Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Standards Incorporated by Reference (SIBR) Database
If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.
Accessing Standards Incorporated by Reference
This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
| Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|---|
| Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (2) | EPA Method 213.1 | 1971 | Cadmium (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 86.1(d)(5) | California Regulatory Requirements | 2013 | Title 13, Division 3, Chapter 1, Article 2, Approval of Motor Vehicle Pollution Control Devices, §1968.2 Malfunction and Diagnostic System Requirements—2004 and Sub Model-Year Passenger Cars, Light-Duty Trucks, and Medium-Duty Vehicles and Engines | California Air Resources Board | |
| Mine Safety and Health Administration | 30 CFR 57.12045 | NFPA 70 | 2013 | National Electrical Code | National Fire Protection Association | |
| Occupational Safety and Health Administration | 29 CFR 1910.103(c)(1)(i)(A) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 63.14(b)(1)(iv) | AFPC Book of Methods | 1991 | Section IX, Methods of Analysis For Phosphate Rock, No. 3 Phosphorus—P2O5 or Ca3(PO4)2, Method C—Spectrophotometric Method | Association of Florida Phosphate Chemists | |
| Federal Communications Commission | 47 CFR 15.109(g) | IEC CISPR Publication 22 | 1997 | Information Technology Equipment--Radio Disturbance Characteristics--Limits and Methods of Measurement | International Electrotechnical Commission | |
| Rural Utilities Service | 7 CFR 1728.202(d)(3) | AWPA P9 | 2006 | Standard for Solvents and Formulations for Organic Preservative Systems | American Wood Protection Association | |
| Environmental Protection Agency | 40 CFR 63.5850(e)(4)(i) | ASTM D 6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(g)(5) | ASME B&PV Code | 1969 | Boiler and Pressure Vessel Code, Section VIII, Unfired Pressure Vessels, Including Addenda | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 147.2000(b)(7) | RIUIC regulations | 1981 | Water Quality Regulations for Water Pollution Control, effective November 19, 1981 | State of Rhode Island | |
| Environmental Protection Agency | 40 CFR 63.10885(a)(1) | EPA Method 9095B | 2004 | Paint Filter Liquids Test, Revision 2 | U.S. Environmental Protection Agency | |
| Mine Safety and Health Administration | 30 CFR 70.1900(c) | ACGIH Publication | 1972 | Threshold Limit Values for Substance in Workroom Air | American Conference of Governmental Industrial Hygienists | |
| Environmental Protection Agency | 40 CFR 75, Appendix G, Section 2.1.2 | ASTM D 5373 | 2002 | Standard Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke | ASTM International | |
| National Highway Traffic Safety Administration | 49 CFR 571.202a S5.2.5(b) | SAE J-211/1 | 1995 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
| Coast Guard | 46 CFR 56.60-1(a)(2) | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 272.2101(c)(1) | SDHWMP | 2014 | State of South Dakota Statutes and Regulations for Approved State Hazardous Waste Management Programs | State of South Dakota | |
| Coast Guard | 46 CFR 114.600(b) | NFPA 701 | 1996 | Fire Tests For Flame-Resistant Textiles and Films | National Fire Protection Association | |
| National Highway Traffic Safety Administration | 49 CFR 572.36(f) | Drawing No. 78051-218 | 1987 | Hybrid III Anthropomorphic Test Dummy, Revision T | General Motors Corporation | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table ID (70) | EPA Method 1656 | 1993 | The Determination of Organo-Halide Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
| Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI Z124.7 | 1997 | Prefabricated Plastic Spa Shells | American National Standards Institute | |
| Safety and Environmental Enforcement Bureau | 30 CFR 250.198(g)(7) | ANSI/ASME SPPE-1d, Addenda | 1996 | Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IC (80) | EPA Method 604 | 1982 | Phenols by GC/FID | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 141.74(a)(1) Table Note 7 | ONPG-MUG Test | 1989 | Autoanalysis Colilert System | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 61, Appendix B, Method 114, 5(8) | ASTM D 3648 | 1978 | Standard Practices for the Measurement of Radioactivity | ASTM International | |
| Housing and Urban Development Department | 24 CFR 3280.706(b)(4) | ASTM A 539 | 1990 | Standard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines 1999 HUD/HC http://www.gpo.gov/fdsys/pkg/CFR-2013-title24-vol5/xml/CFR-2013-title24-vol5-sec3280-703.xml | ASTM International | |
| Coast Guard | 46 CFR 161.002-1(b) | ASTM B 117 | 1997 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
| Environmental Protection Agency | 40 CFR 63.14(d)(3)(iii) | EPA-454-R-98-015 | 1997 | Office of Air Quality Planning and Standards (OAQPS) Fabric Filter Bag Leak Detection Guidance | U.S. Environmental Protection Agency | |
| Coast Guard | 33 CFR 104.400(b) | IMO Conference Resolution 1 | 2002 | SOLAS Chapter XI-1 or SOLAS Chapter XI-2 | International Maritime Organization | |
| Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (20) Ortho-phosphate | USGS I-2598-85 | 1985 | Phosphorus, orthoposphate, colorimetric, phosphomolybdate, automated-discrete | U.S. Geological Survey | |
| Environmental Protection Agency | 40 CFR 60.17(g)(184) | ASTM D 6522 | 2000 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International | |
| Coast Guard | 46 CFR 111.50-3(g)(2) | IEC 92-202 | 1996 | Amendment 1 Electrical Installation in Ships, Part 202: System Design-Protection | International Electrotechnical Commission | |
| Research and Special Programs Administration | 49 CFR 192.7(c)(2) C11 | ASTM D 2513 | 1999 | Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing and Fittings | ASTM International | |
| Animal and Plant Health Inspection Service | 21 CFR 165.110(b)(4)(iii)(i)(6)(iv) | APHA Method 4500-Cl G | 1995 | Residual Chlorine by Spectrophotometric, DPD | American Public Health Association | |
| Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.214(a) | API 1104 | 2001 | Standard for Welding Pipelines and Related Facilities | American Petroleum Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(n)(1) | DHHS Publication 76-120 | 1975 | List of Personal Hearing Protectors and Attenuation Data | U.S. Department of Health and Human Services | |
| Food and Drug Administration | 21 CFR 176.170(a)(5) | ASTM D 611 | 1982 | Standard Test Method for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents | ASTM International | |
| Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA C-6.3 | 1991 | Guidelines for Visual Inspection and Requalification of Low Pressure Aluminum Compressed Gas Cylinders | Compressed Gas Association | |
| National Highway Traffic Safety Administration | 49 CFR 571.213 S5.4.1.2 | AATCC Publication | 2013 | Geometric Gray Scale | American Association of Textile Chemists and Colorists | |
| Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.1 | 1998 | Cast Iron Pipe Flanges and Flanged Fittings, Classes 25, 125, 250 | American Society of Mechanical Engineers | |
| Environmental Protection Agency | 40 CFR 136.3(a) Table IB (59) | EPA Method 267.2 | 1978 | Ruthenium (Atomic Absorption, Furnace Technique) | U.S. Environmental Protection Agency | |
| Energy Department | 10 CFR 440 Appendix A | UL 296 | 1989 | Oil Burners | Underwriters Laboratories, Inc. | |
| Environmental Protection Agency | 40 CFR 761.71(b)(2)(vi) | ASTM D 1796 | 1990 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) | ASTM International | |
| Coast Guard | 33 CFR 127.1203(b) | 29 CFR 1910.1000, Z Tables | 2014 | Permissible Exposure Limits | Occupational Safety and Health Administration, U.S. Department of Labor | |
| Coast Guard | 46 CFR 160.151-33(c) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
| Environmental Protection Agency | 40 CFR 1066.310(b)(7)(i) | SAE J-1263 | 2010 | Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques | Society of Automotive Engineers | |
| Environmental Protection Agency | 40 CFR 136.3(b)(10)(xvi) | APHA Method 3111 | 1999 | Metals by Flame Atomic Absorption Spectrometry | American Public Health Association | |
| Environmental Protection Agency | 40 CFR 763 Appendix A (III)(L)(6) | EPA Method 2A | 2015 | Direct Measurement of Gas Volume through Pipes and Small Ducts, 40 CFR Part 60 Appendix A | U.S. Environmental Protection Agency | |
| Environmental Protection Agency | 40 CFR 98.124(m)(5) | ASME MFC-7M | 1992 | Measurement of Fluid Flow in Pipes Using Vortex Flow Meters | American Society of Mechanical Engineers | |
| Surface Mining Reclamation and Enforcement Office | 30 CFR 870.20 Table 1 | ASTM D 2234 | 1989 | Standard Practice for Collection of a Gross Sample of Coal | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1910.111(b)(7)(vi) | ASTM A 395 | 1968 | Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures | ASTM International |