This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort ascending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 197 | 1987 | Standard Specification for Cupola Malleable Iron | ASTM International | |
Coast Guard | 46 CFR 110.10-1(g)(4) | IEC 332-1 | 1993 | Test on Electric Cables Under Fire Conditions, Part 1: Test on a Single Vertical Insulated Wire or Cable | International Electrotechnical Commission | |
Coast Guard | 46 CFR 114.600(b) | NFPA 1963 | 1993 | Fire Hose Connections | National Fire Protection Association | |
Coast Guard | 46 CFR 133.70(b)(3)(ii) | IMO Resolution A.658(16) | 1989 | Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances | International Maritime Organization | |
Coast Guard | 33 CFR 183.114(d) | ASTM D 471 | 1996 | Standard Test Method for Rubber Property--Effect of Liquids | ASTM International | |
Coast Guard | 46 CFR 160.049-3(b) | 46 CFR 164.015 | 2012 | Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shapes | U.S. Coast Guard | |
Coast Guard | 21 CFR 137.105(a) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Coast Guard | 46 CFR 160.002-3(g) | DWG No. F-49-6-1 (Sheet 1) | 2012 | Cutting Pattern and General Arrangement (Adult) | U.S. Coast Guard | |
Coast Guard | 46 CFR 175.400 Flashpoint | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 160.176-13(y)(2) | ASTM D 751A | 1965 | Standard Test Methods for Coated Fabrics | ASTM International | |
Coast Guard | 33 CFR 183.516(c) | ASTM D 1622 | 1993 | Standard Test Method for Apparent Density of Rigid Cellular Plastics | ASTM International | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) | ASTM A 576 | 1995 | Steel Bars, Carbon, Hot-Wrought, Special Quality | ASTM International | |
Coast Guard | 46 CFR 113.30-25(e) | IEC 60529 | 2001 | Degrees of protection provided by enclosures (IP Code) | International Electrotechnical Commission | |
Coast Guard | 46 CFR 160.052-3(d)(2) | MIL-W-530F | 1972 | Webbing, Textile, Cotton, General Purpose, Natural and In Colors | U.S. Department of Defense | |
Coast Guard | 46 CFR 160.174-17(g) | ASTM D 975 | 1998 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 175.600(b) Table | ABYC A-3 | 1993 | Recommended Practices and Standards Covering Galley Stoves | American Boat and Yacht Council | |
Coast Guard | 33 CFR 118.160(d)(2) | FHWA Publication | 1966 | Standard Alphabets for Highway Signs | Federal Highway Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 12.02-11(d)(1) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.060-5(e) | Federal Standard 751A | 1977 | Stitches, Seams, and Stitchings | Federal Specifications Standards and Test Methods | |
Coast Guard | 21 CFR 172.723(b)(2) | AOCS Method Cd 1-25 | 1993 | Iodine Value of Fats and Oils Wijs Method | American Oil Chemists Society | |
Coast Guard | 46 CFR 160.151-15(a) | MIL-C-17415F | 1989 | Cloth, Coated, and Webbing, Inflatable Boat and Miscellaneous Use | U.S. Department of Defense | |
Coast Guard | 46 CFR 160.115-5(b)(1) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 46 CFR 54.15-1(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 110.10-1(g)(18) | IEC 92-301 | 1995 | Amendment 2 Electrical Installation in Ships, Part 301: Equipment-Generators and Motors | International Electrotechnical Commission | |
Coast Guard | 33 CFR 155.140(e)(3) | NFPA 1021 | 2003 | Standard for Fire Officer Professional Qualifications | National Fire Protection Association | |
Coast Guard | 46 CFR 160.135-5(b)(5) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Coast Guard | 46 CFR 160.151-21(b) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(I)(4)(ii) | EPA-600-R-95-131 | 1995 | Method 524.2--Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 60.111a(b) Petroleum liquids | ASTM D 396 | 1998 | Standard Specification for Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 110.10-1(o)(14) | UL 1203 | 2004 | Standard for Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations | Underwriters Laboratories, Inc. | |
Coast Guard | 40 CFR 136.3(a) Table IB (3) | EPA Method 200.9 | 1994 | Metals by Graphite Atomic Absorption, Revision 2.2 | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.151-5(d)(5) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.156-5(b)(8) | ASTM D 790 | 2007 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials | ASTM International | |
Coast Guard | 46 CFR 160.037-1(a)(1) | NIST Publication 440 | 1976 | Color: Universal Language and Dictionary of Names | National Institute of Standards and Technology, U.S. Department of Commerce | |
Coast Guard | 46 CFR 63.05-1(e)(1) | IMO Resolution MEPC.76(40) | 1997 | Standard Specification for Shipboard Incinerators | International Maritime Organization | |
Coast Guard | 46 CFR 182.440 Table 182.440(a)(1) | ASTM B 122/B 122M | 1995 | Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip and Rolled Bar | ASTM International | |
Coast Guard | 46 CFR 160.156-15(e)(1)(vi) | ASTM A 36/A 36M | 2008 | Standard Specification for Carbon Structural Steel | ASTM International | |
Coast Guard | 46 CFR 197.310(a)(1) | ASME B&PV Code | 2013 | Boiler and Pressure Vessel Code, Section VIII, Division 1 | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 109.573(b)(1) | NFPA 306 | 1974 | Control of Gas Hazards on Vessels | National Fire Protection Association | |
Coast Guard | 40 CFR 136.3(a) Table IA | EPA Method 2006.0 | 2002 | Methods for Measuring Acute Toxicity to Freshwater and Marine Organisms, Silverside, Menidia beryllina, Menidia menidia, and Menidia peninsulae, acute | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 162.050-39 | ISO 9377-2 | 2000 | Water Quality—Determination of hydrocarbon oil index—Part 2: Method using solvent extraction and gas chromatography | International Organization for Standardization | |
Coast Guard | 29 CFR 1917.93(b)(1)(i) | ANSI/ISEA Z89.1 | 2003 | Safety Requirements for Industrial Head Protection | International Safety Equipment Association | |
Coast Guard | 34 CFR 668.148(a)(1)(iv) | AERA Publication | 1999 | Testing Individuals of Diverse Linguistic Backgrounds, section of the Standards for Educational and Psychological Testing | American Educational Research Association | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASTM F 682 | 1993 | Wrought Carbon Steel Sleeve-Type Pipe Couplings | ASTM International | |
Coast Guard | 46 CFR 164.120-5(b)(8) | ASTM D 1824 | 2002 | Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates | ASTM International | |
Coast Guard | 33 CFR 127.1503 | NFPA 10 | 1994 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Coast Guard | 46 CFR 182.130 | ABYC P-1 | 1993 | Safe Installation of Exhaust Systems for Propulsion and Auxiliary Engines | American Boat and Yacht Council | |
Coast Guard | 33 CFR 157.450 | IMO Resolution A.601(15) | 1987 | Provision and Display of Maneuvering Information on Board Ships | International Maritime Organization | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(2)(iv) | ASTM D 695 | 2008 | Standard Test Method for Compressive Properties of Rigid Plastics | ASTM International | |
Coast Guard | 46 CFR 108.649(d) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-saving Appliances and Arrangements | International Maritime Organization |