This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation Sort descending | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | TDG Regulations | 2005 | Transportation of Dangerous Goods Regulations | Canadian Department of Transportation, Transport Canada | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA C-6.1 | 2002 | Standard for Visual Inspection of High Pressure Aluminum Compressed Gas Cylinders | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 588 | 1981 | High-Strength Low-Alloy Structural Steel with 50 ksi Minimum Yield Point to 4 inches Thick | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM E 8 | 1999 | Standard Test Methods for Tension Testing of Metallic Materials | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA C-7 | 2004 | A Guide for the Preparation of Precautionary Markings for Compressed Gas Containers, Appendix A, 6th Edition | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 7225 | 2005 | Gas Cylinders--Precautionary Labels | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 10461 | 2005 | Gas cylinders--Seamless aluminum alloy gas cylinders--Periodic inspection and testing | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ISO 3036 | 1975 | Board-Determination of Puncture Resistance | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ISO 535 | 1991 | Paper and Board--Determination of Water Absorptiveness--Cobb Method | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11119-2 | 2002 | Gas cylinders--Gas cylinders of composite construction--Specification and test methods--Part 2: Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM E 23 | 1998 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM B 162 | 1993 | Standard Specification for Nickel Plate, Sheet, and Strip | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA C-3 | 1994 | Standards for Welding on Thin-Walled Steel Cylinders | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 606 | 1975 | Steel Sheet and Strip, Hot-Rolled and Cold-Rolled, High Strength, Low Alloy, with Improved Atmospheric Corrosion Resistance | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM E 112 | 1996 | Standard Test Method for Determining Average Grain Size | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA G-2.2 | 1985 | Guideline Method for Determining Minimum of 0.2% Water in Anhydrous Ammonia | Compressed Gas Association | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section II | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | TTMA RP No. 61 | 1998 | Performance of Manhole and/or Fill Opening Assemblies | Truck Trailer Manufacturers Association | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM A 302/A 302M | 1993 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum Nickel | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 612 | 1972 | Standard Specification for High-Strength Steel Plates for Pressure Vessels for Moderate and Lower Temperature Service | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | Drawing No. 137-5 | 1996 | Standard for Housing and Manway Covers for Steel Cargo Tanks | Chlorine Institute, Inc. | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA G-4.1 | 1985 | Cleaning Equipment for Oxygen Service | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 1496-3 | 1995 | Series 1 Freight Containers--Specification and Testing--Part 3, Tank containers for Liquids, Gases and Pressurized Dry Bulk | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 7866 | 1999 | Gas Cylinders--Refillable Seamless Aluminum Alloy Gas Cylinders--Design, Construction and Testing | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 10462 | 2005 | Gas cylinders--Transportable cylinders for dissolved acetylene--Periodic inspection and maintenance | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section IX | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | TTMA RP No. 81 | 1997 | Performance of Spring Loaded Pressure Relief Valves | Truck Trailer Manufacturers Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11119-3 | 2002 | Gas cylinders of composite construction--Specification and test methods--Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM A 516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ICAO Publication | 2008 | Technical Instructions for the Safe Transport of Dangerous Goods by Air | International Civil Aviation Organization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 633 | 1979 | Standard Specification for Normalized High-Strength Low Alloy Structural Steel | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | IMDG Code | 2006 | International Maritime Dangerous Goods Code | International Maritime Organization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM E 114 | 1995 | Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA P-20 | 1995 | Standard for the Classification of Toxic Gas Mixtures | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 1496-1 | 1990 | Series 1 Freight Containers--Specification and Testing--Part 1, General Cargo Containers | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM A 285 | 1978 | Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM B 580 | 2000 | Standard Specification for Anodized Oxide Coatings on Aluminum | ASTM International | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ISO 2592 | 1973 | Petroleum Products--Determination of Flash and Fire Points--Cleveland Open Cup Method | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM A 715 | 1981 | Standard Specification for Steel Sheet and Strip, Hot-Rolled, High-Strength, Low-Alloy with Improved Formability | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM E 213 | 1998 | Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA S-1.2 | 1980 | Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 9809-1 | 1999 | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 1: Quenched and Tempered Steel Cylinders with Tensile Strength less than 1 100 MPa | International Organization for Standardization | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | CGA C-8 | 1985 | Standard for Requalification of DOT-3HT Cylinders | Compressed Gas Association | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section V | American Society of Mechanical Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11114-1 | 1997 | Transportable gas cylinders--Compatibility of cylinder and valve materials with gas contents--Part 1: Metallic materials | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | DOE KSS-471 | 1986 | Proposal for Modifications to U.S. Department of Transportation Specification 21PF-1 Fire and Shock Resistant Phenolic Foam-Insulated Metal Overpack | U.S. Department of Energy | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | CGA S-1.1 | 2005 | Pressure Relief Device Standards | Compressed Gas Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 11120 | 1999 | Gas cylinders--Refillable seamless steel tubes of water capacity between 150 L and 3000 L--Design, construction and testing | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM D 1238 | 1990 | Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | IMO SOLAS | 2001 | International Convention for the Safety of Life at Sea | International Maritime Organization |