| Coast Guard |
|
46 CFR 162.161-2(c)(1) |
NFPA 2001 |
2008 |
Standard on Clean Agent Fire Extinguishing Systems
|
National Fire Protection Association |
| Coast Guard |
|
46 CFR 170.015(d)(2) |
IMO Resolution MSC 267(85) |
2008 |
Adoption of the International Code on Intact Stability, 2008 (2008 IS Code)
|
International Maritime Organization |
| Coast Guard |
|
45 CFR 162.920(a)(17) |
ASC X12 |
2008 |
Errata to Health Care Claim Status Request and Response (276/277)
|
Washington Publishing Company |
| Environmental Protection Agency |
|
40 CFR 98.7(m)(8) |
EPA Publication |
2008 |
Protocol for Measurement of Tetrafluoromethane (CF4) and Hexafluoroethane (C2F6) Emissions from Primary Aluminum Production
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
|
40 CFR 1043.60 Table 2 |
IMO Publication |
2008 |
International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 63, Subpart UUUUU, Appendix A, Section 4.1.1.5.1 |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(60) |
API RP 2I |
2008 |
In-Service Inspection of Mooring Hardware for Floating Structures; Third Edition
|
American Petroleum Institute |
| Coast Guard |
|
33 CFR 155.140(c)(6) |
ASTM F1779 |
2008 |
Standard Practice for Reporting Visual Observations of Oil on Water
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.354(d)(5) |
ASTM D5614 |
2008 |
Standard Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs
|
ASTM International |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 85 |
ISO 13837:2008(E) |
2008 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
International Organization for Standardization |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1043 |
NIST SP 811 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
National Institute of Standards and Technology, U.S. Department of Commerce |
| Transportation Department |
89 FR 92296 |
14 CFR 97 |
FAA TSO–C194 |
2008 |
Integration of Powered-Lift: Pilot Certification and Operations; Miscellaneous Amendments Related to Rotorcraft and Airplanes
|
Federal Aviation Administration, U.S. Department of Transportation |
| Coast Guard |
|
46 CFR 147.7(d)(1) |
NFPA 2001 |
2008 |
Standard on Clean Agent Fire Extinguishing Systems
|
National Fire Protection Association |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 12, 1(a) |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Transportation Department |
89 FR 92296 |
14 CFR 91 |
RTCA DO–309, Section 2 |
2008 |
Integration of Powered-Lift: Pilot Certification and Operations; Miscellaneous Amendments Related to Rotorcraft and Airplanes
|
Radio Technical Commission for Aeronautics |
| Coast Guard |
|
46 CFR 160.156-11(c)(2)(i)(B) |
ASTM D2584 |
2008 |
Standard Test Method of Ignition Loss for Cured Reinforced Resins
|
ASTM International |
| Energy Department |
85 FR 56475 |
10 CFR 429 |
ANSI C82.1-2004 (R2008) |
2008 |
Energy Conservation Program: Test Procedure for Fluorescent Lamp Ballasts
|
American National Standards Institute |
| Coast Guard |
|
46 CFR 160.133-5(b)(4) |
ASTM A314 |
2008 |
Standard Specification for Stainless Steel Billets and Bars for Forging
|
ASTM International |
| National Highway Traffic Safety Administration |
|
49 CFR 572.181(a)(4) |
NHTSA Publication |
2008 |
Procedures for Assembly, Disassembly and Inspection (PADI) of the ES-2re Side Impact Crash Test Dummy
|
National Highway Traffic Safety Administration, U.S. Department of Transportation |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 1(e) |
ASTM D3173 |
2008 |
Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 1042.104(g) |
IMO Publication |
2008 |
NOX Technical Code, section 6 of Appendix 8
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 63, Subpart DDDDD, Table 6, 3(b) |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 147.3400(a) |
NILUIC regulations |
2008 |
Navajo Nation Statutes, Regulations and Resolution notebook
|
Navajo Indian Lands |
| Safety and Environmental Enforcement Bureau |
84 FR 21969 |
30 CFR 250.198(e)(92) |
ANSI/API Spec. 17J |
2008 |
Specification for Unbonded Flexible Pipe
|
American Petroleum Institute |
| Coast Guard |
|
46 CFR 160.135-5(b)(3) |
ASTM A313/A 313M |
2008 |
Standard Specification for Stainless Steel Spring Wire
|
ASTM International |
| Safety and Environmental Enforcement Bureau |
84 FR 24705 |
30 CFR 250.842(c)(1) |
API RP 14F |
2008 |
Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Upstream Segment
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 60.2730(j) |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Coast Guard |
|
46 CFR 164.120-5(b)(11) |
ASTM D2584 |
2008 |
Standard Test Method of Ignition Loss for Cured Reinforced Resins
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 1043.20 Major conversion |
IMO Publication |
2008 |
International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI
|
International Maritime Organization |
| Environmental Protection Agency |
|
40 CFR 136.3(b)(15)(xliii) |
ASTM D3645 |
2008 |
Standard Test Methods for Beryllium in Water
|
ASTM International |
| Energy Department |
|
10 CFR 430.3(g)(5) |
AHAM RAC-1 |
2008 |
Room Air Conditioners
|
Association of Home Appliance Manufacturers |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 85 |
SAE J2343_200807 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 60 Subpart LLLL, Table 2, Mercury |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 98.7(m)(9) |
EPA AP 42, Section 5.2 |
2008 |
AP 42, Section 5.2, Transportation and Marketing of Petroleum Liquids
|
U.S. Environmental Protection Agency |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1037 |
SAE J2263_200812 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Environmental Protection Agency |
|
40 CFR 1043.60(c) |
IMO Publication |
2008 |
International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI
|
International Maritime Organization |
| Coast Guard |
|
33 CFR 155.140(e)(1) |
NFPA 1001 |
2008 |
Standard for Fire Fighter Professional Qualifications
|
National Fire Protection Association |
| Rural Utilities Service |
|
7 CFR 1728.97(e)(12) |
AWPA P8 |
2008 |
Standard for Oil-Borne Preservatives
|
American Wood Protection Association |
| Transportation Department |
89 FR 92296 |
14 CFR 111 |
FAA TSO–C194 |
2008 |
Integration of Powered-Lift: Pilot Certification and Operations; Miscellaneous Amendments Related to Rotorcraft and Airplanes
|
Federal Aviation Administration, U.S. Department of Transportation |
| Research and Special Programs Administration |
|
49 CFR 171.7(a)(3) |
ICAO Publication |
2008 |
Technical Instructions for the Safe Transport of Dangerous Goods by Air
|
International Civil Aviation Organization |
| Environmental Protection Agency |
89 FR 27842 |
40 CFR 86 |
ISO 13837:2008(E) |
2008 |
Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
|
International Organization for Standardization |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1027 |
SAE J2343_200807 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| Safety and Environmental Enforcement Bureau |
|
30 CFR 250.198(h)(31) |
API MPMS |
2008 |
Chapter 10, Section 3
|
American Petroleum Institute |
| Environmental Protection Agency |
|
40 CFR 136.3(a) Table IB (34) |
ASTM D4190 |
2008 |
Metals by Direct Current Plasma
|
ASTM International |
| Environmental Protection Agency |
|
40 CFR 63.11647(a)(3)(ii) |
ASTM D6784 |
2008 |
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
|
ASTM International |
| Coast Guard |
|
46 CFR 160.133-7(b)(3) |
ASTM A36/A 36M |
2008 |
Standard Specification for Carbon Structural Steel
|
ASTM International |
| Transportation Department |
89 FR 92296 |
14 CFR 61 |
RTCA DO–309, Section 2 |
2008 |
Integration of Powered-Lift: Pilot Certification and Operations; Miscellaneous Amendments Related to Rotorcraft and Airplanes
|
Radio Technical Commission for Aeronautics |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1051 |
SAE J2263_200812 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |
| National Highway Traffic Safety Administration |
|
49 CFR 562.3 |
ANSI/ASAE 390.4 |
2008 |
Definitions and Classifications of Agricultural Field Equipment
|
American Society of Agricultural Engineers |
| Environmental Protection Agency |
88 FR 4296 |
40 CFR 1036 |
SAE J2263_200812 |
2008 |
Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards
|
SAE International |