This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.145(d)(10) | ASAE R276 | 1967 | Emblem for Identifying Slow Moving Vehicles | American Society of Agricultural Engineers | |
Environmental Protection Agency | 40 CFR 60.17(g)(97) | ASTM D 2504 | 1967 | Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(7) | SAE J-527a | 1967 | Brazed Double Wall Low Carbon Steel Tubing | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(12) | ANSI A17.2b | 1967 | Practice for the Inspection of Elevators (Inspector's Manual) Supplement | American National Standards Institute | |
Housing and Urban Development Department | 24 CFR 200.945(a)(1)(ii) | ASTM D 1335 | 1967 | Standard Test Method for Tuft Bind of Pile Floor Coverings | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.103(c)(1)(v)(B) | ANSI B31.1 | 1967 | Code for Pressure Piping | American National Standards Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 333 | 1967 | Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1615.4(f)(1) Footnote 4 | ASTM D 1776 | 1967 | Conditioning Textiles and Textile Products for Testing | ASTM International | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(2)(iii)(B) | SAE J-995 | 1967 | Mechanical and Quality Requirements for Steel Nuts | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(27) | USA Z53.1 | 1967 | Safety Color Code for Marking Physical Hazards, (also referred to as ANSI Z53.1-1967) | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.552(d) | ANSI A17.2b | 1967 | Practice for the Inspection of Elevators | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(76) | ANSI Z41.1 | 1967 | Men's Safety Toe Footwear | American National Standards Institute | |
Coast Guard | 46 CFR 160.047-1(a)(2) | MIL-B-2766 | 1967 | Batt, Fibrous Glass, Lifesaving Equipment | U.S. Department of Defense | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | UM Bulletin 48 | 1967 | Labels of Independent Programs for Certifying Pressure-Treated Lumber and Plywood with 5 supplements | U.S. Department of Housing and Urban Development | |
Coast Guard | 46 CFR 160.047-3a(b)(1)(i) | Federal Standard 151 | 1967 | Metals, Test Methods | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(11) | ANSI A17.2b | 1967 | Practice for the Inspection of Elevators | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(a)(3)(iv) | ANSI A17.2b | 1967 | Practice for the Inspection of Elevators | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(14) | NFPA 62 | 1967 | Standard for the Prevention of Dust Explosions in the Production, Packaging, and Handling of Pulverized Sugar and Cocoa | National Fire Protection Association | |
Mine Safety and Health Administration | 30 CFR 75.1107-16(b) | NFPA 72A | 1967 | Installation, Maintenance, and Use of Local Protective Signaling Systems | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(40) | ANSI K13.1 | 1967 | Identification of Gas Mask Containers | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 761.71(b)(2)(vi) | ASTM E 258 | 1967 | Standard Test Method for Total Nitrogen Inorganic Material by Modified Kjeldahl Method | ASTM International | |
Environmental Protection Agency | 40 CFR 60.485a(g)(5) | ASTM D 2504 | 1967 | Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(c)(8)(iv) | ANSI B30.2.0 | 1967 | Safety Code for Overhead and Gantry Cranes | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.103 S4.3 | SAE J-902a | 1967 | Passenger Car Windshield Defrosting Systems | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.253(d)(1)(i)(A)(2) | ANSI B31.1 | 1967 | Code for Pressure Piping, section 2, Industrial Gas and Air Piping Systems | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 77.403-1(e)(2) | USACE EM-385-1-1 | 1967 | General Safety Requirements | Department of the Army, U.S. Army Corps of Engineers | |
Consumer Product Safety Commission | 16 CFR 1615.4(a)(9) Footnote 3 | ASTM D 2654 | 1967 | Method of Test for Amount of Moisture in Textile Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 61.18(a)(8) | ASTM D 2504 | 1967 | Standard Test Method for Noncondensable Gases in C3 and Lighter Hydrocarbon Products by Gas Chromatography | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1616.5(b)(1) Footnote 4 | ASTM D 1776 | 1967 | Conditioning Textiles and Textile Products for Testing | ASTM International | |
Mine Safety and Health Administration | 30 CFR 77.403-2 | SAE J-397a | 1967 | Deflection Limiting Volume-Protective Structures Laboratory Evaluation | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.66 Appendix D (c)(4) | ANSI A12.1 | 1967 | Safety Requirements for Floor and Wall Openings, Railings, and Toe Boards | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(18)(iii) | ANSI B31.1.0 | 1967 | Code for Pressure Piping | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 71.402(b) | AIA Code | 1967 | National Building Code | American Insurance Association | |
Mine Safety and Health Administration | 30 CFR 75.1107-4(b) | NFPA 72A | 1967 | Installation, Maintenance, and Use of Local Protective Signaling Systems | National Fire Protection Association | |
Housing and Urban Development Department | 24 CFR 200.945(a)(2) | ASTM D 1335 | 1967 | Standard Test Method for Tuft Bind of Pile Floor Coverings | ASTM International | |
Coast Guard | 46 CFR 160.048-1(a)(1) | MIL-B-2766 | 1967 | Batt, Fibrous Glass, Lifesaving Equipment | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(19) | ANSI B30.2.0 | 1967 | Safety Code for Overhead and Gantry Cranes | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60.593a(b)(2) | ASTM E 168 | 1967 | Standard Practices for General Techniques of Infrared Quantitative Analysis | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.200(c)(3) | ANSI Z53.1 | 1967 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(v)(1) | TFI M-1 | 1966 | Standards for the Storage and Handling of Agricultural Anhydrous Ammonia | Fertilizer Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.5(d)(32) | ASTM E 308 | 1966 | Standard Practice for Spectrophotometry and Description of Color in CIE 1931 System | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S6.3.6(a) | ASTM D 2515 | 1966 | Standard Specification for Kinematic Glass Viscosity | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.253(d)(1)(i)(A) | ASTM B 88 | 1966 | Standard Specification for Seamless Copper Water Tube | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(29) | NFPA 385 | 1966 | Recommended Regulatory Standard for tank Vehicles for Flammable and Combustible Liquids | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(f)(6) | API 650 | 1966 | Welded Steel Tanks for Oil Storage | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(24) | ASTM D 2161 | 1966 | Conversion Tables for SUS | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.158 | NFPA 197 | 1966 | Training for Initial Fire Attack | National Fire Protection Association | |
Labor Department | 41 CFR 50-204.66(a) | CGA G-1 | 1966 | Acetylene | Compressed Gas Association | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(96) | API Standard 2552 | 1966 | USA Standard Method for Measurement and Calibration of Spheres and Spheroids | American Petroleum Institute |
National Highway Traffic Safety Administration | 49 CFR 571.104 S4.1.2 | SAE J-903a | 1966 | Passenger Car Windshield Wiper Systems | Society of Automotive Engineers |