This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort ascending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(13) | SAE J-395 | 1971 | Minimum Performance Criteria for Roll-Over Protective Structures for Crawler Tractors and Crawler-Type Loaders | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(4) | SAE J-237 | 1971 | Minimum Performance Criteria for Brake Systems for Off-Highway Rubber-Tired Front End Loaders and Dozers | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1728.97(a)(5) | RUS Bulletin 50–23 (DT–18) | 1971 | RUS Specification for 60-inch Wood Crossarm Braces | Rural Utilities Service, U.S. Department of Agriculture | |
National Highway Traffic Safety Administration | 49 CFR 572.21(d) | SAE J-211a | 1971 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.2 | 1971 | Rubber Insulating Hoods | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (6) | EPA Method 239.1 | 1971 | Lead (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Consumer Product Safety Commission | 16 CFR 1500.49 (e)(3) | MIL-I-23594B | 1971 | Insulation tape, electrical; high temperature, polytetrafluoroethylene, pressure-sensitive | Defense Standardization Program, Department of Defense | |
National Highway Traffic Safety Administration | 49 CFR 571.301 S7.1.1 | ASTM D 484 | 1971 | Standard Specifications for Hydrocarbon Dry Cleaning Solvent | ASTM International | |
Public Health Service | 42 CFR 51c.503(a)(7)(iii)(A) | ANSI A117.1 | 1971 | Providing Accessibility and Usability for Physically Handicapped People | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5370-7 | 1971 | Airport Construction Controls to Prevent Air Water Pollution | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.023-3(a) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 23, Section 12.5.3.1.1 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.1000(f)(3) | DOI/BOR Publication | 1971 | Safety and Health Regulations for Construction, Part II | Bureau of Reclamation, U.S. Department of Interior | |
Federal Motor Carrier Safety Administration | 49 CFR 393.67(c)(3) | SAE J-476 | 1971 | Dryseal Pipe Threads | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(4) | SAE J-319b | 1971 | Minimum Performance Criteria for Brake Systems for Off-Highway Rubber-Tired Self-Propelled Scrapers | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.1 | 1971 | Rubber Insulating Line Hose | American National Standards Institute | |
Food and Drug Administration | 16 CFR 1402.4(a)(1)(i)(E)(1) | ANSI Z53.1 | 1971 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.179(a)(43) Note | ANSI B30.9 | 1971 | Safety Code for Slings | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5370-7 | 1971 | Airport Construction Controls to Prevent Air Water Pollution | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (7) | EPA Method 160.2 | 1971 | Residue, Non-Filterable (Gravimetric, Dried at 103-105 oC) | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 173.417(a)(3)(i) | ANSI N14.1 | 1971 | Packaging of Uranium Hexafluoride for Transport | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 23, Section 3.1.1 | ASTM D 2986 | 1971 | Standard Method for Evaluation of Air, Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | ASTM International | |
Mine Safety and Health Administration | 30 CFR 75.1107-17 | NFPA 13A | 1971 | Care and Maintenance of Sprinkler Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (11) | EPA Method 289.1 | 1971 | Zinc (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec L-F-1641 | 1971 | Floor Covering, Translucent or Transparent Vinyl Surface with Backing | Federal Specifications Standards and Test Methods | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(4) | SAE J-166 | 1971 | Minimum Performance Criteria for Brake Systems for Off-Highway Trucks and Wagons | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.11(e) | SAE J-211a | 1971 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(17) | ASTM D 93 | 1971 | Test for Flash Point by Pensky Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 153.940(a)(2) | ANSI B16.31 | 1971 | Non-Ferrous Pipe Flanges | American National Standards Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 173.420(a)(2)(i) | ANSI N14.1 | 1971 | Packaging of Uranium Hexafluoride for Transport | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.5 | 1971 | Rubber Insulating Sleeves | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-44A | 1971 | Specification for L-858 Retroreflective Taxiway Guidance Sign | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(2) | SAE Publication | 1971 | SAE Handbook | Society of Automotive Engineers | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-21 | 1971 | Airport Miscellaneous Lighting Visual Aids | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (8) | EPA Method 160.2 | 1971 | Residue, Non-Filterable (Gravimetric, Dried at 103-105 oC) | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.023-4(a) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (22) | USGS I-3271-85 | 1971 | Copper by Flame Atomic Absorption | U.S. Geological Survey | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(4) | SAE J-236 | 1971 | Minimum Performance Criteria for Brake Systems for Rubber Tire Self-Propelled Graders | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (4) | EPA Method 220.1 | 1971 | Copper (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Mine Safety and Health Administration | 30 CFR 28.40(d) | UL 198 | 1971 | Standard for Alternating Current Fuses | Underwriters Laboratories, Inc. | |
Food and Drug Administration | 16 CFR 1505.6(e)(3)(iv) | ANSI C101.1 | 1971 | Standard for Leakage Current for Appliances | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.268(n)(11)(iv) | ANSI J6.6 | 1971 | Rubber Insulating Gloves | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.951(a)(1)(i) | ANSI J6.7 | 1971 | Rubber Matting for Use Around Electrical Apparatus | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-44A | 1971 | Specification for L-858 Retroreflective Taxiway Guidance Sign | Federal Aviation Administration, U.S. Department of Transportation | |
Occupational Safety and Health Administration | 29 CFR 1926.6(dd)(3) | SAE J-166 | 1971 | Trucks and Wagons | Society of Automotive Engineers | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-21 | 1971 | Airport Miscellaneous Lighting Visual Aids | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.023-1(a)(1) | MIL-S-18655C | 1971 | Signal, Smoke and Illumination, Marine, Mark 13, Mod 0. | U.S. Department of Defense | |
Rural Utilities Service | 7 CFR 1755.97(b)(12) | RUS Bulletin 345-184, Form 397e | 1971 | Specifications for Mobile and Fixed Dial Radio Telephone Equipment | Rural Utilities Service, U.S. Department of Agriculture | |
Nuclear Regulatory Commission | 10 CFR 73.26(l)(1) | ANSI MH5.1 | 1971 | Basic Requirements for Cargo Containers | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.1001(h) | SAE Publication | 1971 | SAE Handbook | Society of Automotive Engineers |