| Housing and Urban Development Department |
|
24 CFR 100.201a(b)(1) |
ICC/ANSI A117.1 |
2003 |
American National Standard: Accessible and Usable Buildings and Facilities
|
International Code Council |
| Coast Guard |
|
46 CFR 58.03-1(c)(1) |
ABS Publication |
2003 |
Rules for Building and Classing Steel Vessels, Part 4 Vessel Systems and Machinery
|
American Bureau of Shipping |
| Environmental Protection Agency |
|
40 CFR 63.3151(b) |
ASTM D1475 |
2003 |
Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (6) |
EPA Method 200.5 |
2003 |
Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 4.2
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
85 FR 63394 |
40 CFR 51 |
ASTM D6348-03 |
2003 |
Test Methods and Performance Specifications for Air Emission Sources
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (65) |
ASTM D4327 |
2003 |
Inorganic Anions by Ion Chromatography
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(137) |
ASTM D3588 |
2003 |
Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density (Specific Gravity) of Gaseous Fuels
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 60 Subpart IIII, Table 7(1)(b)(iii) |
ASTM D6348 |
2003 |
Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
|
ASTM International |
| Federal Communications Commission |
|
47 CFR 76.602(b)(9) |
CEA-542-B |
2003 |
CEA Standard: Cable Television Channel Identification Plan
|
Consumer Technology Association |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (32) |
EPA Method 200.5 |
2003 |
Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 4.2
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 799.5085(j) Table 3, A |
ASTM E1782 |
2003 |
Standard Test Method for Determining Vapor Pressure by Thermal Analysis
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.7(e)(8) |
ASTM D1826 |
2003 |
Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
|
ASTM International |
| Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(33) |
API MPMS |
2003 |
Chapter 9—Density Determination, Section 2—Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 63.14(g)(40) |
ASTM D3588 |
2003 |
Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density (Specific Gravity) of Gaseous Fuels
|
ASTM International |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(67) |
API RP 2556 |
2003 |
Recommended Practice for Correcting Gauge Tables for Incrustation
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 63, Subpart UUUUU, Table 1, (5)(c) |
ASTM D6348 |
2003 |
Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IH Footnote 21 |
EPA Method 1604 |
2002 |
Total Coliforms and Escherichia coli (E. coli) in Water by Membrane Filtration by Using a Simultaneous Detection Technique (MI Medium)
|
U.S. Environmental Protection Agency |
| Federal Railroad Administration |
|
49 CFR 227 Appendix B II |
ANSI S12.6 |
2002 |
Methods for Measuring the Real-Ear Attenuation of Hearing Protectors
|
American National Standards Institute |
| Environmental Protection Agency |
|
40 CFR 60 Subpart DDDD, Table 7, Mercury |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 85 |
SAE J2534_200202 |
2002 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (12) |
ASTM D3557B |
2002 |
Cadmium in Water Atomic Absorption
|
ASTM International |
| Federal Communications Commission |
|
47 CFR 76.602(b)(5) |
SCTE 65 (formerly DVS 234) |
2002 |
Service Information Delivered Out-of-Band for Digital Cable Television
|
Society of Cable Telecommunications Engineers |
| Occupational Safety and Health Administration |
|
29 CFR 1915.5(d)(4)(xiv) |
NFPA 17 |
2002 |
Standard for Dry Chemical Extinguishing Systems
|
National Fire Protection Association |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 600 |
SAE J2012_200204 |
2002 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IH Footnote 16 |
Quanti-Tray®/2000 Method |
2002 |
Quanti-Tray®/2000 Method
|
IDEXX Laboratories |
| National Highway Traffic Safety Administration |
|
49 CFR 572.136(a) |
Drawing No. 880105-560 |
2002 |
Complete Leg Assembly
|
Reprographic Technologies |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 12, 14(c) |
ASTM D6784 |
2002 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Health and Human Services Department |
|
45 CFR 162.920(a)(3) |
ASC X12N 837 |
2002 |
Addenda to Health Care Claim: Institutional, Volumes 1 and 2, Version 4010
|
Washington Publishing Company |
| Transportation Department |
89 FR 25434 |
49 CFR 171 |
ISO 11623(E) |
2002 |
Hazardous Materials: Harmonization With International Standards
|
International Organization for Standardization |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(7)(ix) |
EPA-821-R-02-013 |
2002 |
Short-Term Methods for Measuring the Chronic Toxicity of Effluents and Receiving Waters to Freshwater Organisms, Fourth Edition
|
U.S. Environmental Protection Agency |
| Coast Guard |
|
33 CFR 101.115(b) |
IMO Conference Resolution 1 |
2002 |
SOLAS Chapter XI-1 or SOLAS Chapter XI-2
|
International Maritime Organization |
| Pipeline and Hazardous Materials Safety Administration |
|
49 CFR 192.7(c)(2) H1 |
NACE RP-0502 |
2002 |
NACE Standard Recommended Practice: Pipeline External Corrosion Direct Assessment Methodology
|
National Association of Corrosion Engineers |
| Energy Department |
87 FR 27461 |
10 CFR 430 |
NEMA ANSI C79.1:2002 |
2002 |
Energy Conservation Program: Definitions for General Service Lamps
|
National Electrical Manufacturers Association |
| Environmental Protection Agency |
|
40 CFR 141.25(a) Table Note 6 |
ASTM Annual Book of Standards |
2002 |
ASTM Volume 11.01
|
ASTM International |
| Coast Guard |
|
46 CFR 110.10-1(f)(4) |
IEEE C37.14 |
2002 |
Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosures
|
Institute of Electrical and Electronics Engineers |
| Environmental Protection Agency |
|
40 CFR 1066.1010(b)(6) |
SAE J-2711 |
2002 |
Recommended Practice for Measuring Fuel Economy and Emissions of Hybrid-Electric and Conventional Heavy-Duty Vehicles
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 60.17(g)(155) |
ASTM D4294 |
2002 |
Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 75.6(a)(35) |
ASTM D4239 |
2002 |
Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
|
ASTM International |
| Federal Highway Administration |
|
23 CFR 630.1012(b)(1) |
AASHTO Publication |
2002 |
Roadside Design Guide, Chapter 9, Traffic Barriers, Traffic Control Devices, and Other Safety Features for Work Zones
|
American Association of State Highway and Transportation Officials |
| Homeland Security Department |
88 FR 16310 |
46 CFR 110 |
IEEE 45-2002 |
2002 |
Update to Electrical Engineering Regulations
|
Institute of Electrical and Electronics Engineers |
| Environmental Protection Agency |
|
40 CFR 799.5089(h)(2) |
ASTM E1148 |
2002 |
Standard Test Method for Measurements of Aqueous Solubility
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.11516(d)(2) |
CASCAQMD Publication |
2002 |
Guidelines for Demonstrating Equivalency with District Approved Transfer Efficient Spray Guns
|
State of California, South Coast Air Quality Management District's |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 1066 |
SAE J2012_200204 |
2002 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
SAE International |
| Federal Motor Carrier Safety Administration |
|
49 CFR 393.7(b)(6) |
SAE J-2040 |
2002 |
Tail Lamps (Rear Position Lamps) for Use on Vehicles 2032 mm or More in Overall Width
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 1068.45(f) |
SAE J-1930 |
2002 |
Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms
|
Society of Automotive Engineers |
| Environmental Protection Agency |
|
40 CFR 799.5087(j) Table 3, A |
ASTM E1148 |
2002 |
Standard Test Method for Measurements of Aqueous Solubility
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 799.5085(j) Table 3, A |
ASTM E1148 |
2002 |
Standard Test Method for Measurements of Aqueous Solubility
|
ASTM International |
| Health and Human Services Department |
|
45 CFR 162.920(a)(4) |
ASC X12N 835 |
2002 |
Addenda to Health Care Claim Payment/Advice, Version 4010
|
Washington Publishing Company |
| Environmental Protection Agency |
85 FR 41100 |
40 CFR 63 |
ASTM D5965-02 |
2002 |
NESHAP: Surface Coating of Automobiles and Light-Duty Trucks; Miscellaneous Metal Parts and Products; Plastic Parts and Products; Large Appliances; Printing, Coating, and Dyeing of Fabrics and Other Textiles; and Metal Furniture Residual Risk and Techn...
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 80.613(e)(3)(iii)(C) |
ASTM E29 |
2002 |
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
|
ASTM International |