Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Standards Incorporated by Reference (SIBR) Database
If you would like to be notified when new records are added to the Standards Incorporated by Reference (SIBR) Database, please click on the button to subscribe to this weekly alert.
Accessing Standards Incorporated by Reference
This database provides information on standards that have been incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
| Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
|---|---|---|---|---|---|---|
| Occupational Safety and Health Administration | 29 CFR 1926.552(d) | ANSI A17.2 | 1960 | Practice for the Inspection of Elevators | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(e)(41) | ANSI K61.1 | 1960 | Safety Requirements for the Storage and Handling of Anhydrous Ammonia | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910.94(a)(4)(i) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
| Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 6.1 | ASTM D1475 | 1960 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1926.57(g)(3)(ix) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
| Federal Aviation Administration | 14 CFR 27.613(d)(2) | MIL-HDBK-17 | 1960 | Plastics for Aerospace Vehicles | U.S. Department of Defense | |
| Occupational Safety and Health Administration | 29 CFR 1926.57(g)(4)(i) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(e)(51) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
| Coast Guard | 46 CFR 172.020(b)(1) | IMO Resolution A.264(VIII) | 1960 | Amendment to Chapter VI of the International Convention for the Safety of Life at Sea | International Maritime Organization | |
| Occupational Safety and Health Administration | 29 CFR 1910.261(h)(2)(ii) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910.94(b)(3)(ix) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1926.57(g)(4)(ii) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(v)(1) | TFI M-1 | 1960 | Standards for the Storage and Handling of Agricultural Anhydrous Ammonia | Fertilizer Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910.94(b)(4)(i) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910.261(g)(1)(i) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910.94(b)(4)(ii) | ANSI Z9.2 | 1960 | Fundamentals Governing the Design and Operation of Local Exhaust Systems | American National Standards Institute | |
| Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24A, Section 6.5 | ASTM D1475 | 1960 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1910.261(a)(4)(iii) | IME Pamphlet No. 17 | 1960 | Safety in the Handling and Use of Explosives | Institute of Makers of Explosives | |
| Occupational Safety and Health Administration | 29 CFR 1926.6(h)(10) | ANSI A17.2 | 1960 | Practice for the Inspection of Elevators (Inspector's Manual) | American National Standards Institute | |
| National Highway Traffic Safety Administration | 49 CFR 571.116 S7.2 | ASTM D1123 | 1959 | Standard Method of Test for Water in Concentrated Engine Anti-Freezes by the Iodine Reagent Method | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1910.110(e)(3)(i), Table H-32 | ASME B&PV Code | 1959 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1910.110(b)(10)(iv), Table H-26 | ASME B&PV Code | 1959 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
| Labor Department | 41 CFR 50-204.66(b) | CGA G-1.3 | 1959 | Acetylene Transmission for Chemical Synthesis | Compressed Gas Association | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(g)(1) | ASME B&PV Code | 1959 | Boiler and Pressure Vessel Code, Section VIII | American National Standards Institute | |
| National Highway Traffic Safety Administration | 49 CFR 571.5(d)(18) | ASTM D1123 | 1959 | Standard Method of Test for Water in Concentrated Engine Antifreezes by the Iodine Reagent Method | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1910.111(d)(4)(ii)(B) | CGA S-1.3 | 1959 | Safety Release Device Standard--Compressed Gas Storage Containers | Compressed Gas Association | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(q)(33) | NFPA 656 | 1959 | Code for the Prevention of Dust Ignition in Spice Grinding Plants | National Fire Protection Association | |
| Federal Motor Carrier Safety Administration | 49 CFR 393.69(a)(2) | NFPA 58 | 1959 | Standard for the Storage and Handling of Liquefied Petroleum Gases | National Fire Protection Association | |
| Coast Guard | 46 CFR 160.026-3(b) | MIL-L-7178 | 1959 | Lacquer, Cellulose Nitrate, Glass for Aircraft | U.S. Department of Defense | |
| Occupational Safety and Health Administration | 29 CFR 1910.110(d)(2), Table H-31 | ASME B&PV Code | 1959 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
| Wage and Hour Division | 29 CFR 570.57(a)(1)(i) | NIST Handbook 69 | 1959 | Maximum Permissible Body Burdens and Maximum Permissible Concentrations of Radionuclides in Air and in Water for Occupational Exposure | National Institute of Standards and Technology, U.S. Department of Commerce | |
| Occupational Safety and Health Administration | 29 CFR 1910.110(h)(2), Table H-34 | ASME B&PV Code | 1959 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1910.103(c)(1)(iv)(A)(1) | CGA S-1.3 | 1959 | Safety Release Device Standard--Compressed Gas Storage Containers | Compressed Gas Association | |
| Occupational Safety and Health Administration | 29 CFR 1917.50(j)(1) | ASME B56.1 | 1959 | Safety Standard for Powered Industrial Trucks | American Society of Mechanical Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1910.111(b)(2)(vi) | ASME B&PV Code | 1959 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1917.3(b)(12) | ASME B56.1 | 1959 | Safety Standard for Powered Industrial Trucks | American Society of Mechanical Engineers | |
| Occupational Safety and Health Administration | 29 CFR 1910.104(b)(6)(iii) | CGA S-1.3 | 1959 | Safety Release Device Standard--Compressed Gas Storage Containers | Compressed Gas Association | |
| Occupational Safety and Health Administration | 29 CFR 1910.263(k)(2)(i) | NFPA 656 | 1959 | Standard for the Prevention of Dust Ignition in Spice Grinding Plants | National Fire Protection Association | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(k)(10) | CGA S-1.3 | 1959 | Safety Release Device Standards-Compressed Gas Storage Containers | Compressed Gas Association | |
| Occupational Safety and Health Administration | 29 CFR 1910.253(e)(6)(i) | CGA Publication | 1958 | Regulator Connection Standard | Compressed Gas Association | |
| Occupational Safety and Health Administration | 29 CFR 1926.152(i)(1)(iii)(A)(3) | API 12B | 1958 | Specification for Bolted Production Tanks, Eleventh Edition | American Petroleum Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(e)(16) | ANSI B15.1 | 1958 | Safety Code for Mechanical Power Transmission Apparatus | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910.106(b)(1)(iii)(A)(3) | API 12B | 1958 | Specification for Bolted Production Tanks | American Petroleum Institute | |
| Occupational Safety and Health Administration | 29 CFR 1926.155(m) | ASTM D323 | 1958 | Test for Vapor Pressure of Petroleum Products (Reid Method) | ASTM International | |
| Occupational Safety and Health Administration | 29 CFR 1910.68(b)(4) | ANSI B15.1 | 1958 | Safety Code for Mechanical Power Transmission Apparatus | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(k)(12) | CGA Publication | 1958 | CGA and RMA Specification for Rubber Welding Hose | Compressed Gas Association | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(k)(13) | CGA Publication | 1958 | Regulator Connection Standard | Compressed Gas Association | |
| Occupational Safety and Health Administration | 29 CFR 1910.261(l)(3) | ANSI B15.1 | 1958 | Safety Code for Mechanical Power Transmission Apparatus | American National Standards Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910.6(f)(2) | API 12B | 1958 | Specification for Bolted Production Tanks | American Petroleum Institute | |
| Occupational Safety and Health Administration | 29 CFR 1910.261(f)(4) | ANSI B15.1 | 1958 | Safety Code for Mechanical Power Transmission Apparatus | American National Standards Institute |