This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(8)(i)(A) | ASTM A 53 | 1969 | Standard Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated, Welded and Seamless | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ACI 533.2R | 1969 | Selection and Use of Materials for Precast Concrete Wall Panels | American Concrete Institute | |
Coast Guard | 30 CFR 75.1107-17 | NFPA 15 | 1969 | Standard for Water Spray Fixed Systems for Fire Protection | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(3) | NFPA 33 | 1969 | Standard for Spray Finishing Using Flammable and Combustible Liquids | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(15)(iv) | ANSI Z99.1 | 1969 | Title Not Found | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(a)(3)(vi) | ANSI B31.1.0a Addendum | 1969 | Code for Pressure Piping Addendum | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.107(l)(3) | NFPA 86A | 1969 | Standard for Oven and Furnaces Design, Location and Equipment | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.110(i)(2)(v) | NFPA 54 | 1969 | Standard for the Installation of Gas Appliances and Gas Piping | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.104(b)(5)(ii) | ANSI Addenda B31.10a | 1969 | Addenda to Code for Pressure Piping | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.602(c)(1)(vi) | ANSI B56.1 | 1969 | Safety Standard for Powered Industrial Trucks | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 179.100-14(a)(1) | AAR Publication | 1969 | AAR Specification for Design, Fabrication and Construction of Freight Cars, Appendix E | Association of American Railroads | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(7)(iv) | ASTM A 53 | 1969 | Standard Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated, Welded and Seamless | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.67(c)(5)(iii) | AWS D10.9 | 1969 | Standard Qualification for Welding Procedures and Welders for Piping and Tubing | American Welding Society | |
Occupational Safety and Health Administration | 29 CFR 1926.453(a)(2) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.110(b)(8)(i)(B) | ASTM A 53 | 1969 | Standard Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated, Welded and Seamless | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.261(i)(4) | ANSI Z88.2 | 1969 | Respiratory Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.155(f) | NFPA 251 | 1969 | Standard Methods of Fire Tests for Building Construction and Materials | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(7) | ASTM B 88 | 1969 | Seamless Copper Water Tube | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1616.5(c)(2)(ii) Footnote 6 | AATCC 34 | 1969 | Fire Resistance of Textile Fabrics | American Association of Textile Chemists and Colorists | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(31) | NFPA 505 | 1969 | Standard for Type Designations, Areas of Use, Maintenance, and Operation of Powered Industrial Trucks | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.57(h)(1)(ii) | NFPA 33 | 1969 | Spray Finishing Using Flammable and Combustible Materials | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1910.67(c)(5)(iv) | AWS D2.0 | 1969 | Specifications for Welding Highway and Railway Bridges | American Welding Society | |
Environmental Protection Agency | 86 FR 34308 | 40 CFR 1066 | SAE J2452 (J2452_199906) | 1969 | Improvements for Heavy-Duty Engine and Vehicle Test Procedures, and Other Technical Amendments | SAE International |
Occupational Safety and Health Administration | 29 CFR 1926.1001(h) | SAE J-394 | 1969 | Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(34) | SAE J-941b | 1969 | Motor Vehicle Driver's Eye Range | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.453(b)(3) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.261(i)(4) | ANSI Z89.1 | 1969 | Safety Requirements for Industrial Head Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.94(c)(2) | NFPA 33 | 1969 | Standard for Spray Finishing Using Flammable and Combustible Material | National Fire Protection Association | |
Occupational Safety and Health Administration | 29 CFR 1926.155(i)(1) | ASTM D 56 | 1969 | Standard Test Method for Flash Point by Tag Closed Tester | ASTM International | |
Research and Special Programs Administration | 49 CFR 172.519(d)(2)(i) | ASTM G 23 | 1969 | Standard Practice for Operating Light Exposure Apparatus (Carbon Arc Type) With and Without Water for Exposure of Nonmetallic Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 60.261(s) Silvery iron | ASTM A 100 | 1969 | Standard Specification for Ferrosilicon | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(aa)(3) | PCSA 3 | 1969 | Mobile Hydraulic Excavator Standards | Power Crane and Shovel Association | |
Occupational Safety and Health Administration | 29 CFR 1926.552(b)(8) | ANSI A10.5 | 1969 | Safety Requirements for Material Hoists | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(q)(20) | NFPA 86A | 1969 | Standard for Oven and Furnaces Design, Location and Equipment | National Fire Protection Association | |
Federal Motor Carrier Safety Administration | 49 CFR 393.69(a)(3) | NFPA 58 | 1969 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
Mine Safety and Health Administration | 30 CFR 77.403-1(d)(1)(ii) | SAE J-394 | 1969 | Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers | Society of Automotive Engineers | |
Food and Drug Administration | 21 CFR 184.1538(b) | FAO Nutrition Meeting Report Series, No. 45A | 1969 | Specifications for Identity and Purity of Some Antibiotics | Joint FAO/WHO Expert Consultation on Protein Quality Evaluation | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-20 | 1969 | Installation Details and Maintenance Standards for Reflective Markers for Airport Runway and Taxiway Centerlines | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(8) | ANSI A17.1c | 1969 | Elevators, Dumbwaiters, Escalators, and Moving Walks Supplement | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(1) | ASTM A 47 | 1968 | Malleable Iron Castings | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(25) | ANSI Z35.2 | 1968 | Specifications for Accident Prevention Tags | American National Standards Institute | |
Coast Guard | 46 CFR 160.055-3(j) | Federal Standard 595A | 1968 | Colors, International Orange, No. 12197 | Federal Specifications Standards and Test Methods | |
Energy Department | 10 CFR 430.2, Definitions, Colored incandescent lamp (2) | Journal of the Optical Society of America | 1968 | Computation of Correlated Color Temperature and Distribution Temperature, A.R. Robertson, Journal of the Optical Society of America, Volume 58, Number 11, November 1968, pages 1528-1535 | Optical Society of America | |
Coast Guard | 46 CFR 160.055-1(a)(3) | Federal Standard 595A | 1968 | Colors | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1910.252(d)(1)(v) | API 1104 | 1968 | Standard for Welding Pipelines and Related Facilities | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(w)(3) | UL 142 | 1968 | Steel Aboveground Tanks for Flammable and Combustible Liquids | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910.262(w)(1) | ASME B&PV Code | 1968 | Code for Unfired Pressure Vessels, Section VIII, Unfired/Pressure Vessels | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.010-5(b)(4) | MIL-P-40619A | 1968 | Plastic Material, Cellular Polystyrene | U.S. Department of Defense | |
Consumer Product Safety Commission | 16 CFR 1402.4(a)(1)(i)(E)(2) | ASTM D 1535 | 1968 | Specifying Color by the Munsell System | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.200-15(c) | ASTM A 47 | 1968 | Standard Specification for Malleable Iron Castings | ASTM International |