| Environmental Protection Agency |
|
40 CFR 75, Appendix D, Section 2.1.6.4(b)(3) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 80.2(ggg), No. 2D |
ASTM D975 |
2004 |
Standard Specification for Diesel Fuel Oils
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 80.1426(f)(7)(v)(A) |
ASTM E711 |
2004 |
Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 86.1(g)(11) |
SAE J-1939-13 |
2004 |
Off-Board Diagnostic Connector
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 98.7(d)(1) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.334(b)(2)(i) |
ASTM E1941 |
2004 |
Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.344(c)(1) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.354(c) |
EPA 305-X-04-001 |
2004 |
NPDES Compliance Inspection Manual, Chapter 5, Sampling
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 98.354(d)(1) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.354(h)(1) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.364(e)(1) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.114(b)(2)(i) |
ASTM E1941 |
2004 |
Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.124(m)(1) |
ASME MFC-3M |
2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
|
American Society of Mechanical Engineers |
| Environmental Protection Agency |
|
40 CFR 98.164(b)(5)(xiii) |
ASTM D6883 |
2004 |
Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.164(b)(5)(xvii) |
ISO 3170 |
2004 |
Petroleum liquids—Manual sampling—Third Edition
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 98.184(b)(2)(i) |
ASTM E1941 |
2004 |
Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 258.28(c)(1) |
EPA SW-846 |
2004 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, Method 9095B
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 261.22(a)(1) |
EPA SW-846 |
2004 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, Method 9040C
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 261.22(a)(2) |
EPA SW-846 |
2004 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, Method 1110A
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 261.1034(d)(1)(iii) |
EPA Method 9060A |
2004 |
Total Organic Carbon
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 261.1034(d)(1)(iii) |
EPA SW-846 |
2004 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, Method 9060A
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 261.1063(d)(2) |
EPA SW-846 |
2004 |
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, Method 9060A
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 267.190(a) |
EPA Method 9095B |
2004 |
Paint Filter Liquids Test
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 268 Appendix IX Note |
EPA Method 1310B |
2004 |
Extraction Procedure (EP) Toxicity Test Method and Structural Integrity Test
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 799.5085(h)(1)(vii) |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5085(h)(2) |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5085(j) Table 3, C1 |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5085(j) Table 3, C2 |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5085(j) Table 3, C3 |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5085(j) Table 3, C6 |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5087(h)(1)(vii) |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5087(h)(2) |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5087(j) Table 3, C1 |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5087(j) Table 3, C2 |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5087(j) Table 3, C3 |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5087(j) Table 3, C6 |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5089(h)(1)(vii) |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5089(h)(2) |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5089(j) Table 3, C1 |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5089(j) Table 3, C2 |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5089(j) Table 3, C3 |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(10)(xviii) |
APHA Method 3113 |
2004 |
Metals by Electrothermal Atomic Absorption Spectrometry
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(10)(lxix) |
APHA Method 9223 |
2004 |
Enzyme Substrate Coliform Test
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(15)(vi) |
ASTM D512 |
2004 |
Standard Test Methods for Chloride Ion in Water
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(15)(xvi) |
ASTM D1179 |
2004 |
Test Methods for Fluoride Ion in Water
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(15)(xlvi) |
ASTM D3867 |
2004 |
Standard Test Method for Nitrite-Nitrate in Water
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(e) Table II Footnote 17 |
EPA Method 1631 |
2004 |
Mercury in Water by Oxidation, Purge and Trap, and Cold Vapor Atomic Fluorescence Spectrometry, EPA-821-R-02-019. Revision E
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 141.23(k)(1) Table (10) Copper |
APHA Method 3113 B |
2004 |
Metals by Graphite Furnace Atomic Absorption
|
American Public Health Association |
| Environmental Protection Agency |
|
40 CFR 799.5089(j) Table 3, C6 |
ASTM E1218 |
2004 |
Standard Guide for Conducting Static Toxicity Tests with Microalgae
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.9430(h)(11) |
EPA Report 20T-004 |
2004 |
The Atlas Of Dermal Lesions
|
U.S. Environmental Protection Agency |