This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort ascending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 80.47(i)(1) | ASTM D 3606 | 2010 | Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 1065.710 Table 1 | ASTM D 5191 | 2013 | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) | ASTM International | |
Rural Utilities Service | 7 CFR 1755.508(l) | NFPA 70 | 1999 | National Electrical Code | National Fire Protection Association | |
Federal Trade Commission | 16 CFR 306.0(b) | ASTM D 2700 | 1992 | Standard Test Method for Knock Characteristics of Motor and Aviation Fuels | ASTM International | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(G) | EPA-600-4-79-020 | 1983 | Methods of Chemical Analysis of Water and Wastes | U.S. Environmental Protection Agency | |
Rural Utilities Service | 7 CFR 1755.910(d)(5)(vii)(A) | ASTM A 569/A 569M | 1991 | Standard Specification for Steel, Carbon (0.15 Maximum Percent), Hot-Rolled Sheet and Strip, Commercial Quality | ASTM International | |
Food and Drug Administration | 21 CFR 177.1030(c)(2) | FDA Publication | 1987 | Determination of Residual Acrylonitrile and Styrene Monomers Gas Chromatographic Internal Standard Method | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 160.077-19(c)(14) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(2) | Drawing No. SA-572-S40 | 1987 | Lower neck force and moment transducer | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IH (5) | EPA Method 1603 | 2009 | Escherichia coli (E. coli) in Water by Membrane Filtration Using Modified membrane-Thermotolerant Escherichia coli Agar (Modified mTEC) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.2354(b)(3)(ii)(A) | ASTM D 6420 | 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 300.915(a)(9)(iii) | ASTM D 445 | 1988 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.208 S10.4.2.1 | SAE J-826 | 1980 | Devices for Use in Defining Vehicle Seating Accommodations | Society of Automotive Engineers | |
Rural Utilities Service | 7 CFR 1755.390(k)(10)(ii) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Energy Department | 10 CFR 440 Appendix A | ASTM C 755 | 1990 | Standard Recommended Practice for Selection for Vapor Barriers for Thermal Insulation | ASTM International | |
Coast Guard | 40 CFR 60.111(b) | ASTM D 975 | 1996 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Zinc) | APHA Method 3120 B | 1998 | Metals by Inductively Coupled Plasma | American Public Health Association | |
Coast Guard | 46 CFR 56.01-2(e)(27) | ASTM A 334/A 334M | 1996 | Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service | ASTM International | |
Environmental Protection Agency | 40 CFR 63.11(b)(6)(ii) | ASTM D 4809 | 1995 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(63) | API RP 53 | 2004 | Recommended Practice for Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute | |
Coast Guard | 46 CFR 160.002-3(b) | Standard Color Reference of America | 2013 | Indian Orange, Cable No. 70072 | Textile Color Association of the United States | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(25) | SAE J-826 | 1992 | Devices for Use in Defining and Measuring Vehicle Seating Accommodation | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (40) | USGS O-3104-83 | 1983 | Whole-water recoverable organophosphate pesticides | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 141.25(a) Table | EPA-520-5-84-006 | 1987 | Radiochemistry Procedures Manual | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.4360 | ASTM D 6228 | 2003 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection | ASTM International | |
Environmental Protection Agency | 40 CFR 60.334(h)(1) | GPA 2377 | 1986 | Test for Hydrogen Sulfide and Carbon Dioxide in Natural Gas Using Length of Stain Tubes | Gas Processors Association | |
Food and Drug Administration | 21 CFR 184.1444(b)(3) | Food Chemicals Codex | 1996 | Maltodextrin | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1538(d) | BSI 4020 | 1974 | Methods for the Estimation and Differentiation of Nisin in Processed Cheese | British Standards Institution | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App D, 1008.2.6.2 | ASTM F 1292 | 1999 | Standard Specification for Impact Attenuation of Surface Systems Under and Around Playground Equipment | ASTM International | |
Coast Guard | 46 CFR 28.330(b) | NFPA 17A | 1994 | Standard for Wet Chemical Extinguishing Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (61) | APHA Method 4500-SiO2 C | 1997 | Silica, Dissolved, Molybdosilicate Method | American Public Health Association | |
Occupational Safety and Health Administration | 29 CFR 1910.261(g)(15)(iv) | ANSI Z87.1 | 1968 | Practice for Occupational and Educational Eye and Face Protection | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.97(a) Note to paragraph (a) | ASTM D 1048 | 2012 | Standard Specification for Rubber Insulating Blankets | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (43) | EPA Method 624 | 1982 | Volatile Organic Compounds by Purge and Trap GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60, Appendix A-5, Method 11, Section 16.0(2) | NGPA 2265 | 1965 | Tentative Method of Determination of Hydrogen Sulfide and Mercaptan Sulfur in Natural Gas | Natural Gas Producers Association | |
Minerals Management Service | 30 CFR 250.803(b)(1)(i) | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section VIII | American Society of Mechanical Engineers | |
Coast Guard | 21 CFR 135.130(c) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Research and Special Programs Administration | 49 CFR 192.153(b) | ASME B&PV Code | 2005 | Boiler and Pressure Vessel Code, Section VIII, Division 2 | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 192/A 192M | 1996 | Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (13) Fluoride | EPA Method 300.1 | 2000 | Ion chromatography - anions | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 52.742(d) | 35 I.A.C. 215, Subpart Y | 1989 | Administrative Code, Sections 215.582, 215.583, and 215.584 | State of Illinois | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(6) | ASTM B 88 | 1966 | Seamless Copper Water Tube | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CI A Kit | 2003 | Chlorine Institute Emergency Kit "A" for 100-lb. & 150-lb. Chlorine Cylinders (with the exception of repair method using Device 8 for side leaks) | Chlorine Institute, Inc. | |
Coast Guard | 46 CFR 28.345(c) | NFPA 302 | 1998 | Fire Protection Standard for Pleasure, and Commercial Motorcraft | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (40) | USGS I-4545-85 | 1985 | Nitrogen, nitrite plus nitrate, total, colorimetric, cadmium reduction-diazotization, automated-segmented flow | U.S. Geological Survey | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) | EPA Method 200.8 | 1994 | Determination of Trace Elements in Water and Wastes by Inductively Coupled Plasma-Mass Spectrometry | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 86.1(c)(1) | ANSI NGV1 | 2006 | Connection Devices, 2nd edition | American National Standards Institute | |
Coast Guard | 33 CFR 156.111(b) | ICS Publication | 1989 | Guide to Helicopter/Ship Operations | International Chamber of Shipping | |
Environmental Protection Agency | 40 CFR 60.17(g)(103) | ASTM D 2622 | 1987 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.94(c)(3)(i) | 29 CFR 1910.107(b)(4) | 2014 | Spray finishing using flammable and combustible materials; Spray booths | Occupational Safety and Health Administration, U.S. Department of Labor |