This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization Sort ascending |
---|---|---|---|---|---|---|
Minerals Management Service | 30 CFR 250.1628(b)(3) | API RP 500 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Division 1 and Division 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(74) | API RP 65 | 2002 | Recommended Practice for Cementing Shallow Water Flow Zones in Deepwater Wells | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 83 FR 49262 | 30 CFR 250.880(b)(2) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (b)(2)(v) | ANSI/API Spec. 17D | 2011 | Design and Operation of Subsea Production Systems—Subsea Wellhead and Tree Equipment | American Petroleum Institute |
Research and Special Programs Administration | 49 CFR 192.65(a) | API RP 5L1 | 2002 | Recommended Practice for Railroad Transportation of Line Pipe | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 195.205(b)(3) | API 2510 | 2001 | Design and Construction of LPG Installations | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 260.11(e)(1) | API 2517 | 1989 | Evaporation Loss From External Floating-Roof Tanks, Third Edition | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 261.191(b)(5)(ii) Note | API Publication | 1981 | Guide for Inspection of Refinery Equipment, Chapter XIII, Atmospheric and Low-Pressure Storage Tanks, 4th edition | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(74) | ANSI/API Spec. 17J | 2008 | Specification for Unbonded Flexible Pipe, Third Edition, Contains API Monogram Annex as Part of U.S. National Adoption | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 60.115a(b) | API 2517 | 1980 | Evaporation Loss From External Floating-Roof Tanks | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.307(d) | API 650 | 1998 | Welded Steel Tanks for Oil Storage | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1202(l)(4) | API MPMS | 1994 | Manual of Petroleum Measurement Standards | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(26) | API MPMS | 1991 | Chapter 6—Metering Assemblies, Section 1—Lease Automatic Custody Transfer (LACT) Systems | American Petroleum Institute |
Minerals Management Service | 30 CFR 250.1629(b)(4)(i) | API RP 505 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(90) | API Spec. 16D | 2004 | Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 83 FR 49257 | 30 CFR 250.841(a) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute |
Interior Department | 43 CFR 3174.10(f) | API 21.2 | 1998 | API MPMS Chapter 21—Flow Measurement Using Electronic Metering Systems, Section 2, Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(86) | API MPMS | 1998 | Chapter 21—Flow Measurement Using Electronic Metering Systems, Section 2—Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters; First Edition | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 195.432(c) | API 510 | 1997 | Pressure Vessel Inspection Code | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 75.6(f)(1) | API MPMS | 1995 | Chapter 3, Section 2 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 75.6(f)(2) | API Bulletin 2509 B | 1992 | Shop Testing of Automatic Liquid Level Gages | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(23) | API RP 2I | 2008 | In-Service Inspection of Mooring Hardware for Floating Structures | American Petroleum Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.616(b) | API RP 1162 | 2003 | Public Awareness Programs for Pipeline Operators | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.908(a) | API RP 2A-WSD | 2007 | Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms--Working Stress Design | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(d)(17) | API RP 14J | 2007 | Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities | American Petroleum Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.6(f)(4) | API 12F | 1961 | Specification for Small Welded Production Tanks | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(42) | API MPMS | 1994 | Chapter 11—Physical Properties Data, Addendum to Section 2, Part 2—Compressibility Factors for Hydrocarbons, Correlation of Vapor Pressure for Commercial Natural Gas Liquids | American Petroleum Institute |
Minerals Management Service | 30 CFR 250.802(e)(4)(i) | API RP 505 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 195.3(c) B9 | API 653 | 2003 | Tank Inspection, Repair, Alteration, and Reconstruction | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 52.741(a)(3), True Vapor Pressure | API 2517 | 1980 | Evaporation Loss From External Floating-Roof Tanks | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.901(a)(11) | API RP 2SK | 2005 | Recommended Practice for Design and Analysis of Stationkeeping Systems for Floating Structures | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(24) | API MPMS | 2007 | Chapter 7 | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.114(a) | API RP 500 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Division 1 and Division 2 | American Petroleum Institute | |
Transportation Department | 85 FR 8104 | 49 CFR 192 | API RP 1171 | 2015 | Pipeline Safety: Safety of Underground Natural Gas Storage Facilities | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(59) | API RP 2FPS | 2001 | RP for Planning, Designing, and Constructing Floating Production Systems | American Petroleum Institute |
Minerals Management Service | 30 CFR 250.803(b)(9)(v) | API RP 14G | 2007 | Recommended Practice for Fire Prevention and Control on Open Type Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.801(b) | ANSI/API Spec. Q1 | 2013 | Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.862(e) | API RP 505 | 1997 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | |
Research and Special Programs Administration | 49 CFR 195.3(c) B10 | API 1104 | 2001 | Standard for Welding Pipelines and Related Facilities | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 63.12005 Maximum True Vapor Pressure (1) | API MPMS | 1997 | Evaporative Loss From Floating-Roof Tanks, First Edition, Chapter 19.2 | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.5.1 | API MPMS | 1988 | Chapter 4, Section 3 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(3) | API Bulletin 2INT-EX | 2007 | Interim Guidance for Assessment of Existing Offshore Structures for Hurricane Conditions | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(60) | API RP 14G | 2007 | Recommended Practice for Fire Prevention and Control on Open Type Offshore Production Platforms | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(23) | API MPMS | 2007 | Chapter 6, Section 7 | American Petroleum Institute | |
Minerals Management Service | 30 CFR 250.1202(a)(3)(iv) | API MPMS | 2013 | Chapter 11, Section 1 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(11) | API MPMS | 2001 | Chapter 3—Tank Gauging | American Petroleum Institute |
Minerals Management Service | 30 CFR 250.1628(b)(3) | API RP 505 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Zone 0, Zone 1, and Zone 2 | American Petroleum Institute | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(75) | API RP 75 | 2004 | Recommended Practice for Development of a Safety and Environmental Management Program for Offshore Operations and Facilities | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 83 FR 49262 | 30 CFR 250.880(c)(1)(i) | ANSI/API RP 14B | 2015 | Design, Installation, Operation, Test, and Redress of Subsurface Safety Valve Systems | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 21977 | 30 CFR 250.730 (c) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |