This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.103(b)(1)(i)(A)(1) | ASME B&PV Code | 1968 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
National Archives and Records Administration | 36 CFR 1234.3(h)(2) | ASHRAE 62 | 1989 | Ventilation for Acceptable Indoor Air Quality | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.213 S5.9(a) | NHTSA Drawing Package SAS-100-1000 | 1998 | Standard Seat Assembly with Addendum A, Seat Base Weldment | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 143.4(b) Table Note 4 | APHA Standard Methods, 20th Edition | 1998 | Standard Methods for the Examination of Water and Wastewater. 20th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63, Subpart DDDDD, Table 6, 2(e) | ASTM D 95 | 2005 | Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation | ASTM International | |
Energy Department | 10 CFR 434.401.2.1 Table 401.2.1 | NEMA MG-11 | 1993 | Energy Management Guide for Selection and Use of Single-Phase Motors (RS-44) | National Electrical Manufacturers Association | |
Housing and Urban Development Department | 24 CFR 3280.703 | ANSI Z21.5.1/CSA 7.1-M | 1999 | Gas Clothes Dryers Vol. 1 Type 1 Clothes Dryers with Addendum Z21.5.1A | American National Standards Institute | |
Minerals Management Service | 30 CFR 250.901(d)(8) | ASTM C 94/C 94M | 2007 | Standard Specification for Ready-Mixed Concrete | ASTM International | |
Coast Guard | 46 CFR 111.105-7(b) | NFPA 496 | 2003 | Standard for Purged and Pressurized Enclosures for Electrical Equipment | National Fire Protection Association | |
Rural Utilities Service | 7 CFR 1755.703(b)(6) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Health and Human Services Department | 45 CFR 162.1302(b)(2)(i) | NCPDP Publication | 2006 | Batch Standard Implementation Guide, Version 1, Release 2 | National Council for Prescription Drug Programs | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5335-1A | 1970 | Airport Design Standards--Airports Served by Air Carriers--Taxiways (1970, through change 2, 1976) | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 121.200 | ABYC A-3 | 1993 | Recommended Practices and Standards Covering Galley Stoves | American Boat and Yacht Council | |
National Highway Traffic Safety Administration | 49 CFR 572.76(a) | Drawing No. SA 106C 001 | 1997 | Specifications for an Anthropomorphic Test Dummy Representing a 6-year-old Child, sheet 16 | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) Table (Endrin) | EPA Method 508.1 | 1995 | Determination of Chlorinated Pesticides, Herbicides, and Organohalides by Liquid-Solid Extraction and Electron Capture Gas Chromatography | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.105(b)(1)(iv) | GPA 2377 | 1986 | Test for Hydrogen Sulfide and Carbon Dioxide in Natural Gas Using Length of Stain Tubes | Gas Processors Association | |
Housing and Urban Development Department | 24 CFR 3280.703 | UL 181 | 1996 | Factory Made Air Ducts and Connectors, Ninth Edition with 1998 Revisions | Underwriters Laboratories, Inc. | |
Coast Guard | 33 CFR 140.7(b) | IMO Resolution A.414(XI) | 1979 | Code for Construction and Equipment of Mobile Offshore Drilling Units | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 75.6(a)(26) | ASTM D 3177 | 2002 | Standard Test Method for Total Sulfur in the Analysis Sample of Coal and Coke | ASTM International | |
Coast Guard | 46 CFR 160.061-1(a)(2) | MIL-H-2846 | 1965 | Hooks, Fish, Steel | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 1065.1010(g)(1) | SAE 770141 | 1977 | Optimization of a Flame Ionization Detector for Determination of Hydrocarbon in Diluted Automotive Exhausts | Society of Automotive Engineers | |
Surface Mining Reclamation and Enforcement Office | 30 CFR 870.20 Table 2 | ASTM D 2234 | 1989 | Standard Practice for Collection of a Gross Sample of Coal | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (92) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 430 Subpart B, App. D, 1.7 | AHAM HLD-1 | 1974 | AHAM Performance Evaluation Procedure for Household Tumble Type Clothes Dryers | Association of Home Appliance Manufacturers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB Footnote 51 | USGS Open File Report (OFR) 93-125 | 1993 | Methods of Analysis by the U.S. Geological Survey National Water Quality Laboratory—Determination of Inorganic and Organic Constituents in Water and Fluvial Sediments | U.S. Geological Survey | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec LLL-I-535B | 1977 | Insulation Board, Thermal, Cellulosic Fiber | Federal Specifications Standards and Test Methods | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (3) Arsenic | EPA Method 200.8 | 1994 | Metals by ICP-MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 799.9539(b) | OECD No. 474 | 1977 | Guidelines for the Testing of Chemicals, Mammalian Erythrocyte Micronucleus Test | Organization for Economic Cooperation and Development | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASTM F 1007 | 1996 | Standard Specification for Pipe-Line Expansion Joints of the Packed Slip Type for Marine Application | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(a)(2)(ii)(A) | 35 I.A.C. 211 | 1996 | Definitions and General Provisions | State of Illinois | |
Environmental Protection Agency | 40 CFR 265.198(b) | NFPA 30 | 1981 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 98.7(e)(41) | ASTM E 1941 | 2004 | Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys | ASTM International | |
Coast Guard | 46 CFR 56.60-25(b)(6) | SAE J-1942 | 1989 | Hose and Hose Assemblies for Marine Applications | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH Footnote 3 | EPA-600-8-78-017 | 1978 | Microbiological Methods for Monitoring the Environment, Water, and Wastes | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 430, Appendix A, Method 1653 (18.2) | EPA Method 6240 | 1984 | 6240-Chlorinated Phenolics (Interim Standard), Draft Version | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 80.47(m)(4) | ASTM D 6708 | 2013 | Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.8(a) | Drawing No. SA 150 M030 | 1994 | Shoulder-Thorax Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 571.116 S6.10.2(e) | SAE J-1703 | 1995 | Motor Vehicle Brake Fluid | Society of Automotive Engineers | |
Coast Guard | 40 CFR 136.3(a) Table IB (30) | ASTM D 1068C | 2003 | Standard Test Methods for Iron in Water, Atomic Absorption, Graphite Furnace | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.121 S5.2.3.3(b)(1) | SAE J-592 | 1992 | Clearance, Side Marker and Identification Lamps | Society of Automotive Engineers | |
Energy Department | 10 CFR 440 Appendix A | AAMA 1002.10 | 1983 | Voluntary Specifications for Aluminum Insulating Products for Windows and Sliding Glass Doors | American Architectural Manufacturers Association | |
Coast Guard | 46 CFR 160.156-7(b)(3)(ii) | ASTM A 276 | 2008 | Standard Specification for Stainless Steel Bars and Shapes | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA Footnote 16 | Colilert® Method | 2013 | Colilert Test Kit | IDEXX Laboratories | |
Environmental Protection Agency | 40 CFR 63, Subpart PPPP, Appendix A, Section 2.4 | ASTM E 145 | 2003 | Standard Specification for Gravity-Convection and Forced- Ventilation Ovens | ASTM International | |
Research and Special Programs Administration | 49 CFR 179.220-7(d) | ASTM A 240/A 240M | 1994 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels | ASTM International | |
Drug Enforcement Administration | 21 CFR 1311.30(b) | FIPS Publication 140-2 | 2005 | Annex C to FIPS Publication 140-2, Security Requirements for Cryptographic Modules: Approved Random Number Generators | National Institute of Standards and Technology, U.S. Department of Commerce | |
National Highway Traffic Safety Administration | 49 CFR 572.127(k) | SAE J-211 | 1995 | Instrumentation for Impact Tests | Society of Automotive Engineers | |
Food and Drug Administration | 21 CFR 177.1345(b)(1) | ASTM D 1505 | 1990 | Standard Test Method for Density of Plastics by the Density-Gradient Technique | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.111(b)(2)(vi) | ASME B&PV Code | 1959 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.076-31(c)(2) | UL 1191 | 2008 | Standard for Components for Personal Flotation Devices | Underwriters Laboratories, Inc. |