
| Environmental Protection Agency |
88 FR 18396 |
40 CFR 60 |
ANSI/ASME PTC 19.10-1981 |
1981 |
Testing Provisions for Air Emission Sources
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.5220(b)(4)(viii) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 246.198(b) |
NFPA 30 |
1981 |
Flammable and Combustible Liquids Code
|
National Fire Protection Association |
| Environmental Protection Agency |
|
40 CFR 799.9420(g)(4) |
OECD Guidelines for Testing of Chemicals |
1981 |
Section 4-Health Effects, Part 451 Carcinogenicity Studies
|
Organization for Economic Cooperation and Development |
| Environmental Protection Agency |
|
40 CFR 60.58b(e)(12)(i)(A) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 147.950(a)(3)(iii) |
LAUIC regulations |
1981 |
Amendment to Statewide Order No. 29-B (Amendment concerning the use of Tables 5A and 6A, etc.) (December 15, 1980, effective January 1, 1981)
|
State of Louisiana |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 571.5(b)(1) |
AATCC 30 |
1981 |
Fungicides, Evaluation on Textiles: Mildew and Rot Resistance of Textiles
|
American Association of Textile Chemists and Colorists |
| Coast Guard |
|
46 CFR 58.03-1(h)(1) |
IMO Publication A.467(XII) |
1981 |
Guidelines for Acceptance of Non-Duplicated Rudder Actuators for Tankers, Chemical Tankers and Gas Carriers of 10,000 Tons Gross Tonnage and Above But Less Than 100,000 Tonnes Deadweight
|
International Maritime Organization |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
ASTM A242 |
1981 |
Standard Specification for High-Strength Low-Alloy Structural Steel
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.2730(q)(3) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.104a(d)(3) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 63.14(f)(1) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 266.111(d)(2) |
NFPA 30 |
1981 |
Flammable and Combustible Liquids Code
|
National Fire Protection Association |
| Environmental Protection Agency |
|
40 CFR 60.105a(g)(4) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.107a(e)(2)(ii) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 61, Appendix B, Method 114, 3.3.2 |
ASTM D1890 |
1981 |
Standard Test Method for Beta Particle Radioactivity of Water
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 62.16050 Table 3 |
ANSI/ASME PTC-19.10-1981 |
1981 |
Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 63.11410(j)(1)(iii) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 270.310(d)(3) |
EPA-450-2-81-005 |
1981 |
Air Pollution Training Institute Course 415: Control of Gaseous Emissions
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 60.5220(b)(5)(i) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [Part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 799.9430(g)(6) |
OECD Guidelines for Testing of Chemicals |
1981 |
Section 4-Health Effects, Part 453 Combined Chronic Toxicity/Carcinogenicity Studies
|
Organization for Economic Cooperation and Development |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table ID Footnote 6 |
APHA Standard Methods, 15th Edition, Supplement |
1981 |
Selected Analytical Methods Approved and Cited by the United States Environmental Protection Agency, Supplement to the 15th Edition of Standard Methods for the Examination of Water and Wastewater
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 60.58b(e)(12)(i)(B) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.105a(b)(2)(ii) |
ANSI/ASME PTC 19.10-1981 |
1981 |
Flue and Exhaust Gas Analyses
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(u)(2) |
SAE J-231 |
1981 |
Minimum Performance Criteria for Falling Object Protective Structures (FOPS)
|
Society of Automotive Engineers |
| Coast Guard |
|
46 CFR 58.03-1(h)(2)) |
IMO Publication A.468(XII) |
1981 |
Code on Noise Levels on Board Ships
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 60.104a(d)(5) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 147.2300(b)(3) |
VTUIC regulations |
1981 |
Vt. Stat. Ann. tit. 3, sections 801 through 847 (1973 and Supp. 1981)
|
State of Vermont |
| Environmental Protection Agency |
|
40 CFR 795.70(f)(9) |
EPA-600-3-82-022 |
1981 |
Laboratory Protocols for Evaluating the Fate of Organic Chemicals in Air and Water. Chapter 3. Photolysis in water. Chapter 4. Oxidation in water.
|
U.S. Environmental Protection Agency |
| Research and Special Programs Administration |
|
21 CFR 173.160(d) |
Chemical Food Index |
1981 |
Citric acid, pp. 86-87
|
National Academy Press |
| Environmental Protection Agency |
|
40 CFR 60.106a(a)(1)(iii) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 267.202(b) |
NFPA 30 |
1981 |
Flammable and Combustible Liquids Code
|
National Fire Protection Association |
| National Highway Traffic Safety Administration |
|
49 CFR 571.5(d)(36) |
ASTM G23 |
1981 |
Standard Practice for Generating Light-Exposure Apparatus (Carbon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.11452(b)(11) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 60.58b(g)(2) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
89 FR 100092 |
40 CFR 62 |
ANSI/ASME PTC 19.10–1981 |
1981 |
Federal Plan Requirements for Commercial and Industrial Solid Waste Incineration Units That Commenced Construction On or Before June 4, 2010 and Have Not Been Modified or Reconstructed Since August 7, 2013
|
American Society of Mechanical Engineers |
| Coast Guard |
|
46 CFR 160.135-5(f)(3) |
MIL-P-17549D(SH) |
1981 |
Military Specification, Plastic Laminates, Fibrous Glass Reinforced, Marine Structural
|
U.S. Department of Defense |
| Environmental Protection Agency |
|
40 CFR 60.105a(d)(4) |
ANSI/ASME PTC 19.10-1981 |
1981 |
Flue and Exhaust Gas Analyses
|
American Society of Mechanical Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1910.6(u)(3) |
SAE J-386 |
1981 |
Operator Restraining Systems for Off-Road Work Machines
|
Society of Automotive Engineers |
| Food and Drug Administration |
|
21 CFR 184.1025(b) |
Food Chemicals Codex |
1981 |
Caprylic Acid
|
National Academy Press |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 171.7(a)(3) |
ASTM A441 |
1981 |
High-Strength Low-Alloy Structural Manganese Vanadium Steel
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.104a(d)(6) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Research and Special Programs Administration |
|
21 CFR 184.1009(b) |
Food Chemicals Codex |
1981 |
Adipic Acid
|
National Academy Press |
| Environmental Protection Agency |
|
40 CFR 60.106a(a)(2)(iii) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 261.1035(b)(4)(iii) |
EPA-450-2-81-005 |
1981 |
Air Pollution Training Institute Course 415: Control of Gaseous Emissions
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 63.11466(c)(1)(iii) |
ASME PTC 19.10 |
1981 |
Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus]
|
American Society of Mechanical Engineers |
| Energy Department |
|
10 CFR 440 Appendix A |
FedSpec HH-I-1972/1 |
1981 |
Polyurethane or Polyisocyanurate Insulation Board Faced with Aluminum Foil on Both Sides
|
Federal Specifications Standards and Test Methods |
| Environmental Protection Agency |
89 FR 38508 |
40 CFR 63 |
ANSI/ASME PTC 19.10–1981 |
1981 |
National Emission Standards for Hazardous Air Pollutants: Coal- and Oil-Fired Electric Utility Steam Generating Units Review of the Residual Risk and Technology Review
|
American Society of Mechanical Engineers |